|
|
RF power meter
Hlaváč, Štěpán ; Jedlička,, Petr (referee) ; Drexler, Petr (advisor)
This master’s thesis describes various principles of measurement of electromagnetic waves in a free space and on a line. Used sensors and their real parameters are given for every method. The analysis of protections of high-frequency inputs of measuring instruments is done here and the most suitable method and protections of input for realization are chosen. The analysis of design of secondary protection of high-frequency input is done in this project. The protection of input is realized and measured. The suitable method of measurement is chosen as well as the sensor for measurement of power. The block diagram and circuit diagram of the meter of power are designed. According to designed conception the measuring instrument for measurement of power is realized and its single qualities are measured during the realization. In the final part its precision is measured and the evaluation of results is done.
|
|
|
Antenna for receiving of DVB-T signal
Šmarda, Marek ; Lukeš, Zbyněk (referee) ; Pokorný, Michal (advisor)
The content of this work is to study selected antenna systems suitable for receiving of DVB – T. The various antenna systems will be simulated in the program for the simulation of electromagnetic field (e.g, CST Studio) and the simulation results will be commented (e.g. graphs and diagrams of radiation). Selected antenna system will be made and experimentally measured.
|
|
|
Centre-fed microstrip patch antenna
Jireček, Martin ; Láčík, Jaroslav (referee) ; Raida, Zbyněk (advisor)
Systems with extreme bandwidth are part of advanced modern systems at radio high capacitive communication. Originally this technology was intended for radar scan. Thanks to wide frequency band had radar possibility „ see" a behind crimp, e.g. behind woody partitions etc . To his noise immunity, fail safe tapping plus small wattage heftiness began use for datal systŽm function. If is elementary antenna compound from coaxial probe and shorting outlet, it is possible use to actuating separate narrow slot placed in the middle of incandescent dabs. Impedance and radiating characteristics conventionally plumbed phlobaphene antennae excited tape lead and suggested microstrip phlobaphene antennae are experimentally explored plus collated. Explored is so and effect changes slotted longitude slot on characteristics elementary antenna.
|
|
|
Wave propagation in homogeneous line
Brázda, Daniel ; Steinbauer, Miloslav (referee) ; Friedl, Martin (advisor)
This work deals with the propagation of electromagnetic waves. In the theoretical section describes the propagation of waves in the open space and the line. The main objective of this work is to design a new layout laboratory exercises in which students measure the behavior of waves on a homogeneous line. The design include measuring the standing wave ratio (SWR) using the digital SWR meter, measure the voltage measured along the line and measuring the frequency dependence of the input impedance of the line.
|
|
|
Impedance matching of a transmission line in Matlab
Straka, Zdeněk ; Láčík, Jaroslav (referee) ; Štumpf, Martin (advisor)
This bachelor’s thesis is aimed at the impedance matching of transmission lines and at understanding of the Smith chart plotting. In the text are described the basic features of the transmission line theory, i.e. the behavior of voltage and current along the lines in different situations. The construction of the Smith chart is described in detail. The Smith chart serves for the transformation of impedance and reflection coefficient along the transmission line. In conclusion, advantages and disadvantages of the matched transmission line are discussed. The project presents a demonstration program using examples. The program is used for illustrative example of the matched impedance and the behavior of voltage and current along the lines in different situations
|
|
|
SWR and HF power monitor
Gajdušek, Miroslav ; Blansko), (Metra (referee) ; Šebesta, Jiří (advisor)
This work deals with analysis methods continuous measuring systems for measurement standing wave ratio and high frequency power. Reflectometr, provision measuring standing wawe ratio, works in range frequence VHF (145 MHz, 443 MHz), for this width working frequence is used construction reflectometer with directive lead. Measurer HF power works into range 1kW. Further is in work go through problems communications bus for transmission data from unit monitor SWR a HF power into score modulus. With regard to high frequency interference is choice serial communication RS-485 , which is immune against disturbance. Further is designed evaluation unit MASTER, unit SLAVE and modules for measurement power and SWR. In finish is build up the firmware for units.
|
|
|
Wave propagation in homogeneous line
Brázda, Daniel ; Steinbauer, Miloslav (referee) ; Friedl, Martin (advisor)
This work deals with the propagation of electromagnetic waves. In the theoretical section describes the propagation of waves in the open space and the line. The main objective of this work is to design a new layout laboratory exercises in which students measure the behavior of waves on a homogeneous line. The design include measuring the standing wave ratio (SWR) using the digital SWR meter, measure the voltage measured along the line and measuring the frequency dependence of the input impedance of the line.
|
|
|
Wave propagation in homogeneous line
Brázda, Daniel ; Steinbauer, Miloslav (referee) ; Friedl, Martin (advisor)
This work deals with the propagation of electromagnetic waves. In the theoretical section describes the propagation of waves in the open space and the line. The main objective of this work is to design a new layout laboratory exercises in which students measure the behavior of waves on a homogeneous line. The design include measuring the standing wave ratio (SWR) using the digital SWR meter, measure the voltage measured along the line and measuring the frequency dependence of the input impedance of the line.
|
|
|
Antenna for receiving of DVB-T signal
Šmarda, Marek ; Lukeš, Zbyněk (referee) ; Pokorný, Michal (advisor)
The content of this work is to study selected antenna systems suitable for receiving of DVB – T. The various antenna systems will be simulated in the program for the simulation of electromagnetic field (e.g, CST Studio) and the simulation results will be commented (e.g. graphs and diagrams of radiation). Selected antenna system will be made and experimentally measured.
|
|
|
Impedance matching of a transmission line in Matlab
Straka, Zdeněk ; Láčík, Jaroslav (referee) ; Štumpf, Martin (advisor)
This bachelor’s thesis is aimed at the impedance matching of transmission lines and at understanding of the Smith chart plotting. In the text are described the basic features of the transmission line theory, i.e. the behavior of voltage and current along the lines in different situations. The construction of the Smith chart is described in detail. The Smith chart serves for the transformation of impedance and reflection coefficient along the transmission line. In conclusion, advantages and disadvantages of the matched transmission line are discussed. The project presents a demonstration program using examples. The program is used for illustrative example of the matched impedance and the behavior of voltage and current along the lines in different situations
|
guest ::
