|
|
Modulation signal source for microwave beacon
Belloň, Michal ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
This project is focused on construction of source of modulation signal for microwave beacon. The output signal is the same as signal, which is generated by PC software WSJT (Weak Signal by Joe Taylor) on PC sound card output. Signal on device output is modulated using by WSJT modulation and its specific JT4 mode. The device output has I and Q components of signal.
|
|
|
Implemetation of signal processing problems for teaching purposes
Ševčík, Zdeněk ; Rajmic, Pavel (referee) ; Mangová, Marie (advisor)
This thesis is focused on Fourier series, phasor diagram, signal resampling and amplitude modulation. All of there problems are analyzed in theoretical part of thesis. Here are derived all three form of Fourier series, described signal sampling, decimation and interpolation. Next thesis is focused on signal modulation and closer deal with amplitude modulation of harmonic and inharmonic signal. In practical part is example of calculation of Fourier siries for a specific signal, example of signal resampling and example of amplitude modulation for harmonic and inharmonic signal. Objective of practical part is creates programs focused on these problems. Programs should be interactive and their purpose is demonstrate the problem to students.
|
|
|
Power line parameters
Kavan, Pavel ; Krajsa, Ondřej (referee) ; Mlýnek, Petr (advisor)
At the beginning is diploma thesis focused on a distribute power line parameters measurement and examination changes of this parameters depending on using of various power line cables. On the basis of measurements is made a transmission channel in Matlab & Simulink, where are executed simulations with power transmission line. The simulated power line is based on measured distribute parameters or physical proportions of cabels. By changing different parts of simulated communication channel is a symbol error rate expressed on the lenght of transmission line.
|
|
|
TV Remote Controller
Bordács, Balázs ; Hála, Ondřej (referee) ; Hermany, Jiří (advisor)
This master’s thesis deals with parameters of the TV Remote Controller. Aim of this work is studying standards of remote controling of TV receiver by the way of infra-red light. For succesful solving of this project is important to learn about the theory of IrDA. In the second part ot this thesis is designed measurement unit for measuring the parameters of the remote control. The measurement unit includes an integrated IR receiver and photodiode for receive IR signals from remote control. The description of measurement unit blocks and principles of measuring parameters are also placed there. The final part is devoted to processing the measurement results of measuring levels and time waveforms of signal in the receiver module, directional characteristics of remote control and receiver. For measuremented unit is created laboratory task including the role specification and protocol.
|
|
|
Complex Insertion of Tutorial System TIMS into Education
Juračka, Jan ; Kacálek, Jan (referee) ; Škorpil, Vladislav (advisor)
This work is getting acquainted with the educational systems Tims in detail from Enoma. It describes basic types of analog and digital modulations, spread spektrum and basics of PCM encoding and decoding. The main emphasis is put on the product TimsBiskit on which is realized the laboratory tasks. Work also include theoretical settings for students, example records and manuals for instructors.
|
|
|
Function generator
Húsek, Jan ; Mišurec, Jiří (referee) ; Káňa, Ladislav (advisor)
Bachelor`s thesis deals with design and realization of one possible solution of function generator with use of integrated circuit XR 2206. This function generator operates in frequency range 10Hz – 100kHz and it is designed to generate square, triangle and sine waveforms with variable duty and output amplitude to 10Vpp. Function generator contains inputs for amplitude and frequency modulation.
|
|
|
Methodology for PLC evaluation in Smart Metering
Rusz, Martin ; Sláčik, Ján (referee) ; Mlýnek, Petr (advisor)
The aim of this work is to acquire basic knowledge about PLC technology and to make a set of measurements focusing on the main parameters of this technology as well as to perform a set of short-term measurements of PLC communication in Smart Metering systems and to design a methodology for testing two real systems. Measurements were made in laboratory conditions on prepared tasks that covered all types of technology, both broadband and narrowband with one or more carriers. In addition, a methodology for testing PLC communications in Smart Metering systems was developed, which was applied to two systems using different technologies. On the basis of the results achieved, it was decided which of the two systems is more suitable for real use according to the methodology and set of short-term measurements.
|
|
|
Smart modul integrated in power plug
Rusz, Martin ; Musil, Petr (referee) ; Mlýnek, Petr (advisor)
The aim of this work is focus on Powerline Communication technology and select a suitable type of broadband integrated circuit for the integration of a broadband communication module into an electrical installation box. In the introduction of this work, the Powerline Communication technology, the principle of communication, individual types of technology, factors influencing the quality of transmission, current possibilities and setting goals necessary for the design of the module are analyzed in detail. The result is a miniaturized functional prototype of a fully integrated broadband PLC modem in a wiring box.
|
|
|
The Optical Fibre Dispersion Effects on Multiplex Transmission Systems
Kyselák, Martin ; Filka, Miloslav (advisor)
This doctoral thesis deals with present trend to turn up the bit rate of the optical fibres making use of wavelenght multiplex systems. There are new theoretical and practical problems caused by the new technologies. Except the known modal dispersion there exist problems caused by chromatical and polarization mode dispersion. In the opening of the thesis the known effects, which influence the payload signal, are introduced. The polarization mode dispersion has the main attention. Within the scope of this thesis there has been programmed the statistical calculator which can analyses the measured values of differential group delay by Monte Carlo calculation. Next meaningful output is the designating application of the optical routes. It is possible to mathematicaly unambiguously define the polarization mode dispersion by Jones, Stokes and Poynting vectors. This complicated calculations are mechanized and in the simulation application make possible to simulate the signification of the PMD influence at different input parameters. The thesis includes the study of the PMD modulation format impact with the results of simulations and confrontation with other scientists results. The significant output are the final practical results examinations, which can be implemented thanks to the possibility of using the FTB-5500B measuring device.
|
|
|
Classification of digital modulation type
Balada, Radek ; Kováč,, Michal (referee) ; Povalač, Karel (advisor)
The aim of master’s thesis is a classification of digital modulation type. The interest in modulation classification has been growing for last years. It has several possible roles in both civilian and military applications such as spectrum sensing, signal confirmation, interference identification, monitoring and so on. Modulation classification is an intermediate step between signal detection and successful demodulation. Therefore the known methods are based on different statistics obtained from received signals. These statistics can be derived from continuous time signals and they hold for sampled signals.
|
guest ::
