|
|
Design of linear motor with permanent magnets
Čech, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. Each type of currently used linear motors is briefly introduced and also its principle and characteristics are described, including its specific application. The second part of the thesis deals with the design of an equivalent magnetic circuit model of a linear iron-core linear motor. Hereafter, the proposed design will be used to simulate the distribution of magnetic flux in the linear motor. The evaluated flux-density distribution in the air gap is later compared with the results obtained with finite element method. The thrust is then calculated from the flux-density and the estimated value is compared with the value listed in datasheet.
|
|
|
Field strength measurement
Novák, Tomáš ; Dřínovský, Jiří (referee) ; Nováček, Zdeněk (advisor)
This thesis is focused on problems of measurement of field intensity especially in short-wave zone of received frequencies. To measure the intensity of electric field, it is necessary to use a suitable antenna whose properties and characteristics/parametres meet best the requirements of this measurement. These requirements are analysed/discussed in the introductory part of this thesis. From these requirements resulted one specific solution which is applicable to this problems. This solution is frame antenna which meets /matches best the requirements of this measurement. Furthermore, a complete suggestion for the frame antenna as well as its calculations were discussed. From individually calculated results graphical functionalities were set together that provided the bases for selection of suitable parameters for frame antenna. Then these bases were verified with similar antenna that was available. In second part of this thesis we modified standard antenna modul RFT FMA11 so that there would be a possibility to use it with any selective microvoltmeter.
|
|
|
Current transducer's characteristics
Čížek, Ondřej ; Bulín, Tomáš (referee) ; Huzlík, Rostislav (advisor)
In this bachelor thesis are described all used current transducers, the way of their function and at each of them are described their properties. After that is described program LabVIEW and measurement, which happened by using it with specialization on frequency characteristics and their evaluation.
|
|
|
Current Sensors
Vaculík, Vlastimil ; Červinka, Dalibor (referee) ; Patočka, Miroslav (advisor)
This diploma theisis deals with the theoretical analysis of the known types of current sensors, including for example, current transformers, shunts, and advanced sensors using Hall sensor or Rogowski coil. Subsequently, the rest of the work deals with the issue of current transducers with Hall sensors, without using a ferromagnetic circuit. For optimal currnet measure and overall precision, several possible options are designed and calculated. This includes number of sensing elements and distribution of sensors around the wires. Based on calaculation of magnetic intensity, related 3D charts ale plotted unsing Excel software. These charts illustrate the theoretical calculations of field distribution around conductors for various number of sensor. In the last part, components ale designed for practical implementation and scheme of electrical wiring. According to this scheme there is PCB designed as well. Whole current meter ir practically build and its results are compared with theoretical assumtions that are discussed in conclusion part of this theisis.
|
|
|
Optimalization of vibration microgenerator
Kurfűrst, Jiří ; Hadaš, Zdeněk (referee) ; Ondrůšek, Čestmír (advisor)
The article describes how to produce energy necessary for sensor supply. These generators are used as a local source operating on vibratory principle. Mechanical vibrations that occur in moving machines, in nature etc. are used in order to gain required energy. So are kinesis principles and analysis employed in some of the avaible generators. It also contains patent and literary background research. Work is oriented to solving mechatronic perimeter, in the concrete micro - generator. Mechatronic perimeter piles from seat power control parts and mechanical parts, where common solving equation system leads to correct solving. Mentioned analyses be of consequence for usage optimization methods artificial intelligence. Optimization method are used on optimum solving proposal micro - generator. To inquest dynamism system was used program Simulink (part of MATLAB), generator is buckthorn for f = 17 [Hz] acceleration yam = 0,5g [ms-2]. As a algorithm is used SOMA – All to one.
|
|
|
Calculation of induction machine stray looses
Jirásek, Tomáš ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle additional losses in an electric rotary machines and a calculation of these losses for induction machine. The additional losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage.
|
|
| |
|
|
FEA modelling of synchronous machine
Ficza, Tibor ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
Táto práca sa zaoberá s modelovaním synchronného stroja s permanentnými magnetmi pomocou metody konečných prvkov. K modelovaniu sme si zvolili 3 fázový synchronný stroj s permanentnými magnetmi na povrchu rotora z firmy VUES. Najprv vypočítame parametre stroja a potom spravíme statický model pomocou programu FEMM a Matlab a budeme hladať možné riešenia na 2D dynamický model. Pomocou programu Ansys Workbench spravíme 3D model tohoto stroja budeme a porovnávať výsledky simulácie.
|
|
|
Electromagnetic actuator of simple objects
Kolek, Andrej ; Drexler, Petr (referee) ; Hadinec, Michal (advisor)
The main objective of this work is to study the principles of the movement of very small bodies using electromagnetic forces. The first part is acquainted with the theory of electromagnetismand the second part will focus on the already functioning device, called coil gun. In detail in this work id dissambled design, construction and subsquent results of the measurement of this divice.
|
|
|
Stray losses calculation of induction machine
Jirásek, Tomáš ; Hájek, Vítězslav (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle stray losses in induction machine and creation calculation program in MATLAB. The stray losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage. Value of stray losses are different of engine construction especially by it are scoring insulated, uninsulated, straight or slant.
|
guest ::
