|
|
Mechanical Properties of Microstructural Components of Inorganic Materials
Wasserbauer, Jaromír ; Palou, Martin (referee) ; Drábik,, Milan (referee) ; Havlica, Jaromír (advisor)
Disertační práce se zabývá studiem strukturních a mechanických vlastností anorganických materiálů. Cílem je nalezení jednotlivých fází ve zkoumaném materiálu a hlavně lokalizace (mechanicky) nejslabšího místa, jeho ovlivnění a následně výroba materiálu o lepších mechanických vlastnostech. Z důvodu velkého množství použitých metod je základní teorie vložena vždy na začátku příslušné kapitoly. Taktéž z důvodu značného množství výsledků jsou na konci kapitol uvedeny dílčí závěry. Práce je rozdělena na tři části, kdy první se zabývá seznámením s možnostmi modelování mikro-mechanických vlastností a provedením experimentů umožňujících posouzení rozsahu platnosti některého modelu. V druhé části je provedeno shrnutí současných možností indentačních zkoušek pro měření mechanických vlastností strukturních složek betonu a praktické zvládnutí metodiky vhodné k užití pro výzkum materiálů zkoumaných domovským pracovištěm. V třetí části je navržena metoda identifikace nejslabších článků struktury anorganických pojiv a její ověření na konkrétním materiálu zkoumaném na domovském pracovišti. V této dizertační práci jsou použity tyto metody: kalorimetrie, ultrazvukové testování, jednoosá pevnost v tlaku, nanoindentace, korelativní mikroskopie a rastrovací elektronová mikroskopie s energiově disperzním spektrometrem. Dílčími výsledky jsou kompletní charakterizace cementových materiálů, upřesnění stávajících poznatků a nalezení optimálního postupu pro charakterizaci. Hlavním výsledkem je inovativní přístup vedoucí k pozitivnímu ovlivnění materiálu.
|
|
|
Preparation of Ethyl 2-acetoxypropanoate
Kučerová, Eliška ; Pospíšilová, Aneta (referee) ; Figalla, Silvestr (advisor)
The bachelor thesis focuses on the preparation of ethyl 2-acetoxypropanoate as a potential nonpolar biosolvent. Selected preparation should provide the highest yield possible. For this purpose, a theoretical review of possible syntheses was developed, with emphasis on syntheses based on acetylation of ethyl lactate. The experimental part of the work then focuses in more detail on the possibility of isolating ethyl 2-acetoxypropanoate from the reaction mixture. Product isolation was verified by fractional distillation and extraction method. In the isolated product, the basic physical properties were determined and the spectrum measured by Fourier transformation infrared spectroscopy. Furthermore, the hydrolytic stability of ethyl 2-acetoxypropanoate was investigated and a series of calorimetric measurements were performed. From these measurements, the effect of reaction temperature on reaction rate and product conversion and the effect of catalyst presence was assessed.
|
|
|
Microcalorimetric study of bacterial degradation of oil and its products
Bola, Tomáš ; Benešová, Pavla (referee) ; Krouská, Jitka (advisor)
This bachelor thesis deals with a study of the oil degradation as one of the possible products of petroleum using bacterial stems Pseudomonas Putida a Pseudomonas Chlororaphis. The work is motivated by the research of usability of a method which has not been used for those purposes so far – calorimetric analysis. Using IČ spektrometry (ATR), calorimetry and UV-VIS spectrometry was studied a degree and a character of interactions. Calorimetric analysis showed that the Pseudomonas Putida has bigger abbility of the degradability than Pseudomonas Chlororaphis. There was also detected that the optimal concentration for more effective degradation of oil fuel is 5 g/l and 20 g/l. By measurement of the absorbance deppending on time was verified that the bigger is the concentration of the sample, the higher is the resulted absorbance. Using UV-VIS analysis was determined a quantity of biomass. Using IČ spectometry in the ATR mode (reduced reflectance) was detected structure of the sample and also verified that the bacterial cultures Pseudomonas Putida and Chlororaphis degradated entire amount of petroleum.
