|
|
Conceptual design of air- mobil
Podhorský, Matěj ; Zikmund, Pavel (referee) ; Píštěk, Antonín (advisor)
The topic of the thesis is a conceptual design of a roadable aircraft. The comparison of existing concepts is made, as well as description of proposed solution, aircraft mass analysis, basic aerostatic calculations, flight and gust envelope calculation and a design of truss construction of the fuselage. The CS-VLA, alternatively ELSA-K, has been used as a certification base. The compliance to this certification specification is one of the goals of this thesis.
|
|
|
Influence of wing design modification on aircraft polar curve
Mixová, Alexandra ; Matějů, Jiří (referee) ; Navrátil, Jan (advisor)
This thesis focuses on determining the polar curve of Roko NG aircraft, its evaluation and design of possible wing modification; on the influence of said modification on the polar curve and determination of basic flight performance. The introduction explains basic concepts and problems of aerodynamics. The following part discusses the particular type in comparison with similar ultralight aircrafts. Measurement determines the actual polar curve which can be compared to the analytically determined polar curve of the existing airplane, and to the analytically determined polar curve of the plane with modified wing. From this newly defined polar curve, the basic flight performance is expressed and compared with the flight performance of the existing aircraft.
|
|
|
Aerodynamic design of transonic UAV glider
Kóňa, Marián ; Pejchar, Jan (referee) ; Zikmund, Pavel (advisor)
This master thesis is focused on aerodynamic design of transonic glider, which is assigned for following an airliner at cruising regime of flight. Main goal of the thesis is to determine basic geometrical design of airplane with respect to Whitcomb aera rule, mass analysis and drag polar. Weight analysis includes determining center of gravity according to longitudinal static stability margin. The drag polar of the airplane is determine for cruising regime of flight, that means the regime of following an airliner.
|
|
|
Aerodynamic characteristics of airfoils
Foltýn, Pavel ; Cejpek, Jakub (referee) ; Koutník, Tomáš (advisor)
This bachelor´s thesis describes an influence of geometric characteristics of an airfoil on its aerodynamic properties. The first part of the thesis defines airfoil, describes its geometric characteristics, emergence of aerodynamic forces and convection around airfoil. The second part deals with influence of profile geometry on aerodynamic properties of airfoils. It is shown on NACA four and six digit profiles, in their buoyancy and moment lines and polars. The last part deals with wind tunnels and measurement in them. The thesis focuses on forces and moments measurement by force balances and static and total pressure measurement. Velocity measurement is focused on the laser Doppler velocimetry, on the hot-wire velocity probe and PIV method. Very briefly selected flow visualization methods are shown there. Comparison of profile characteristic obtained by measuring in wind tunnels and numerical simulation in Xfoil program is also shown there.
|
|
|
Gliders in Today's Aviation
Schoř, Pavel ; Zikmund, Pavel (referee) ; Šošovička, Róbert (advisor)
The introduction of this bachelor`s thesis deals with a brief history of gliders. Second chapter explains basic principles of unpowered aircraft flight, including the principle, how an unpowered glider can climb. Commonly used take-off methods are also mentioned. In all chapters, the examples are explained on Standard Cirrus glider, because it is very widespread in Czech Republic and is financially well affordable. Third chapter describes natural principles, which are used by glider pilots to gain an altitude. An extra attention is paid to gaining an altitude in thermals. In fourth chapter, the gliders are divided according to their purpose and sporting category. Short description of glider construction is mentioned, including a description of instruments, which are necessary for a cross country flight. The description of cross country flight is mentioned at end of this chapter. Last chapter compares Standard Cirrus glider with SZD 56-2, which is one of the today`s best 15m gliders. The main purpose is to illustrate the progress in glider designing, which was achieved during last 40 years, in the light of previous chapters.
|
|
|
Integration of XFOIL software in MATLAB environment
Křižák, Michal ; Zikmund, Pavel (referee) ; Dofek, Ivan (advisor)
Thesis is concerned with program which is able to run and control XFOIL from MATLAB environment. This program is focused on bulk data processing and plotting of XFOIL results. Thesis is also concerned with brief description of XFOIL and MATLAB, description of profile characteristics and comparison numbers used in calculation by XFOIL.
|
|
|
Influence of wing design modification on aircraft polar curve
Mixová, Alexandra ; Matějů, Jiří (referee) ; Navrátil, Jan (advisor)
This thesis focuses on determining the polar curve of Roko NG aircraft, its evaluation and design of possible wing modification; on the influence of said modification on the polar curve and determination of basic flight performance. The introduction explains basic concepts and problems of aerodynamics. The following part discusses the particular type in comparison with similar ultralight aircrafts. Measurement determines the actual polar curve which can be compared to the analytically determined polar curve of the existing airplane, and to the analytically determined polar curve of the plane with modified wing. From this newly defined polar curve, the basic flight performance is expressed and compared with the flight performance of the existing aircraft.
|
|
|
Aerodynamic design of transonic UAV glider
Kóňa, Marián ; Pejchar, Jan (referee) ; Zikmund, Pavel (advisor)
This master thesis is focused on aerodynamic design of transonic glider, which is assigned for following an airliner at cruising regime of flight. Main goal of the thesis is to determine basic geometrical design of airplane with respect to Whitcomb aera rule, mass analysis and drag polar. Weight analysis includes determining center of gravity according to longitudinal static stability margin. The drag polar of the airplane is determine for cruising regime of flight, that means the regime of following an airliner.
|
|
|
Conceptual design of air- mobil
Podhorský, Matěj ; Zikmund, Pavel (referee) ; Píštěk, Antonín (advisor)
The topic of the thesis is a conceptual design of a roadable aircraft. The comparison of existing concepts is made, as well as description of proposed solution, aircraft mass analysis, basic aerostatic calculations, flight and gust envelope calculation and a design of truss construction of the fuselage. The CS-VLA, alternatively ELSA-K, has been used as a certification base. The compliance to this certification specification is one of the goals of this thesis.
|
|
|
Aerodynamic characteristics of airfoils
Foltýn, Pavel ; Cejpek, Jakub (referee) ; Koutník, Tomáš (advisor)
This bachelor´s thesis describes an influence of geometric characteristics of an airfoil on its aerodynamic properties. The first part of the thesis defines airfoil, describes its geometric characteristics, emergence of aerodynamic forces and convection around airfoil. The second part deals with influence of profile geometry on aerodynamic properties of airfoils. It is shown on NACA four and six digit profiles, in their buoyancy and moment lines and polars. The last part deals with wind tunnels and measurement in them. The thesis focuses on forces and moments measurement by force balances and static and total pressure measurement. Velocity measurement is focused on the laser Doppler velocimetry, on the hot-wire velocity probe and PIV method. Very briefly selected flow visualization methods are shown there. Comparison of profile characteristic obtained by measuring in wind tunnels and numerical simulation in Xfoil program is also shown there.
|
guest ::
