|
| |
|
|
One span tee beam bridge
Lachová, Alžběta ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
The goal of this bachelor Thesis is to design a single span road bridge. The bridge will transfer a road of a S7,5 category over local river. Three possible variations were designed, from which option A will be used for further design and calculations. This bridge is a monolithic single-girder post-prestressed construction with a span of 24 m. The structure has been calculated for the ultimate limit state and the service limit state. The calculations of the load effects were done manually as well as in software Scia Engineer 19.1.
|
|
| |
|
|
Bridge in the Doubravice village
Cibičková, Viktória ; Strnad, Jiří (referee) ; Panáček, Josef (advisor)
The aim of the bachelor thesis is the design of the bridge structure over the Svitava River. The most preferred variant was selected from three developed studies. The selected load-bearing structure is post-tensioned double girder bridge. It is a single-span bridge with a bridging length 25,27 m. After detailed processing and assessment for the ultimate limit state and usability, detailed drawings and visualisations were produced.
|
|
|
Slab bridge in the Vlaské village
Zemánek, Tomáš ; Olšák, Martin (referee) ; Panáček, Josef (advisor)
Bachelor thesis solves design of perpendicular road bridge over the Morava river in village Vlaské. Bridge object transfers communication of 2nd road class II/312, communication category is S7,5. For design are processed 3 studies. Variant no. 2 was selected for more broad processing. The issue is post-tensioned concrete haunched slab of height 0,900m and lenght 20,850m. Calculation of load is analysed by software SCIA engineer 2015. The design and assessment of the structure are made according to valid standards and regulations.
|
|
|
Road bridge over the Budišovka river
Drabina, Tomáš ; Olšák, Martin (referee) ; Koláček, Jan (advisor)
The purpose of this bachelor’s thesis is to design a prestressed road bridge over the river Budišovka. Three preliminary studies have been proposed out of which one is subject to more detailed design. The span of the bridge is 17.0 metres. The selected solution was assessed for ultimate and serviceability limit states according to ČSN EN 1992-2.
|
|
|
Prestressed concrete slab
Dobeš, Marek ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The aim of this bachelor's thesis is the design and analysis of one-span, perpendicular bridge across the river. Two preliminary studies have been designed and one of them was selected as the most appropriate solution and then further elaborated in more detail. The selected one was prestressed trapezoidal slab with the span of 21 meters. The load effects were calculated using a manual calculation and a program Scia Engineering and then compared. The assessment of ultimate and serviceability limit state was done by manual calculation according to current valid standards.
|
|
|
Bridge across the river Svitava
Mičánek, Ondřej ; Koláček, Jan (referee) ; Nečas, Radim (advisor)
The subject of this bachelor thesis is the design of superstructure of footbridge over the Svitava river. The design is processed by three options. The chosen option is designed as an arch bridge with a lower prestressed bridge deck, suspended on a steel arch. Bridge is designed as perpendicular, simply placed on the outer supports. The lenght of of the superstructure is 46,8 m. and the lenght of the bridging is 44 m. The steel arch is designed as a second stage parabola with a 6 m stiffness. The calculation of load effects was done by SCIA Engineer 2017 software. Design and structural assessment reports are designed according to the valid standards and regulations.
|
|
|
Design of highway bridge formed by beam girder
Řezníček, Martin ; Čihák, Petr (referee) ; Nečas, Radim (advisor)
The aim of diploma thesis is to design a made-up bridge construction over the road network.There were made three studies of bridging which were compared consequently. Two-joint ginder without haunched was selected as the most suitable option and it was designed in details. The construction was assessed according to the ultimate and serviceability limit state.
|
|
|
T-beam road bridge
Lipovský, Václav ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is the design a bridge structure. The bridge will transfer a road of a S7,5 category over local river. Three variants were designed, from which the most suitable one was selected and it was further designed. The selected load-bearing structure is an monolithic post-prestressed single-girder bridge with one span. The span of the structure is 28.0 m. The structure has been detailed processing and assessment of the structure for the ultimate limit state and service limit state. Detailed drawings and visualization followed.
|
guest ::