|
|
|
Study of hyaluronan-albumin systems using light scattering methods and calorimetry
Sereda, Alena ; Hermannová, Martina (referee) ; Chytil, Martin (advisor)
This thesis, which is a continuation of the previous Bachelor thesis, is dedicated to the study of polyelectrolyte complexes between hyaluronan (HA) and bovine serum albumin (BSA). Interactions between HA and BSA and a formation of complexes were studied by SEC-MALLS method, where a molar mass, a root mean square (rms) radius, a hydronamic radius and an intrinsic viscosity of particles of the system were defined. Furthermore the interactions were studied by calorimetric measurement ITC, where thermodynamic character of complex formation was determined. Additionally, dynamic and electrophoretic light scattering methods (DLS and ELS) were applied, where hydrodynamic radius and a value of the zeta potential were defined. Also the effect of higher temperature on the character and complex formation was examined by SEC-MALLS and ITC measurements. The interactions were confirmed at any of the used media, but with different efficiency. It was also proved that complexes become smaller in their radii and viscosity with growing BSA concentration. Furthermore it was proved, that the high ionic strength hinders surface charges of HA and BSA molecules and minimizes their mutual interactions. At the higher ionic strength the radii of the complexes, their intrinsic viscosity and zeta potential are increased. The higher temperature has only minimal effect on the formation of the complexes.
|
|
|
OPTIMIZATION OF TECHNOLOGICAL PROPERTIES OF CEMENT SAND MIXTURES
Burianová, Klára ; Nová, Iva (referee) ; Neudert, Alois (referee) ; Rusín, Karel (advisor)
The work deals with optimization of the technological properties of cement-sand mixtures. The main objective is to find the correct mixture of the individual components which contribute to the rapid solidification of the mixture, hence shorter dismantling. The content is also of a method of measuring and recording during the plasticity of the mixture. Also assessment of the velocity of hydration heat cement mixture in the initial stage of the solidification process in the course of the strength properties of the mixture. To assess these phenomena was used calorimetric method used for measuring hydration heat cement mixture. Further measurements plasticity mixtures and mechanical and physical methods for measuring the compressive strength with the help of a measuring instrument LRU-D.
|
|
|
High performace cement composites with increased abrasion resistance
Baranov, Dmitry ; Šuleková, Nikola (referee) ; Novotný, Radoslav (advisor)
The bachelor thesis deals with the effect of addition of potassium hydroxide solutions of different concentrations to HPC composites. The study focused mainly on parameters important for the abrasion of the composite such as surface hardness, which was measured in two ways. The first is by using of a manual hardness tester, the second is by a notching method through a drill with a tungsten carbide crown. The samples with the highest concentration of potassium hydroxide had the best results. It was assumed that the cause could be a very thin (400 1000 nm) dense layer on the surface with a predominant content of sulfur and potassium compounds, which was shown on an electron microscope. In addition to the hardness of the surface, other mechanical properties important for cements were monitored. Samples with different KOH concentration were tested for compressive and flexural strength.
|
|
|
Study of hydration of biocolloids
Hývnarová, Lucie ; Sedláček, Petr (referee) ; Klučáková, Martina (advisor)
The subject of this master’s thesis was to examine the hydration properties of selected biocolloids. Specifically, humic substances (fulvic and humic acids), hyaluronic acids in three molecular weights, dextran and chitosan were investigated. Hydration properties of selected biocolloid substances were studied by various methods. The influence of water content during the dissolution of substances and the different time for which water acted on biocolloids were studied. Differential scanning calorimetry DSC measurements resulted in enthalpies and crystallization and melting points. Heat fluxes resulted in the use of perfusion calorimetry. TGA thermogravimetric analysis was used to determine the moisture content of the bioolloids used, after measuring the perfusion calorimeter.
