National Repository of Grey Literature 7 records found  Search took 0.00 seconds. 
Polygrafic production PROGRAF
Ptáčková, Eva ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The aim of this Diploma thesis is the elaboration of the project documentation of a construction part for realization of the new building of the production hall and administrative building in a city of Slavkov u Brna. According to the local zoning plan, both buildings are designed on a plot in the development part of the city. The selected plot is conveniently located due to good accessibility to the D1 motorway. The office building will consist of two above-ground floors. On the first floor there will be the management of the company and the head of the press, the economic and commercial department, hygienic facilities. On the second floor there wil be a graphic studio, a day room and a spacious terrace. The construction system of an office building will be a wall longitudinal. The ground plan of the object is rectangular. the roof is designed as a mono-pitched roof. The factory is a single-storey building. Inside the factory hall there will be a polygraphical technological equipment. The location of the machines is only indicative as well as their choice. The hall will have its own equipment equipped with air conditioning and heating. It is designed as a precast concrete frame. The system is designed longitudinal. The object is a rectangular ground plan with a saddle roof.
Masonry Family House Made of Autoclaved Aerated Concrete Blocks
Balážová, Veronika ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The bachelor thesis solves a two-storey family house, with partial basement, roofed with a flat roof. The house is located on the outskirts of a small village Mariánka in western Slovakia. It is designed for the housing of a four-member family. The above-ground floor is designed from Ytong block. External wall of the basement are designed from permanent concrete formwork and thermal insulation. The house is divided into a two-storey part roofed with a vegetation roof and a single-storey part roofed with a walkable flat roof, which is accessible to the second floor. In the northwest part of the house there is a ventilated facade designed from bearing steel grid with non-flammable chipboards. On the first floor there is a vestibule, a corridor with a staircase, a living room connected with a dining room and a kitchen, a food chamber, a separate toilet, a study room and a guest room. The second floor consists of two children's bedrooms, a bedroom with a separate bathroom with a wardrobe. Furthermore, there is a designed bathroom and wardrobe, primarily designed for use by children and a terrace accessed from the corridor. The basement consists of a sauna area, a utility room and a storage space.
Residential Building
Bielesch, Petr ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of this master’s thesis is elaboration of project documentation of a residental building. It is a four above-ground floors residental object with a one underground floor. There are 9 apartments in residental floors, where one of them is designed as a flat with disability facilities. In the underground floor there is built-in garage for 18 cars and apartments accessory like cellars and others areas. Object is covered with flat roofs, most of them are terraces or rooftop gardens.
Medical center in Prostějov
Kubíček, Jan ; Hobzová, Klára (referee) ; Benešová, Romana (advisor)
The aim of this master´s thesis is to elaborate the project documentation of a new-built medical facilty for building permit, in the cadaster area of Prostějov. The building has six medical offices with facilities, pharmacy with the production of drugs and X-ray equipment. The building is simply-shaped, with two aboveground floors. The vertical loadbearing structures are designed from sand-lime blocks. The building is insulated by a ETICS with ventilated facade with green facade. The horizontal loadbearing structures and the staircase are designed from reinforced cast-in-place prefabricated parts. The concept of flat roof is an extensive green roof. The building is heated by gas condensing boiler. The building uses photovoltaics to produce electricity for save non-renewable resources. The building is ventilated using mechanical ventilation. In the third part, an assessment of water management was performed. The project was processed in ArchiCAD and Lumion.
Masonry Family House Made of Autoclaved Aerated Concrete Blocks
Balážová, Veronika ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The bachelor thesis solves a two-storey family house, with partial basement, roofed with a flat roof. The house is located on the outskirts of a small village Mariánka in western Slovakia. It is designed for the housing of a four-member family. The above-ground floor is designed from Ytong block. External wall of the basement are designed from permanent concrete formwork and thermal insulation. The house is divided into a two-storey part roofed with a vegetation roof and a single-storey part roofed with a walkable flat roof, which is accessible to the second floor. In the northwest part of the house there is a ventilated facade designed from bearing steel grid with non-flammable chipboards. On the first floor there is a vestibule, a corridor with a staircase, a living room connected with a dining room and a kitchen, a food chamber, a separate toilet, a study room and a guest room. The second floor consists of two children's bedrooms, a bedroom with a separate bathroom with a wardrobe. Furthermore, there is a designed bathroom and wardrobe, primarily designed for use by children and a terrace accessed from the corridor. The basement consists of a sauna area, a utility room and a storage space.
Polygrafic production PROGRAF
Ptáčková, Eva ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The aim of this Diploma thesis is the elaboration of the project documentation of a construction part for realization of the new building of the production hall and administrative building in a city of Slavkov u Brna. According to the local zoning plan, both buildings are designed on a plot in the development part of the city. The selected plot is conveniently located due to good accessibility to the D1 motorway. The office building will consist of two above-ground floors. On the first floor there will be the management of the company and the head of the press, the economic and commercial department, hygienic facilities. On the second floor there wil be a graphic studio, a day room and a spacious terrace. The construction system of an office building will be a wall longitudinal. The ground plan of the object is rectangular. the roof is designed as a mono-pitched roof. The factory is a single-storey building. Inside the factory hall there will be a polygraphical technological equipment. The location of the machines is only indicative as well as their choice. The hall will have its own equipment equipped with air conditioning and heating. It is designed as a precast concrete frame. The system is designed longitudinal. The object is a rectangular ground plan with a saddle roof.
Residential Building
Bielesch, Petr ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of this master’s thesis is elaboration of project documentation of a residental building. It is a four above-ground floors residental object with a one underground floor. There are 9 apartments in residental floors, where one of them is designed as a flat with disability facilities. In the underground floor there is built-in garage for 18 cars and apartments accessory like cellars and others areas. Object is covered with flat roofs, most of them are terraces or rooftop gardens.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.