|
|
The technological stage of the rough substructure of OÚ Ostrá
Kholodniak, Marko ; Doubek, Rostislav (referee) ; Biely, Boris (advisor)
The bachelor's thesis is focused on the implementation and reconstruction of the lower gross structure of the municipal office in Ostrá. The original building has one underground floor, one above ground floor and a non-residential floor. The building is based in a flat manner on the foundation strips, the vertical load-bearing structures are made of full-burnt bricks, the horizontal load-bearing structures above the 1.PP are formed by a monolithic beam ceiling and a reinforced concrete slab supplemented with a steel beam. The extension will have one above-ground floor and one underground floor. The extension will be based on a base plate supplemented with foundation belts around the perimeter of the base plate, which, however, will not have a load-bearing function. The vertical supporting structures will be completely covered with the POROTHERM system, the ceiling above the 1st PP extension will be ŽB monolithic. The work contains a technical report with a focus on the selected technological stage, the situation of the building with wider traffic relations of the transport routes, a list of measures, a technological regulation for the implementation of foundation structures, a drawing and report of the construction site equipment, a time schedule, a design of the machine assembly, an inspection and test plan for the implementation of the foundation construction, safety and health protection at work.
|
|
|
Effect of surface finish on degradation of wood-based structural board due to influence of moisture
Kratochvílová, Erika ; Schmid, Pavel (referee) ; Petro,, Marek (referee) ; Šlanhof, Jiří (advisor)
The aim of this dissertation is the optimisation of surface finishes for application to oriented strand board (OSB) in order to increase its moisture resistance. This is a summary of research focused on experimental verification that the application of surface finish could have significant influence on reducing thickness swelling, increasing weight of OSB due to water absorption and slowing down the rise of water in OSB. There was also verified if application of surface finishes only on the cutting edges could significantly affect the penetration of water into the OSB board. Some of used test methods were based on European technical standards, but were modified in order to determine influence of surface finishes in the long term. Alternative test method was also designed and implemented. The essence of this test method was to determine how high the water can rise in OSB. The research covered 8 different types of surface finishes available on the market. The selected finishes did not require any special treatments to be applied to the surface of the OSB itself. Based on the results, a mutual comparison and evaluation of their effects was carried out.
|
|
|
Technological Solution of the Rough Superstructure of the Municipal House U Muchů
Bystričan, Daniel ; Porwisz, Ondřej (referee) ; Mohapl, Martin (advisor)
The main goal of my bachelor's thesis is the construction-technological solution of the rough superstructure of the Municipal House U Muchů, which is located in the village of Dolní Město near the larger town of Humpolec in Vysočina. This work contains a technical report for the given technological stage, the situation of the construction with wider relations of transport routes, a statement of dimensions for the technological stage, a technological regulation including a balance of resources (item budget together with a graph of the deployment of workers). Furthermore, the content of this work is a drawing of the construction site equipment together with a technical report and construction organization solution for the rough superstructure, a timetable for the given stage, a design of the machine assembly including a comparison of two variants and the selection of the most suitable machine, control and test plans and ensuring work safety. In the last point of this work, I am dedicated to verifying the adhesion and load-bearing capacity of the connecting material, more specifically, it is a polyurethane adhesive for masonry.
|
|
|
Preparation of the implementation of the gross substructure of the service building, Bystřice nad Pernštejnem
Schneider, Jiří ; Kurková, Dita (referee) ; Průcha, Aleš (advisor)
The aim of this bachelor's thesis is the preparation of the implementation of the rough substructure of the operational building in Bystřice nad Pernštejnem. The work deals with technological regulations for foundation structures, including insulation against moisture, for which an itemized budget, inspection and test plan, and time schedule will be drawn up. In addition, this work contains the equipment of the construction site, the coordination situation with wider transport relations, the design of the machine assembly, the principles of construction organization and safety and health protection at work. In addition, details regarding the rough substructure or insulation against moisture and assessment of construction machinery are worked out for the work.
|
|
|
Conversion of agricultural building into a home for the elderly in the village Dubné
Hamerníková, Veronika ; Kopecký, Lukáš (referee) ; Biely, Boris (advisor)
The aim of this bachelor´s thesis is solution of rehabilitation in rebuilding and building modification of agricultural building into old people´s home in Jaronice, which is part of village Dubné. Components of this thesis are technical report of equipment of building site, technological directives of building rehabilitation, control and test plans, proposal of technological directive, plan of safety and health protection during labour activity, environmental plan, budget and working timetable.
|
|
|
Execution of Superstructure of Apartment Building and Local Council Offices in Česká Bělá
Šrámek, Jiří ; Novotný, Michal (referee) ; Nečasová, Barbora (advisor)
The subject of this bachelor thesis is the structural technological project of new apartement building and local council offices in Česká Bělá. The thesis contains technological regulations of making damp-proofing, vertical structures from Porotherm clay system and half-precast clay-concrete Miako floor structures. Technological regulations are attached to checking and testing plans, design of site equipment including engineering report, assessment transport routes and proposal of machine assemblies. The other supplements are occupational safety, time schedule, budget and calculation by THU.
|
|
|
The influence of crystallization additives to waterproof concrete
Rosecký, Pavel ; Louda, Pavel (referee) ; Hela, Rudolf (advisor)
This bachelor´s thesis deals with influence of crystallization additives to waterproof concrete. In the theoretical part is detailed analysis individual components in concrete production, improving waterproofing properties and finally functions and properties of crystallization materials. In the practical part I deal with influence of selected crystallization additives on properties of fresh and hardened concrete.
|
|
|
Experimental testing of hydroinsulating injection screens efficiency in dependance on properties of building materials
Červenka, Martin ; Černý, Vít (referee) ; Drochytka, Rostislav (advisor)
The most of the buildings are almost always faced with moisture in our climate. In the past, the humidity was reduced and conducted only by mechanical methods. Over time, chemical wet masonry method also known as chemical infusion curtain was invented and introduced into practice. This method involves the creation of boreholes at a selected height of humid masonry. These boreholes are impregnated with special solutions. These solutions in humid masonry fill pores in the field of boreholes and thanks to this subsequence the monolithic waterproofing curtain is created. The objective of this work is to determine the methodology for verifying effectiveness of various types of waterproofing injection curtains depending on the properties of the various types of building materials.
|
|
|
Office Block in Blansko
Zouhar, Martin ; Vlach, František (referee) ; Kolář, Radim (advisor)
The solution of the diploma thesis is the office block in Blansko. Building is suggested for using as insurance company. This building is located in a particular territory which had precisely limited the possibilities of the construction. There are three aboveground floors. The building is designed like reinforced concrete frame with complete masonry type THERM. The building is built on drilled piles that are connected fundamental grate. The facade is made as ceramic aired facade. The building has a flat roof with classical succession layer and is stabilized by gravel. The building is designed for fifty people.
|
|
|
Family house
Pánek, Martin ; Klimeš,, Vladimír (referee) ; Klimešová, Jarmila (advisor)
The main concern of this thesis is to design three storey family house. The house is divided into the main living area to the garage and basement areas and a part of an establishment. There is 2 floors in the house and there is partially a basement. The house has a flat roof.
|
guest ::
