|
|
Grate Boiler for Biomass Combustion
Szabó, Gergely ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
|
|
|
Digestate Grate Boiler
Krejčiřík, Jiří ; Milčák, Pavel (referee) ; Lisý, Martin (advisor)
This master thesis deals with the properties of digestate in combustion, design of construction solution of digestate boiler and experimental verification of boiler parameters. The first chapter deals with the properties of digestate as a fuel. It is followed by a chapter dealing with the existing measured results on a similar boiler. This is followed by a stoichiometric calculation of the digestate boiler. The next chapter is devoted to combustion chamber models. This chapter is followed by a chapter with experimental verification of chamber models and combustion process tuning. The last chapter contains design of construction and operational measures.
|
|
|
Grate Boiler for Wood Chips Combustion
Kozák, Tomáš ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The thesis is dedicated to the design of the steam boiler which burns wood chips, with a natural circulation of the water. It is a grate boiler, which produces 20 t/h of the steam. The output parameters of the steam are 420 °C and 5 MPa. The feedwater temperature is 125 ° C .The thesis gradually deals with stoichiometric calculations and determines the efficiency of the boiler. Then it describes the design of the fireplace and thermal calculations of each heat transfer surfaces. The appendix includes drawings of the boiler.
|
|
|
RDF Grate Biomass Boiler
Kudýn, David ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The master’s thesis deals with the design of a grate boiler with natural circulation for the combustion of refuse-derived fuels with the required heat output of 5 MW. Stochiometric calculations are executed at the introduction of the thesis, furthermore, the efficiency of the boiler is set down by an indirect method. Afterwards, the dimensions of the boiler are designed, with individual heat-exchanging surfaces. The last part of the thesis is dedicated to verifications of heat balance, the check of chlorine corrosion and setting down pressure losses for working medium and also for flue gas. The scheme of the boiler is attached in the appendix.
|
|
|
Steam Grate Biomass Boiler
Suchánková, Lenka ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The master's thesis describes the design of the steam boiler, which burns biomass with heat output of 6 MW. The required parameters of the steam are a temperature of 300 °C and a pressure of 2,5 MPa. The thesis is gradually devoted to stoichiometric calculations through heat losses and boiler efficiency, to the design of the combustion chambre, heat exchangers and pressure losses. Part of the thesis is drawing documentation of the boiler.
|
|
|
RDF Grate Biomass Boiler
Malíková, Veronika ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The diploma thesis deals with the design of a grate boiler for the combustion of a mixture of RDF and wood chips with the specified output and parameters of superheated steam. The introduction consists of stoichiometric calculations and determination of the thermal efficiency of the boiler. The thesis is devoted to determining the dimensions of the boiler, heat transfer calculations, determining pressure losses, checking the heat balance and chlorine corrosion.
|
|
|
Grate Biomass Boiler
Vrána, Jakub ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
This master thesis deals with design of grate biomass boiler with 50 t/h power. A fuel of the boiler is a mixture of contaminated biomass and woodchips. The boiler produces steam with parameters of 4,2 MPa and 420 °C. Stochiometric and thermal calculations are based on given fuel composition and output steam parameters. Heat exchangers are designated in accordance with the calculations. General drawing of the boiler is attached to this document. Anti-corrosion measures are considered, due to chlorine content in biomass. Hydraulic and aerodynamic losses and dew point of the flue gas is calculated in the end.
|
|
|
Grate Biomass Boiler
Dražka, Ondřej ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The aim of the thesis is a design of a grate steam boiler with capacity of 35 t/h and output steam parameters with temperature 430 °C and pressure 4,1 MPa. The first part of the thesis deals with stoichiometric calculations and boiler efficiency. The theses mainly focuses on the heat transfer calculation and the geometric design of individual heat transfer surfaces. The specifics of fuel are taken into consideration. The drawing of the basic boiler scheme is a part of the thesis.
|
|
|
Digestate Grate Boiler
Krejčiřík, Jiří ; Milčák, Pavel (referee) ; Lisý, Martin (advisor)
This master thesis deals with the properties of digestate in combustion, design of construction solution of digestate boiler and experimental verification of boiler parameters. The first chapter deals with the properties of digestate as a fuel. It is followed by a chapter dealing with the existing measured results on a similar boiler. This is followed by a stoichiometric calculation of the digestate boiler. The next chapter is devoted to combustion chamber models. This chapter is followed by a chapter with experimental verification of chamber models and combustion process tuning. The last chapter contains design of construction and operational measures.
|
|
|
Grate RDF Boiler
Lachman, Jakub ; Šilhavý, Karel (referee) ; Lisý, Martin (advisor)
The master’s thesis deals with the design of a boiler for RDF combustion, based on the required power output and superheated steam parameters. The first part of the thesis focuses on combustion calculations. Boiler efficiency is also calculated in this chapter, using the heat balance efficiency method. The main part of the thesis consists of dimensional design and heat transfer calculations. The precision of the calculations is checked at the end of the thesis along with the chlorine corrosion, which is considered because of the higher amount of chlorine in the fuel. The thesis comes with a basic schematic of the designed boiler.
|
guest ::
