|
The Development of Inverse Heat Conduction Problems Focused on Very Fast Processes in Microscales
Bellerová, Hana ; Jaroš, Michal (referee) ; Dohnal, Mirko (referee) ; Raudenský, Miroslav (advisor)
The inverse heat conduction task is solved to determine boundary condition of the heat equation. This work deals with the ways how to increase the accuracy of the results obtained by solving inverse task based on the Beck sequential algorithm. The work is focused on the boundary condition changing very fast. This boundary condition is determinable with difficulty. It is shown that the placement and the type of the thermocouple play major role in accuracy of the calculation. The frequency of measuring and the discriminability of used devices also play a role as well as the setup of parameters in the inverse task. The election of mentioned parameters is described with regard to the speed of cooling. Knowledge from the theoretical part of the work is applied in the experimental part. The cooling intensity is investigated during spraying of the steel sample by water with nanoparticles Al2O3, TiO2, Fe and MWNT at three different concentrations. The experiments were carried out for three spray heights (40, 100, 160 mm), three flow rates (1, 1.5, 2 kg/min) and two types of the nozzle (full cone and solid jet). Surprisingly, the cooling intensity by using nanofluids is lower about 30% in comparison to the cooling intensity of pure water. But there was an exception. The cooling intensity of 1 wt.% of carbon nanotubes in water falling from the full cone nozzle placed in distance of 100 mm from the steel surface was higher about 174%. Finally, the reasons of the behavior of nanofluids are discussed.
|
|
The Development of Inverse Heat Conduction Problems Focused on Very Fast Processes in Microscales
Bellerová, Hana ; Jaroš, Michal (referee) ; Dohnal, Mirko (referee) ; Raudenský, Miroslav (advisor)
The inverse heat conduction task is solved to determine boundary condition of the heat equation. This work deals with the ways how to increase the accuracy of the results obtained by solving inverse task based on the Beck sequential algorithm. The work is focused on the boundary condition changing very fast. This boundary condition is determinable with difficulty. It is shown that the placement and the type of the thermocouple play major role in accuracy of the calculation. The frequency of measuring and the discriminability of used devices also play a role as well as the setup of parameters in the inverse task. The election of mentioned parameters is described with regard to the speed of cooling. Knowledge from the theoretical part of the work is applied in the experimental part. The cooling intensity is investigated during spraying of the steel sample by water with nanoparticles Al2O3, TiO2, Fe and MWNT at three different concentrations. The experiments were carried out for three spray heights (40, 100, 160 mm), three flow rates (1, 1.5, 2 kg/min) and two types of the nozzle (full cone and solid jet). Surprisingly, the cooling intensity by using nanofluids is lower about 30% in comparison to the cooling intensity of pure water. But there was an exception. The cooling intensity of 1 wt.% of carbon nanotubes in water falling from the full cone nozzle placed in distance of 100 mm from the steel surface was higher about 174%. Finally, the reasons of the behavior of nanofluids are discussed.
|