|
|
Design of linear motor with permanent magnets
Čech, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. Each type of currently used linear motors is briefly introduced and also its principle and characteristics are described, including its specific application. The second part of the thesis deals with the design of an equivalent magnetic circuit model of a linear iron-core linear motor. Hereafter, the proposed design will be used to simulate the distribution of magnetic flux in the linear motor. The evaluated flux-density distribution in the air gap is later compared with the results obtained with finite element method. The thrust is then calculated from the flux-density and the estimated value is compared with the value listed in datasheet.
|
|
|
Current transducer's characteristics
Čížek, Ondřej ; Bulín, Tomáš (referee) ; Huzlík, Rostislav (advisor)
In this bachelor thesis are described all used current transducers, the way of their function and at each of them are described their properties. After that is described program LabVIEW and measurement, which happened by using it with specialization on frequency characteristics and their evaluation.
|
|
|
Calculation of induction machine stray looses
Jirásek, Tomáš ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle additional losses in an electric rotary machines and a calculation of these losses for induction machine. The additional losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage.
|
|
|
FEA modelling of synchronous machine
Ficza, Tibor ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca sa zaoberá s modelovaním synchronného stroja s permanentnými magnetmi pomocou metody konečných prvkov. K modelovaniu sme si zvolili 3 fázový synchronný stroj s permanentnými magnetmi na povrchu rotora z firmy VUES. Najprv vypočítame parametre stroja a potom spravíme statický model pomocou programu FEMM a Matlab a budeme hladať možné riešenia na 2D dynamický model. Pomocou programu Ansys Workbench spravíme 3D model tohoto stroja budeme a porovnávať výsledky simulácie.
|
|
|
Stray losses calculation of induction machine
Jirásek, Tomáš ; Hájek, Vítězslav (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle stray losses in induction machine and creation calculation program in MATLAB. The stray losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage. Value of stray losses are different of engine construction especially by it are scoring insulated, uninsulated, straight or slant.
|
|
|
Design of synchronous spoke motor
Kopecký, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
This thesis is focused mainly on the theoretical research of permanent magnet synchronous motors. In addition, various methods of designing the motor‘s magnetic circuit are discussed and their advantages and disadvantages are compared. The reluctance network method is analyzed more thorough, because this method is used for motor designing process. In the last part the results obtained by reluctance network are compared with the results evaluated by finite element method.
|
|
|
Fluxmeter with graphical display of B-H curve
Ježek, Jaroslav ; Mačák, Jaromír (referee) ; Hanák, Pavel (advisor)
This work deals with simple fluxmeter which is able, together with other device, to show hysteresis loop. Hysteresis loop is a graphic expression of dependence of magnetic induction on intensity of magnetic field. Oscilloscope is used to display the hysteresis loop. This device is fully sufficient for the display. The measured objects are solenoids from various kinds of materials with the same shape. The main aim of this work is the design, realization and description of the fluxmeter. The fluxmeter consists of several partial blocks. The first one, on which this work is focused, is signal generator which is able to generace different kinds of signal. The generated signal comes on primary winding of solenoid where a magnetic field on a given intensity rises. An amplifier is used to obtain the sufficient intensity. Next thing this work is focused on is the design of the integrator which is necessary for the correct function of the fluxmeter. As suggested, there is shown the block diagram of linking of individual parts. There are described the measured results at the end of this work.
|
|
|
Electromagnetic actuator of simple objects
Kolek, Andrej ; Dufek, Ivo (referee) ; Hadinec, Michal (advisor)
The main objective of this work is to study the principles of the movement of very small bodies using electromagnetic forces. The first part is acquainted with the theory of electromagnetism and the second part will focus on the already functioning device, called coil gun. In the end, I will make several practical measurments, results will be compared against theoretical assumption and take measure it.
|
|
|
Stray losses in magnetic material in the end of stator packet
Kopecký, Ivo ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
This thesis examines the magnetic field and magnetic flow at the end of the stator synchronous machine. This problem is solid using nonlinear magnetic resistive network, which is simulating by PSpice software. A simple model of stator, consisting of stator plates, air gaps and the two-thumbs, which hold the stator together. All of this is replace magnetic nonlinear resistive network, which is then divided into elements. According to these element is a simplified model solid and analyzed.
|
|
|
Model of synchronous PM machine based on equivalent reluctance network
Sporni, Peter ; Lapčík, Josef (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca pojednáva o problematike vytvárania a simulácie reluktančnej sieti synchrónneho stroja s V tvarovanými permanentnými magnetmi v programe PSpice. Na začiatku sa oboznámime s konštrukciou a parametrami stroja a potom vyvodíme základné rovnice na výpočet každého prvku siete. Vypočítame každý prvok tohto stroja a potom vytvoríme túto sieť v PSpice. Na začiatku je simulovaná sieť statická a všetky magnetické odpory sú lineárne. Neskôr nahradíme lineárne odpory reprezentujúce plechy nelineárnymi a počítame s precovnou teplotou permanentných magnetov. Potom porovnáme naše výsledky s FEM metódou počítanými hodnotami a vypočítame indukované napätie v jednej cievke stroja. Na záver vypočítame výkonovú a momentovú charakteristiku stroja.
|
guest ::
