|
|
Renovation of municipality office
John, Josef ; Klubal, Tomáš (referee) ; Ostrý, Milan (advisor)
This thesis deals with the reconstruction of the Adamov municipality,based on a solution of barrier-free building use, overall improvement of the energy performance of the building and creation of new office spaces in the form of a loft. The object is located on a building site in the town Adamov. The object is currently connected to a III. road, parking space and utilities. It is a building with three above-ground floors and one basement floor. The ground plan of the municipality is rectangle-shaped, the maximum outline dimensions of the rectangle are 28.38 x 16.70m. Existing vertical supporting constructions are mason made of fired bricks. The roof frame structure is made of wood, construction framework stagnant stool, fired tiles are used as roofing. Floor surfaces are formed by ceramic tiles or vinyl. The entrance part is covered with a flat roof. The entrance area will be redesigned as a barrier-free, with a connection to the elevator that goes through the entire object. The sanitary facilities in the first and in the second floor will be renovated. Newly created attic floor will be – except for the lift - connected to the interior of the building by a new steel staircase and the walls on this floor will be of a light type. Holes fillings will be changed in the perimeter walls. A thermal insulation of the entire object by a contact heating system will take place. This thesis consists of preparatory work and studies, implementing documentation, text reports, calculations of the thermal technical assessment and fire safety solutions. Project documentation is made in accordance with currently valid laws, regulations and standards.
|
|
|
Energy evaluation of apartment building's attic space
Sluka, Marek ; Dvořáková, Hana (referee) ; Rubina, Aleš (advisor)
The bachelor thesis deals with energy evaluation of apartment building’s attic space at Křenová Street in Brno. The results will be compared with energy consumption values, measured during the last years. The main task is to suggest a more energy efficient solution to the evaluated space. Refrigerants for compression cooling system will be described in the theoretical part of the thesis and, as a result, a refrigerant for the optimized solution will be specified.
|
|
|
Apartment building in Prague - construction and technological studies loft
Pražák, František ; Venkrbec, Václav (referee) ; Vlčková, Jitka Laura (advisor)
The aim of the bachelor´s thesis was to elaborate the construction and technological study, focusing on the loft conversion of the apartment building in Prague 6, the urban district Bubeneč. The construction and technology project addresses for the given technological phase mainly the rules for the building including the facilities of the construction site, summary technical report, budget, technological regulation for the implementation of the roof deck and plasterboard partitions, time plan of the building, budget, proposal of the machine set, qualitative requirements and their provision and occupational safety during realization of the building.
|
|
|
Reconstruction of residential building
Pavlíček, Jan ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this final thesis is prepared detailed project documentation for the reconstruction of apartment building on Karáskovo Square in Brno - Židenice. The existing building is rectangular and is a part of a apartment terraced buildings. Residential building has a basement and three floors and an attic. The main entrance is oriented to the southwest. Foundation structures are concrete, vertical support system is a brick wall, roof structure is wooden roof standing stool with pleated ceramic tiles.
|
|
|
Průzkum a dokumentace krovu
Smejkal, Jakub
This thesis deals with a condition survey of the roof truss of a family house in the village of Kučerov No. 60. The survey serves to evaluate the technical condition of the roof truss and to prepare the necessary documents for the design of the attic construction. The output of the structural and technical survey is a new drawing documentation, a report describing the current state of the structure and a proposal for repairs necessary for the implementation of the loft extension. Two studies of loft extensions are prepared according to the requirements of the property owner with maximum compliance with the legislative requirements.
|
|
|
Nedvědice - návrh půdní vestavby rodinného domu
Trčková, Lucie
The thesis is focused on the design of loft conversion of the family house in Nedvědice. The introductory part of the work contains a brief characterization of the village, where is the house located, the identification of the object and defining the basic requirements of the investor for the intended purpose. After the focus of the object and the development of documentation of the current state are drawn up an alternative disposition and spatial designs of residential under-roof space from which the investor selects the most appropriate solution to possible implementation. For the selected variant is created a design of enclosing, dividing, ceiling and floor constructions with assessment enclosing constructions from the point of view of heat transfer coefficient. The practical outcome of this work is subsequently drawing part of the building design solution to the extent necessary for the implementation, which is complemented by technical description and pricing list of material.
|
|
|
Půdní vestavba
Snopková, Sylva
This diploma thesis deals with the use of loft space of an existing family house for residential purposes. The attic conversion proposes two variants of the apartment layout, as well as the design of new truss structures. Part of the work is a construction-technical survey of the existing loft space. The thesis also includes the composition of the perimeter walls, roof deck and floors. Finally, the cost calculation of the selected attic conversion variant is included.
|
|
|
Průzkum krovu nad hospodářským objektem
Kašparová, Veronika
This bachelor thesis deals with the documentation and building technical survey over an agricultural object. The survey focuses on damaged wooden elements, especially their extent and causes of damage. It includes the evaluation of the existing elements of the roof truss and the roof cladding and the subsequent creation of the drawing documentation. Furthermore, it is possible to read about the assessment of the state of the structure of the roof truss in terms of the possibilities for use in the attic built-in. The work also includes drawing documentation and photographic documentation.
|
|
|
Půdní vestavba
Polanský, Luboš
This thesis describes the design implementation loft above the selected object. The work consists of text and drawings. The text of the first development of construction and technical survey of the current structure and truss ceiling. Furthermore, in the attic stairs and drafted alternative proposals tracks curtain wall, partition wall, ceiling and floor structures. For All proposed structures is then given a list of works with bill of quantities. In the second part of the thesis is prepared drawings of existing and newly designed truss structure under which it is possible to realize the attic.
|
|
|
Renovation of municipality office
John, Josef ; Klubal, Tomáš (referee) ; Ostrý, Milan (advisor)
This thesis deals with the reconstruction of the Adamov municipality,based on a solution of barrier-free building use, overall improvement of the energy performance of the building and creation of new office spaces in the form of a loft. The object is located on a building site in the town Adamov. The object is currently connected to a III. road, parking space and utilities. It is a building with three above-ground floors and one basement floor. The ground plan of the municipality is rectangle-shaped, the maximum outline dimensions of the rectangle are 28.38 x 16.70m. Existing vertical supporting constructions are mason made of fired bricks. The roof frame structure is made of wood, construction framework stagnant stool, fired tiles are used as roofing. Floor surfaces are formed by ceramic tiles or vinyl. The entrance part is covered with a flat roof. The entrance area will be redesigned as a barrier-free, with a connection to the elevator that goes through the entire object. The sanitary facilities in the first and in the second floor will be renovated. Newly created attic floor will be – except for the lift - connected to the interior of the building by a new steel staircase and the walls on this floor will be of a light type. Holes fillings will be changed in the perimeter walls. A thermal insulation of the entire object by a contact heating system will take place. This thesis consists of preparatory work and studies, implementing documentation, text reports, calculations of the thermal technical assessment and fire safety solutions. Project documentation is made in accordance with currently valid laws, regulations and standards.
|
guest ::