|
|
|
Study of intermolecular interactions by isothermal titration calorimetry
Pšenáková, Katarína ; Obšil, Tomáš (advisor) ; Alblová, Miroslava (referee)
Calorimetric methods are used to studying the mechanism of regulation and control of biological processes at the molecular level. Isothermal titration calorimetry (ITC) is used for monitoring the heat exchange of molecular interactions in an environment with constant temperature. This method is also preferred because of its ability of direct measurement of thermodynamic parameters associated with complex formation. ITC measures mostly the energetics of biochemical reactions or molecular interactions protein-protein, protein-ligand, or enzyme-substrate. Main goals of this bachelor thesis were: (I) to acquire working skills with nano isothermal titration calorimeter; (II) to prepare the DNA-binding domain of human transcription factor FOXO4 (FOXO4-DBD); and (III) to study thermodynamic aspects of the interaction between FOXO4-DBD and the double-stranded DNA containing specific binding motif. FOXO4 protein is one of the four members of a "O" subgroup of forkhead transcription factors FOX, which play an important role in many cellular processes including stress resistance, age control and oncogenesis. Forkhead DNA- binding domain recognizes sequences containing the core motif 5'-(A/C)AA(C/T)A-3' with the binding stoichiometry 1:1. Results of this bachelor thesis show that FOXO4-DBD binds the...
|
|
|
Self-Assembly in Mixture of Surfactants and Stimuli-Responsive Polymers with Complex Architecture
Bogomolova, Anna ; Filippov, Sergej (advisor) ; Štěpánek, Miroslav (referee) ; Hanyková, Lenka (referee)
Title: Self-assembly in mixture of surfactants and stimuli-responsive polymers with complex architecture Author: Anna Bogomolova Department: Physical and Macromolecular Chemistry Supervisor: PhD. Sergey K. Filippov, IMC AS CR, v.v.i. Supervisor's e-mail address: filippov@imc.cas.cz Abstract: The issue of construction of complex multi-block copolymers is currently one of the most researched areas. It became a logic consequence of the continuous development in polymer chemistry. Nowadays, a great interest is attracted to multi- responsive block copolymers. As a rule, they consist of hydrophilic, hydrophobic and responsive blocks. That responsive block can be either thermo-sensitive or pH-sensitive as well as sensitive to some other external stimuli. In the present work, we will try to cover topic of stimuli-responsive block copolymers and their interactions with different types of surfactants. Understanding of polymer/surfactant interactions can be a crucial step for future modeling of drug/polymer or protein(DNA)/surfactant interactions. There is a great interest in the investigation of polymer-surfactant interactions. However, while the homopolymer-surfactant interactions are characterized well enough, the same interactions for block copolymers are poorly described. The main development in the latter topic...
|
|
|
Multidimensional characterization of polyelectrolytes and interpolyelectrolyte complexes in aqueous solutions
Murmiliuk, Anastasiia ; Štěpánek, Miroslav (advisor) ; Šachl, Radek (referee) ; Hoffmann, Ingo (referee)
Multidimensional characterization of polyelectrolytes and interpolyelectrolyte complexes in aqueous solutions Abstract: This PhD thesis is dedicated to the study of polyelectrolytes and their self-assembly in aqueous solutions. The morphology and ionization state of individual polymer chains were investigated as well as their co-assembly with oppositely charged species. First, the charge regulation of short and long weak polyelectrolytes in aqueous solution was investigated to deeper understand their pH-responsive properties. The changes of ionization degree and charge of oligopeptides composed of 5 amino acids with acid side-chains and 5 with basic side chains were followed upon varying the pH in order to reveal the effect of interactions between the like-charged and oppositely charged groups. It was shown that intra-molecular electrostatic interactions and conformational flexibility caused the suppression of the total charge and enhancement of ionization of the peptides. To get an insight into the distribution of local H+ concentration in the proximity of a polyelectrolyte chain, a modified polyelectrolyte structure was used with a fluorescent pH- indicator, covalently attached at the end of the chain. Ionization of the pH-responsive fluorophore revealed its effective pK which was compared with the local...
|
guest ::
