|
|
The use of glassgrids in asphalt pavement structure
Sadil, Dominik ; Šperka, Pavel (referee) ; Kudrna, Jan (advisor)
The bachelor thesis deals with the use of fiberglass grids in asphalt layers. These materials are used as reinforcement materials in road construction primarily to partially elimination or delay the formation of cracks in the roadway and to transfer the tensile loads that are distributed to the sub-layers. The bachelor thesis tests the properties asphalt layers reinforced by geogrids by using selected functional tests and also was monitored their behavior between asphalt layers. At the same time, the thesis determines whether these functional tests are practically applicable for asphalt layers with fiberglass grids.
|
|
|
Bituminous mixtures with a higher lifetime using recycled asphalt
Stromecký, Roman ; Musil, Vladimír (referee) ; Kudrna, Jan (advisor)
This diploma thesis deals with a project of asphalt mixtures with high stiffness modulus using R-material. The theoretical part describes the characteristics of these mixtures in the Czech Republic and in Switzerland. Further this part deals with the use of R-material in the Czech Republic and chosen other countries of the world, it also deals with the ways of recycling roads. The theoretical part also deals with the testing methods used. In the practical part two new asphalt mixtures of the high stiffness modulus type with the addition of 25 % R-material are suggested. As a base for these two mixtures a mixture of the high stiffness modulus type, which was taken from an asphalt mixing plant, was used. Tests were run on the binders and several functional tests (stiffness modulus, fatigue resistance, low temperature qualities) wer done on the suggested asphalt mixtures and also the mixture taken from the mixing plant. Consequently, the results were compared. The conclusion of the thesis is devoted to modelling a construction of a road using the program LayEps, which verified if the suggested mixtures could reduce the thickness of roads.
|
|
|
Usage of Rich Bottom Layers
Simkovič, Lukáš ; Hegr, Zdeněk (referee) ; Hýzl, Petr (advisor)
The aim of this diploma thesis is theoretical knowledge of the problems rich bottom layer and practical part of comparison of three asphalt mixtures for base layers using common road bitumen and modified rubber granulate. Selected functional laboratory tests (low temperature, fatigue resistance, bulk density) and stiffnes modules are performed on these mixtures and the results are compared to each other.
|
|
| |
|
|
Shear stress relaxation of bituminous binders in DSR
Musil, Vladimír ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The thesis describes the relaxation properties of bituminous binders determined in dynamic shear rheometer (DSR). Paving bitumen, polymer modified bitumen (PMB) and crumb rubber modified bitumen (CRmB) were chosen for comparison. In order to describe the effects of ageing on asphalt binders relaxation properties, the laboratory simulation of ageing using RTFOT and 3xRTFOT method was performed. For each binder were simultaneously conducted tests of needle penetration, softening point and elastic recovery. Selected bitumens were used for the production of asphalt mixtures. The low-temperature properties tests (TSRST) were performed for these mixtures, when the results were compared to the relaxation properties of binders determined in the DSR.
|
|
|
Swedish and US AR mixture design comparison
Puda, Adam ; Frýbort, David (referee) ; Kudrna, Jan (advisor)
This master's theseis deals with comparison of two design concepts for producting asphalt mixture with CRmB. These design concepts are from Sweden and USA. The theoretical part sets parameters for design of asphalt mixture and chracteristic tests. In the practical part test speciements of design asphatl mixture undergo performace tests that simulate climate and traffic load. Results are compared to mathematical model used in program LayEps.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
|
|
Design of special asphalt mixtures SAL for the repair of cement concrete pavements
Kalfeřt, Martin ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
In this thesis layer with increased resistance to crack propagation (SAL) are designed. The theoretical part describes the SAL layer, further the input materials, their production and design of various mixtures. The following is a description of the tests, which include tests of permanent deformation, crack propagation, low-temperature characteristics, test, flexural strength and relaxation. After the test results and conclusion are stated.
|
|
|
Recycled aggregates to asphalt mixtures of the flexible pavements
Kropáč, Pavel ; Zdřálek, Petr (referee) ; Stehlík, Dušan (advisor)
This thesis deals with the theoretical part of the creation, distribution and recycling of construction and demolition waste. Subsequently covers made from these recycled construction and demolition waste and its potential application in structural layers of the pavement. In the practical part of the thesis deals with monitoring the overall properties of nine asphalt mixtures with different proportion of recycled concrete aggregate and asphalt binder, which are designed and intended for bed asphalt pavement. The recycled concrete aggregate and asphalt are performed various laboratory tests, the results are subjected to a comparison with the relevant standards and TP 210. The conclusion is made price comparisons of asphalt mixtures.
|
|
| |
guest ::
