|
|
Model of small air press
Uherek, Vítězslav ; Macho, Tomáš (referee) ; Štohl, Radek (advisor)
This thesis deals with design construction of laboratory model of air press and also proposes of safety measures for this machine. Before the design itself, norms concerning machinery construction were surveyed. There are two norms mentioned in the text ČSN EN 61 508 and ČSN EN ISO 13489-1. Next part shows practical demonstration of machine safety analysis using SISTEMA software tool. Changes to the safety measures were made according to the result of this analysis. Important part of this thesis is also design of control software for the air press in RSlogix5000 environment using Ladder logic and also created visualization of pressing process and show up on to visualization panel PanelView 700.
|
|
|
Safety of small press model
Peňáz, Ondřej ; Hynčica, Ondřej (referee) ; Štohl, Radek (advisor)
The work deals with the safety of an air press model. After examining the standards to carry out risk assessment, changes are implemented to compliance with safety requirements. Safety inspection is made according to standard ČSN EN ISO 13489-1. A software SISTEMA was used for the control of safety requirements. Description of a software equipment by Rockwell Automation and design of the control program in RSLogix 5000 in ladder diagram is the part of the work. The control is also proposed by the visualization application FactoryTalk for the touch panel PanelView Plus 600.
|
|
|
Press model included Safety function
Mikyska, Kamil ; Hynčica, Ondřej (referee) ; Štohl, Radek (advisor)
This thesis deal with creation of learning press model included safety function. Hardware implementation and ordering particular components is described. Designed service program is explained. This program is created in development system RS - logix 5000 by ladder diagram language. Panel view is used for better transparent of the process. Service program for this panel is created in development system RS - ViewStudio. Every possibilities of model usage are described.
|
|
|
Safety of pneumatic press model
Nešpor, Tomáš ; Foukal, Roman (referee) ; Štohl, Radek (advisor)
This thesis is concerning functional safety of machinery, concretely safeguard of model of pneumatic press. In the document is briefly introduced norm, which determines safety standards during designing of safe machine. In the next part is mentioned risk assessment written as technical report. In risk assessment are identified possible risks that could appear during working on machine. Furthermore there are listed safety precautions ensuing from assessed risks, list of elements which has been used to safety control of pneumatic press and evaluation of risks according to EN ISO 13849-1 norm. In the part Programming of the device (Programování zařízení) is configuration manual of the device and description of control programme. The description of visualization in FactoryTalk programme is at the end of this thesis.
|
|
|
Control of pneumatic press model
Sikora, Martin ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This thesis deals with improving of the pneumatic press model. The document contains short description of press model. It also focuses on completion of safety and functionality of the machine. There are an analyse and an aplication of instruments in the chapter Choice of instrumentation for change of the pressure force and for the increase of safety of this machine. The chapter Construction of the press model selects the mechanical components and solves the aplication for press model. In the section Extension of the control program there are the analyses of the control algorithms and programs for the safety PLC and PLC for vizualization. The last part of this work is devoted to vizualization, which displays the states of the sensors and safety PLC. In vizualization there is the setting of hand-operated mode or the automatic control mode with different pressing force changing in time.
|
|
|
Modernization of the small press model
Prosecký, Jan ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
The diploma thesis deals with the safety of pneumatic presses and the assessment of risks associated with the operation of this machinery. The theoretical part of the thesis describes a model of a small pneumatic press with its electrical and mechanical components. The task of the thesis was the reconstruction of a small pneumatic press, consisting in the replacement of the original PLC and its necessary components with a more modern model PLC 1769-L33ERMS from Allen-Bradley. The work also includes a risk assessment of the machinery according to EN ISO 12100. According to the risk assessment, the necessary safety modifications were proposed. The proposed safety modifications were later applied and verified. The thesis also deals with the development of the safety PLC program and also the development of the visualization. Finally, the technical documentation with a draft Declaration of Conformity is developed.
|
|
|
Control of pneumatic press model
Sikora, Martin ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This thesis deals with improving of the pneumatic press model. The document contains short description of press model. It also focuses on completion of safety and functionality of the machine. There are an analyse and an aplication of instruments in the chapter Choice of instrumentation for change of the pressure force and for the increase of safety of this machine. The chapter Construction of the press model selects the mechanical components and solves the aplication for press model. In the section Extension of the control program there are the analyses of the control algorithms and programs for the safety PLC and PLC for vizualization. The last part of this work is devoted to vizualization, which displays the states of the sensors and safety PLC. In vizualization there is the setting of hand-operated mode or the automatic control mode with different pressing force changing in time.
|
|
|
Safety of pneumatic press model
Nešpor, Tomáš ; Foukal, Roman (referee) ; Štohl, Radek (advisor)
This thesis is concerning functional safety of machinery, concretely safeguard of model of pneumatic press. In the document is briefly introduced norm, which determines safety standards during designing of safe machine. In the next part is mentioned risk assessment written as technical report. In risk assessment are identified possible risks that could appear during working on machine. Furthermore there are listed safety precautions ensuing from assessed risks, list of elements which has been used to safety control of pneumatic press and evaluation of risks according to EN ISO 13849-1 norm. In the part Programming of the device (Programování zařízení) is configuration manual of the device and description of control programme. The description of visualization in FactoryTalk programme is at the end of this thesis.
|
|
|
Safety of small press model
Peňáz, Ondřej ; Hynčica, Ondřej (referee) ; Štohl, Radek (advisor)
The work deals with the safety of an air press model. After examining the standards to carry out risk assessment, changes are implemented to compliance with safety requirements. Safety inspection is made according to standard ČSN EN ISO 13489-1. A software SISTEMA was used for the control of safety requirements. Description of a software equipment by Rockwell Automation and design of the control program in RSLogix 5000 in ladder diagram is the part of the work. The control is also proposed by the visualization application FactoryTalk for the touch panel PanelView Plus 600.
|
|
|
Model of small air press
Uherek, Vítězslav ; Macho, Tomáš (referee) ; Štohl, Radek (advisor)
This thesis deals with design construction of laboratory model of air press and also proposes of safety measures for this machine. Before the design itself, norms concerning machinery construction were surveyed. There are two norms mentioned in the text ČSN EN 61 508 and ČSN EN ISO 13489-1. Next part shows practical demonstration of machine safety analysis using SISTEMA software tool. Changes to the safety measures were made according to the result of this analysis. Important part of this thesis is also design of control software for the air press in RSlogix5000 environment using Ladder logic and also created visualization of pressing process and show up on to visualization panel PanelView 700.
|
guest ::
