National Repository of Grey Literature 6 records found  Search took 0.01 seconds. 
Porous elements based on granular materials and inorganic binders
Bulejko, Pavel ; Dohnal, Mirko (referee) ; Svěrák, Tomáš (advisor)
Tato diplomová práce zkoumá možnosti tvorby porézních struktur za použití partikulárních materiálů pojených anorganickými pojivy bez dodatečné tepelné úpravy vypalováním. Jako základní pojiva byly použity portlandský a hlinitanový cement a pojiva na bázi alkalicky aktivovaného metakaolinu (geopolymeru). Jako základní kamenivo byl použit karbid křemíku v různých frakcích podle velikosti částic. Byly taktéž použity další zrnité materiály, např. křemenný písek anebo odpadních materiálů (mleté sklo a porcelán) roztříděných do frakcí podle velikosti částic. Byl sledován vliv složení a množství kameniva na vytváření porézní struktury a tím i na mechanické vlastnosti, které byly testovány pomocí mechanických zkoušek. Pevnostní zkoušky byly provedeny na trámečcích 20 × 20 × 100 mm připravených z testovacích směsí. Granulometrické a fázové složení vstupních surovin bylo studováno metodou laserové granulometrie resp. RTG difrakce. Porézní struktura byla studována metodami rtuťové porozimetrie, dále pomocí světelné a rastrovací elektronové mikroskopie a taktéž pyknometrickou metodou. V rámci charakterizace přepážek (terčíky o průměru 90 mm) připravených z jednotlivých materiálů bylo provedeno stanovení efektivní permeability průtokem vzduchu. Dále byly provedeny testy vzlínavosti kapaliny v připravených materiálech. V závěru práce byly provedeny pokusy o filtraci jemných suspenzí přes uvedené přepážky.
Measurement of diffusion coefitients by use of magnetic resonance
Král, Jakub ; Gescheidtová, Eva (referee) ; Bartušek, Karel (advisor)
This Bachelor thesis is focused on imaging techniques based on the principles of nuclear-magnetic resonance. These techniques are one of the most modern studies of physical, chemical and biological properties of substances. Introduction of this work is focused primarily on physical principles. Further in this work attention is given to the method of the PFG-SE but also to more modern multiinterval NMR methods, which removes the systematic measurement errors for heterogeneous materials. Part of the work is also devoted to b-factor calculations for various kinds of pulse sequences. In last part the work is devoted to data processing in Matlab and Marevisi. Selected method from the beginning of the work is than used to measure the diffusion and processing of tissue cultures.
Ordering, transport and rotational dynamics of adsorbed carbon dioxide in metal-organic framework Zn2(BDC)2(DABCO)
Peksa, Mikuláš ; Lang, Jan (advisor) ; Bulánek, Roman (referee) ; Dračínský, Martin (referee)
The work analyzes the dynamics of carbon dioxide adsorbed in crystals of anisotropic metalo-organic frameworks Zn2(BDC)2(DABCO). It utilizes nuclear magnetic resonance methods, namely, the 13 C spetroscopy, the PFG method and the measurement of longitudinal relaxation times. Experimental data are compared with calculation of molecular dynamics. The thesis provides a theoretical model for explaining the temperature dependence of the residual anisotropy of the chemical shift observed in the spectra. The method of measuring diffusion anistropy based on the change of the shape of the 13 C spectra is described. The work determines the theoretical course of dependence of the longitudinal relaxation time on temperature using Redfield's theory. Times characterizing dynamic processes running on a picosecond scale that determine the dynamics of the fluid as a whole are evaluated from the data. 2
Investigation of matter transport in porous materials by means of PFG NMR
Peksa, Mikuláš ; Lang, Jan (advisor) ; Hof, Martin (referee)
Title: Investigation of matter transport by means of PFG NMR Author: Mikuláš Peksa Department of low temperature physics Supervisor: doc. RNDr. Jan Lang, Ph.D. Assistant Supervisor: RNDr. Milan Kočiřík, CSc. (ÚFCH JH AV ČR) Abstract: Estimation of transport-structural parameters such as porosity, tortuosity and surface-to-volume ratio of pores in beds of glass beads is the main goal of this study. These parameters were estimated for 5 samples with different distributions of sizes. The second goal is to probe a possibility to use the same approach to describe the self-diffusion in water solution of LiCl confined in two porous materials based on Al2O3 and glass, respectively. The last goal is the measurement of self-diffusion of water molecules in mesoporous geopolymeric material. Its capability of water transport at long scales have been documented. The measurements of apparent self-diffusion coefficients by means of NMR spectroscopy with pulsed field gradients was major methodology of this work. Keywords: porous material, porosity, tortuosity, self-diffusion, NMR
Measurement of diffusion coefitients by use of magnetic resonance
Král, Jakub ; Gescheidtová, Eva (referee) ; Bartušek, Karel (advisor)
This Bachelor thesis is focused on imaging techniques based on the principles of nuclear-magnetic resonance. These techniques are one of the most modern studies of physical, chemical and biological properties of substances. Introduction of this work is focused primarily on physical principles. Further in this work attention is given to the method of the PFG-SE but also to more modern multiinterval NMR methods, which removes the systematic measurement errors for heterogeneous materials. Part of the work is also devoted to b-factor calculations for various kinds of pulse sequences. In last part the work is devoted to data processing in Matlab and Marevisi. Selected method from the beginning of the work is than used to measure the diffusion and processing of tissue cultures.
Porous elements based on granular materials and inorganic binders
Bulejko, Pavel ; Dohnal, Mirko (referee) ; Svěrák, Tomáš (advisor)
Tato diplomová práce zkoumá možnosti tvorby porézních struktur za použití partikulárních materiálů pojených anorganickými pojivy bez dodatečné tepelné úpravy vypalováním. Jako základní pojiva byly použity portlandský a hlinitanový cement a pojiva na bázi alkalicky aktivovaného metakaolinu (geopolymeru). Jako základní kamenivo byl použit karbid křemíku v různých frakcích podle velikosti částic. Byly taktéž použity další zrnité materiály, např. křemenný písek anebo odpadních materiálů (mleté sklo a porcelán) roztříděných do frakcí podle velikosti částic. Byl sledován vliv složení a množství kameniva na vytváření porézní struktury a tím i na mechanické vlastnosti, které byly testovány pomocí mechanických zkoušek. Pevnostní zkoušky byly provedeny na trámečcích 20 × 20 × 100 mm připravených z testovacích směsí. Granulometrické a fázové složení vstupních surovin bylo studováno metodou laserové granulometrie resp. RTG difrakce. Porézní struktura byla studována metodami rtuťové porozimetrie, dále pomocí světelné a rastrovací elektronové mikroskopie a taktéž pyknometrickou metodou. V rámci charakterizace přepážek (terčíky o průměru 90 mm) připravených z jednotlivých materiálů bylo provedeno stanovení efektivní permeability průtokem vzduchu. Dále byly provedeny testy vzlínavosti kapaliny v připravených materiálech. V závěru práce byly provedeny pokusy o filtraci jemných suspenzí přes uvedené přepážky.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.