|
|
Cooler for heat pump inverter
Trepka, Petr ; Konečný, Tomáš (referee) ; Hejčík, Jiří (advisor)
Thesis in the introductory section describes the theory of heat pumps, the principle of their functions, including components used in pumps. The thesis includes a description of the air-water heat pump indoor unit, which also includes a frequency converter. Electronic frequency converter produces waste heat that must be cooled. The most extensive part of the work therefore deals with the computational model of heat transfer in the exchanger. The output is a map of all heat pump operating points with checking cooling efficiency of the inverter. In the final part are recommended modifications of the cooler design.
|
|
|
System with AC generator for cell electroporation
Lukoianov, Petr ; Folprecht, Martin (referee) ; Červinka, Dalibor (advisor)
This bachelor thesis is observing a system with AC generator for cell electroporation. The first paragraph keeps an eye on description of methodology of biophysics mechanisms. In the 2nd part several kinds of devices were described. In the last paragraph you can see a non-assembled construction and operating principle of the device. Apart from that the control circuit logic explored and device manual is included.
|
|
|
Frequency filters with untraditional combination of active elements
Filgas, Jaroslav ; Herencsár, Norbert (referee) ; Jeřábek, Jan (advisor)
The Bachelor’s thesis deals with the theory and designing of analog frequency filters of the second order, which operate in current mode and use the untraditional combination of active elements. The filters are designed by means of the autonomous circuits. Active elements used in the design is Multiple Output Current Follower MO-CF, Digitally Controlled Current Amplifier DACA, Generalized Current Mirror and Inverters GCMI, Balanced Operational Transconductance Amplifier BOTA, Inverting Current Conveyor 1st and 3rd Generation ICCI/ICCIII and Universal Voltage Conveyor UVC. The proposed filters work in current mode and their ideal and real models are verified in the simulation environment OrCad. The thesis is structured into five chapters including the conclusion. The first chapter gives the general characteristics of the frequency filters, types of filter functions, types of filters and general equations. The second chapter is devoted to the theory of the active elements. The third charter is about methods of designing and the fourth includes custom designed filters, including their transfer functions and the results verify their functionality in the simulation environment.
|
|
|
Methodology and data evaluation of conformance tests of A1 and A2 power generating modules
Bláha, Michal ; Drápela, Jiří (referee) ; Morávek, Jan (advisor)
The introductory part of the diploma thesis contains basic knowledge of the issue of Power Generating Module (particularly local) and a description of individual categories according to the EU Commission Regulation 2016/631, which are connected to the electricity system in the Czechia. In connection with this classification and the assignment of this work, the individual rules for connecting and operating Power Generating Module of categories A1 and A2 are further described. The work also deals with verifying the compliance and conformity of production modules with applicable legislation. The principles of verification of production units follow the newly proposed standard EN 50 549-10. The benefit of the work lies mainly in the preparation for the creation of a certified workplace, which will deal with custom measurement of production units. This preparation is based not only on the created test manual, but on two other important parts, such as the creation of evaluation scripts and the output protocol. The scripts will be used to process the measured data for individual tests and will provide a suitable graphical output of the unit, which will be placed in the output protocol. This protocol will thus be a comprehensive official measurement output of the tested unit.
|
|
|
Methodology and data evaluation of conformance tests of A1 and A2 power generating modules
Bláha, Michal ; Drápela, Jiří (referee) ; Morávek, Jan (advisor)
The introductory part of the diploma thesis contains basic knowledge of the issue of Power Generating Module (particularly local) and a description of individual categories according to the EU Commission Regulation 2016/631, which are connected to the electricity system in the Czechia. In connection with this classification and the assignment of this work, the individual rules for connecting and operating Power Generating Module of categories A1 and A2 are further described. The work also deals with verifying the compliance and conformity of production modules with applicable legislation. The principles of verification of production units follow the newly proposed standard EN 50 549-10. The benefit of the work lies mainly in the preparation for the creation of a certified workplace, which will deal with custom measurement of production units. This preparation is based not only on the created test manual, but on two other important parts, such as the creation of evaluation scripts and the output protocol. The scripts will be used to process the measured data for individual tests and will provide a suitable graphical output of the unit, which will be placed in the output protocol. This protocol will thus be a comprehensive official measurement output of the tested unit.
|
|
|
System with AC generator for cell electroporation
Lukoianov, Petr ; Folprecht, Martin (referee) ; Červinka, Dalibor (advisor)
This bachelor thesis is observing a system with AC generator for cell electroporation. The first paragraph keeps an eye on description of methodology of biophysics mechanisms. In the 2nd part several kinds of devices were described. In the last paragraph you can see a non-assembled construction and operating principle of the device. Apart from that the control circuit logic explored and device manual is included.
|
|
|
Frequency filters with untraditional combination of active elements
Filgas, Jaroslav ; Herencsár, Norbert (referee) ; Jeřábek, Jan (advisor)
The Bachelor’s thesis deals with the theory and designing of analog frequency filters of the second order, which operate in current mode and use the untraditional combination of active elements. The filters are designed by means of the autonomous circuits. Active elements used in the design is Multiple Output Current Follower MO-CF, Digitally Controlled Current Amplifier DACA, Generalized Current Mirror and Inverters GCMI, Balanced Operational Transconductance Amplifier BOTA, Inverting Current Conveyor 1st and 3rd Generation ICCI/ICCIII and Universal Voltage Conveyor UVC. The proposed filters work in current mode and their ideal and real models are verified in the simulation environment OrCad. The thesis is structured into five chapters including the conclusion. The first chapter gives the general characteristics of the frequency filters, types of filter functions, types of filters and general equations. The second chapter is devoted to the theory of the active elements. The third charter is about methods of designing and the fourth includes custom designed filters, including their transfer functions and the results verify their functionality in the simulation environment.
|
|
|
Cooler for heat pump inverter
Trepka, Petr ; Konečný, Tomáš (referee) ; Hejčík, Jiří (advisor)
Thesis in the introductory section describes the theory of heat pumps, the principle of their functions, including components used in pumps. The thesis includes a description of the air-water heat pump indoor unit, which also includes a frequency converter. Electronic frequency converter produces waste heat that must be cooled. The most extensive part of the work therefore deals with the computational model of heat transfer in the exchanger. The output is a map of all heat pump operating points with checking cooling efficiency of the inverter. In the final part are recommended modifications of the cooler design.
|
guest ::
