|
| |
|
|
Integration od robot in production of pressure tank for common rail system
Krejčí, Monika ; Tůma, Zdeněk (referee) ; Knoflíček, Radek (advisor)
This diploma thesis is about integration process of assembly line automation on rail assembly. In the beginning is introduced Bosch Company, then follows up theoretical part about automation and assembly lines. After theoretical introduction continues description of current state of rail assembly and choice the best line for automation and its detailed description. After that, the work deals with finding of the best solution for line automation. Found solutions are evaluated using the decision matrix. After the best one of them is chosen. There is also calculation of investments, because the one of important conditions is, that payback period has to be less than two years. Next step is choice of the most suitable supplier and integrator, which can cope with all requirements. At the end of thesis is analysis of risks done and thanks to this, are potentials for improvement of workplace safety found.
|
|
|
Welding of pressure vessels
Máca, Martin ; Dohnal, Ivo (referee) ; Daněk, Ladislav (advisor)
The work is focused on the technology of welding pressure vessels. The chosen pressure vessel was one for beer fermentation (also known as CK tank). In addition there are methods of weld inspection and legislative rules for pressure vessels, also mentioned in this work.
|
|
|
Single cylinder compressor
Novák, Jakub ; Nohál, Libor (referee) ; Dvořáček, Jiří (advisor)
This bachelor thesis deals with a design of single cylinder compressor. The thesis contains basic calculations and proposal of compression unit completed with drawing documentation. Finally the thesis proposes the concept of compression unit along with a pressure tank and a drive placed together on the carrying frame.
|
|
|
Application of Pressure Accumulator Injection System on CI Engine
Šiška, Adam ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master’s thesis deals with building the most modern injection systém Common-Rail for four-cylinder tractor diesel engine. The following application is a conversion from a obsolete system with inline injection pumps. Because the costs for this conversion must be minimized, that it is effort of minimal intervention in engine design. First this master’s thesis focuses on the theory of injection systems of diesel engines and related things and then the thesis shows the design conversion supported analytical calculations and FEM analysis of newly designed components.
|
|
|
Welding of pressure vessels
Máca, Martin ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor)
The work is focused on the technology of welding pressure vessels. The chosen pressure vessel was one for beer fermentation (also known as CK tank). In addition there are methods of weld inspection and legislative rules for pressure vessels, also mentioned in this work. A metallographic documentation was compiled for a suggested weld.
|
|
|
Integration od robot in production of pressure tank for common rail system
Krejčí, Monika ; Tůma, Zdeněk (referee) ; Knoflíček, Radek (advisor)
This diploma thesis is about integration process of assembly line automation on rail assembly. In the beginning is introduced Bosch Company, then follows up theoretical part about automation and assembly lines. After theoretical introduction continues description of current state of rail assembly and choice the best line for automation and its detailed description. After that, the work deals with finding of the best solution for line automation. Found solutions are evaluated using the decision matrix. After the best one of them is chosen. There is also calculation of investments, because the one of important conditions is, that payback period has to be less than two years. Next step is choice of the most suitable supplier and integrator, which can cope with all requirements. At the end of thesis is analysis of risks done and thanks to this, are potentials for improvement of workplace safety found.
|
|
| |
|
|
Application of Pressure Accumulator Injection System on CI Engine
Šiška, Adam ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master’s thesis deals with building the most modern injection systém Common-Rail for four-cylinder tractor diesel engine. The following application is a conversion from a obsolete system with inline injection pumps. Because the costs for this conversion must be minimized, that it is effort of minimal intervention in engine design. First this master’s thesis focuses on the theory of injection systems of diesel engines and related things and then the thesis shows the design conversion supported analytical calculations and FEM analysis of newly designed components.
|
|
|
Welding of pressure vessels
Máca, Martin ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor)
The work is focused on the technology of welding pressure vessels. The chosen pressure vessel was one for beer fermentation (also known as CK tank). In addition there are methods of weld inspection and legislative rules for pressure vessels, also mentioned in this work. A metallographic documentation was compiled for a suggested weld.
|
guest ::
