|
|
The Multifunctional building Hlinky
Jarmerová, Eliška ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor) ; Sedláková, Markéta (advisor)
This bachelor thesis presents a design of a multifunctional buiding in Brno – Pisárky. The building should be located in a gap site in the street Hlinky. The plot is situated at the foothill of Žlutý kopec near the premises of Brno Exhibition Centre. The southern part of the plot includes the area of terraced houses. The street is 215m above sea level. This project designs a completion of the street housing development with a fitting construction of a convenient size and type of façade. The project takes into account a non-existing and formerly pulled-down 19th-century object of value concerned by heritage conservation. The former building was significant for its indentation in the line of the adjacent buildings. In the design I try to point out at this element applied for the whole height of the building. The building facade division follows the elements applied for the other objects in the surroundings of the lot. Based on the former analysis, the design utilizes a high potential of the place which had not been met before, mainly its easy centre and transport accessibility, south-facing slope, high density of population in the area of the exhibition centre as well as as university hostels. This multifunctional building is designed to function in three ways – as an office, a living place and a shop with a buffet providing cooked meals. The design preserves and recultivates a garden which will function as an orchard with furniture. The first floor of the object is designed as a reinforced concrete frame which is filled with a wall of cut vertically perforated brick blocks with mineral wool insulation and completed with ventilated façade made of facing bricks. The building has six aboveground floors and one underground floor. The height of the designed building overtops the neighbouring buildings, which is hidden due to the division of the building facade into smaller areas whose function is to achieve better setting of the mass of the building into the frontage.
|
|
|
Commercial building with flats
Kubát, Pavel ; Gintar, Jan (referee) ; Kacálek, Petr (advisor)
This thesis solves the new building of commercial building with flats in vacant space in Prague street in Hořovice. This building is with the cellar in a part of object and it has four floors. Commercial building has rectangular ground plan and it is covered with flat roof. The facade will be furnished with contact thermally insulated system with improved plaster and cladding tape. The object is proposed to be made with brick from block. Ceiling is made from iron-concrete ceiling panels. In the basement there are cellar boxes for the each apartments, store room and boiler room. In the ground floor there are four shops which are directly approachable from the outside. Every shops have own store room, office and restroom. There are also situated pram room for apartments and two stores for household rubbish. The first floor is constructed for offices where two companies can be located. In the second floor there are six apartments. Two of them can be adapted for the person with reduced mobility. The third floor is identical with the second floor.
|
|
|
Air-conditioning of offices in an industrial building
Drexler, Tomáš ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
Aim diploma thesis is design and dimensioning central air - conditioning system of offices in industrial object. To air - conditioning was choose 2nd floor office building. Introduction is devoted short entrance to the areas air - conditioning and survey used air - conditioner systems inclusive basic types and possibility using single air - conditioning system practically. Follows computational part, in which is effected heat loss calculation, summer heat gains air - conditioned object and psychrometr calculation summer and winter operationing air - conditioning system. After calculation needed parameters is effected design distribution air, machine - room air conditioning, dimensioning air channels and ventilators, design incoming and off-take anemostats and their regulations. Next part includes calculation power consumption during the operationing designed air - conditioning system.
|
|
| |
|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
|
Corporate headquarters Dlabaja a.s.
Dlabaja, Adam ; Burianová, Lenka (referee) ; Petříček, Tomáš (advisor)
The project documentation, processed in the framework of the diploma thesis, solves the new building of the administrative building of the building company in the village Lukov u Moravských Budějovic. The building is made of traditional brick technology therm tl. 50 cm, without insulation, ceilings are reinforced concrete, flat roof, vegetation. Vegetation is also part of the facade of the building, which at the same time serves as a root cleaner. The philosophy of the whole design is to create a high-quality working environment for building company employees, a pleasant environment for customers and to best solve the environmental footprint of the building. The building is designed as a modern office building, with space for leisure activities of staff and their visits, taking into account the responsible approach to the development industrial site and the surrounding nature. The building efficiently manages potable, rain and wastewater, the envelope of the building, and the individual structures are designed to make the entire building as energy-consuming as possible, and do not pump irreparably by nature its natural resources in a larger quantity than necessary.
|
|
|
Head Office building company
Malý, Jiří ; Kučera, František (referee) ; Daněk, Lukáš (advisor)
This thesis processes project documentation for headquarters of construction company. Main purpose of building is to facilitate administrative nd manufacturing needs of the company. Building contains of reception, offices, meeting room, restrooms and lock rooms for employees, elevator and workshops. There is underground garage in the basement. Building is going to be situated in Stritez u Policky. Building takes up 1088m2 of land. Vertical structures are mainlymade of concrete and brick blocks. Horizontal structures are made of reinforced concrete panels, roof structure is made of wooden trusses.
|
|
|
Multifunctional object Domamyslice
Hráčková, Eliška ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The subject of this diploma thesis is the design and development of project documentation for the construction of a new building of the multifunctional house Domamyslice. The object will be located in the city of Prostějov in part Domamyslice. The new building will be divided into three separate functional units – restaurant with pizzeria, offices and residential area. It is a four-storey, partially basement multifunctional house with a flat roof based on concrete foundation strips. The structural system is designed in a wall of the ceramic blocks with ceramic ceilings. The windows will be plastic with viewing aluminium profiles. The new building has 40 parking places on the investor’s land. The diploma thesis is processed with the valid standards, laws and decrees of the Czech Republic in the current version.
|
|
| |
|
|
BUT Technology Transfer Centre
Tran, Hoang Long ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The subject of my bachelor’s thesis is a lately constructed building of BUT Technology Transfer Center in the city of Brno - Kralovo pole, in the street Kolejní within University Campus BUT Pod Palackého vrchem. University Campus BUT is in a full expansion and they are still building new buildings. Concept of Technology Transfer Center is concluded in the project Generel from architects Pech and Fixel and it copies the defined shape of parcel. Height of building does not stand out because of the function and purpose of the work. The building consists of offices, laboratories and factory hall.
|
guest ::
