|
|
Automated tuning of drive controller
Adamec, Matúš ; Pohl, Lukáš (referee) ; Blaha, Petr (advisor)
This thesis deals with automated tuning of drive controller. To achieve this goal, system identification is needed. Therefore, the issue of identification is described at the beginning of this thesis. Spectral analysis was selected from many described methods. It was implemented in Matlab and also in C# language where was used averaging and Blackman-Tukey method. The C# application is linked to Beckhoff TwinCAT 3 and TwinCAT 2 runtime sytems that enable connections with real drive. Next, the problem of drive regulation is discussed and the results of using spectral analysis on real drives are shown. At the end of the thesis is described the algorithm of setting the speed controller with different types of frequency converters.
|
|
|
Application of local approximators for control of real mechatronic system
Palaj, Lukas ; Vejlupek, Josef (referee) ; Grepl, Robert (advisor)
Cieľom práce je aplikácia lokálnych aproximátorov pre riadenie reálnych mechatronických sústav pomocou metódy dopredného riadenia predstavujúcej zaujímavú alternatívu k metódam využívajúcim globálne aproximátory. Po ukážkových príkladoch funkcie lokálnych aproximátorov bol navrhnutý algoritmus implementovaný pre riadenie dvoch sústav, elektronickej škrtiacej klapky a výukového modelu magnetickej levitácie, predstavujúcich vysoko nelineárne a nestabilné sústavy. Skúmali sme, či riadiaci algoritmus bude mať pozitívny vplyv na presnosť regulácie, ďalej bola skúmaná jeho schopnosť prispôsobiť sa zmene parametrov sústavy a tiež prípadná možnosť jeho implementácie pre mikrokontrolér znížením vzorkovacej frekvencie. Výsledky ukázali, že riadenie založené na lokálnych modeloch zlepšilo riadenie v porovnaní s jednoduchým PID regulátorom a že má schopnosť adaptability. Veľmi výhodné sa zdá byť jeho použitie pre zariadenia umožnujúce vzorkovaciu frekvenciu do 1 kHz.
|
|
|
Helicopter model control
Štefanisko, Ivan ; Blaha, Petr (referee) ; Pohl, Lukáš (advisor)
In this paper we will introduce the existing model of a helicopter for teaching dynamic systems. Later, we will explore various control options of a model, and design laboratory tasks for the selected subject for bachelor‘s and master‘s study. In becoming acquainted with the model of a helicopter we describe hardware parts and the theoretical mathematical model. We can design controls after we have created a subprograms aimed at raising the rotational angle arms, pulse-width modulation to control the motor speed or creation itself control. The control methods we propose are the Ziegler-Nichols and frequency characteristics. The actual laboratory tasks will be formed with respect to the content of subjects taught bachelor‘s and master‘s study.
|
|
|
Automatic tuning of the DC motor controller
Tran, Adam ; Brablc, Martin (referee) ; Najman, Jan (advisor)
Diploma thesis deals with designing of algorithmus for automatic controller tunning for DC motors. Automatic tuning function consist of system identification and controller parametrization. Cascade control loop was chosen for its robustness and proper DC motor control. For electric system identification of DC motor was used recursive method of instrumental variables, because of noisy signal from current transducer. In the case of identification mechanical system, there were used least sqares method. According to identified parameters, current controller was parametrized by optimum module and revolution controller according symetrcal optimum.
|
|
|
Automatic tuning of the DC motor controller
Tran, Adam ; Brablc, Martin (referee) ; Najman, Jan (advisor)
Diploma thesis deals with designing of algorithmus for automatic controller tunning for DC motors. Automatic tuning function consist of system identification and controller parametrization. Cascade control loop was chosen for its robustness and proper DC motor control. For electric system identification of DC motor was used recursive method of instrumental variables, because of noisy signal from current transducer. In the case of identification mechanical system, there were used least sqares method. According to identified parameters, current controller was parametrized by optimum module and revolution controller according symetrcal optimum.
|
|
|
Automated tuning of drive controller
Adamec, Matúš ; Pohl, Lukáš (referee) ; Blaha, Petr (advisor)
This thesis deals with automated tuning of drive controller. To achieve this goal, system identification is needed. Therefore, the issue of identification is described at the beginning of this thesis. Spectral analysis was selected from many described methods. It was implemented in Matlab and also in C# language where was used averaging and Blackman-Tukey method. The C# application is linked to Beckhoff TwinCAT 3 and TwinCAT 2 runtime sytems that enable connections with real drive. Next, the problem of drive regulation is discussed and the results of using spectral analysis on real drives are shown. At the end of the thesis is described the algorithm of setting the speed controller with different types of frequency converters.
|
|
|
Helicopter model control
Štefanisko, Ivan ; Blaha, Petr (referee) ; Pohl, Lukáš (advisor)
In this paper we will introduce the existing model of a helicopter for teaching dynamic systems. Later, we will explore various control options of a model, and design laboratory tasks for the selected subject for bachelor‘s and master‘s study. In becoming acquainted with the model of a helicopter we describe hardware parts and the theoretical mathematical model. We can design controls after we have created a subprograms aimed at raising the rotational angle arms, pulse-width modulation to control the motor speed or creation itself control. The control methods we propose are the Ziegler-Nichols and frequency characteristics. The actual laboratory tasks will be formed with respect to the content of subjects taught bachelor‘s and master‘s study.
|
|
|
Application of local approximators for control of real mechatronic system
Palaj, Lukas ; Vejlupek, Josef (referee) ; Grepl, Robert (advisor)
Cieľom práce je aplikácia lokálnych aproximátorov pre riadenie reálnych mechatronických sústav pomocou metódy dopredného riadenia predstavujúcej zaujímavú alternatívu k metódam využívajúcim globálne aproximátory. Po ukážkových príkladoch funkcie lokálnych aproximátorov bol navrhnutý algoritmus implementovaný pre riadenie dvoch sústav, elektronickej škrtiacej klapky a výukového modelu magnetickej levitácie, predstavujúcich vysoko nelineárne a nestabilné sústavy. Skúmali sme, či riadiaci algoritmus bude mať pozitívny vplyv na presnosť regulácie, ďalej bola skúmaná jeho schopnosť prispôsobiť sa zmene parametrov sústavy a tiež prípadná možnosť jeho implementácie pre mikrokontrolér znížením vzorkovacej frekvencie. Výsledky ukázali, že riadenie založené na lokálnych modeloch zlepšilo riadenie v porovnaní s jednoduchým PID regulátorom a že má schopnosť adaptability. Veľmi výhodné sa zdá byť jeho použitie pre zariadenia umožnujúce vzorkovaciu frekvenciu do 1 kHz.
|
guest ::
