|
|
Usage of foam bitumen technology
Machel, Ondřej ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
The diploma thesis deals with the production of warm mix asphalts, using the foam bitumen technology. The thesis is divided into theoretical and practical part. The theoretical part is focused on the basic division of roadway constructions, particularly on warm mix asphalts. The aim of the practical part was to find out whether the produced asphalt mixture retains its functional properties when the operating temperature is reduced. For this purpose, two asphalt mixtures of the ACO 11+ type at operating temperature of 150 °C and reduced operating temperature of 130 °C were made. Functional tests and empirical and functional tests were carried out on the produced asphalt mixtures and the extracted bitumen binders respectively. In the conclusion of the thesis, the results of the tests are mutually compared.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
|
|
Asphalt concrete with reclaimed material - design
Kučerová, Marcela ; Koudelka, Tomáš (referee) ; Varaus, Michal (advisor)
Bachelor thesis is focused on the design and testing of asphalt mix type asphalt concrete containing R-material. The theoretical part is dedicated to the RAP in asphalt mixtures produced by hot, in particular the specifics during design and manufacture of asphalt mixture. Next there is introduced further information relating to the functional characteristics of asphalt mixtures and the influence of R-material on them. The practical part describes the designs and testings on mixtures ACO 11+ and 11+ 50% RAP. In order to compare the proposed mixtures were carried out tests of low thermal attributes according to ČSN EN 12697-46 and cracking using uniaxial tensile test according to ČSN EN 12697-46.
|
|
|
Functional tests on mixtures of the test section with asphalt concrete and high amount of RAP
Kučerová, Marcela ; Zajíček, Jan (referee) ; Varaus, Michal (advisor)
The diploma thesis is focused on the testing of asphalt mixtures of asphalt concrete containing reclaimed asphalt and laying of the test section. The theoretical part deals with the use of reclaimed asphalt in hot asphalt mixtures, namely the specifics of rejuvenating agents, aging and asphalt mixture. Further more information on the functional properties of asphalt mixtures and the influence of reclaimed asphalt on them is given. The practical part describes testing of mixtures of ACO 11+ and ACO 11+ with 50% reclaimed asphalt and tests on asphalt binders. In order to compare the proposed mixtures, the low thermal properties of ČSN EN 12697-46 and the stiffness modules according to ČSN EN 12697-26. In the last part of the diploma thesis the results of the measured values were compared with each other in order to determine of asfphalt recovery. From the overall test results, it can be seen that the effect of the rejuvenating agent was positive. However, the desired degree of rejuvenation has not been achieved after production.
|
|
|
Swedish and US AR mixture design comparison
Puda, Adam ; Frýbort, David (referee) ; Kudrna, Jan (advisor)
This master's theseis deals with comparison of two design concepts for producting asphalt mixture with CRmB. These design concepts are from Sweden and USA. The theoretical part sets parameters for design of asphalt mixture and chracteristic tests. In the practical part test speciements of design asphatl mixture undergo performace tests that simulate climate and traffic load. Results are compared to mathematical model used in program LayEps.
|
|
|
Usage of foam bitumen technology
Machel, Ondřej ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
The diploma thesis deals with the production of warm mix asphalts, using the foam bitumen technology. The thesis is divided into theoretical and practical part. The theoretical part is focused on the basic division of roadway constructions, particularly on warm mix asphalts. The aim of the practical part was to find out whether the produced asphalt mixture retains its functional properties when the operating temperature is reduced. For this purpose, two asphalt mixtures of the ACO 11+ type at operating temperature of 150 °C and reduced operating temperature of 130 °C were made. Functional tests and empirical and functional tests were carried out on the produced asphalt mixtures and the extracted bitumen binders respectively. In the conclusion of the thesis, the results of the tests are mutually compared.
|
|
|
Functional tests on mixtures of the test section with asphalt concrete and high amount of RAP
Kučerová, Marcela ; Zajíček, Jan (referee) ; Varaus, Michal (advisor)
The diploma thesis is focused on the testing of asphalt mixtures of asphalt concrete containing reclaimed asphalt and laying of the test section. The theoretical part deals with the use of reclaimed asphalt in hot asphalt mixtures, namely the specifics of rejuvenating agents, aging and asphalt mixture. Further more information on the functional properties of asphalt mixtures and the influence of reclaimed asphalt on them is given. The practical part describes testing of mixtures of ACO 11+ and ACO 11+ with 50% reclaimed asphalt and tests on asphalt binders. In order to compare the proposed mixtures, the low thermal properties of ČSN EN 12697-46 and the stiffness modules according to ČSN EN 12697-26. In the last part of the diploma thesis the results of the measured values were compared with each other in order to determine of asfphalt recovery. From the overall test results, it can be seen that the effect of the rejuvenating agent was positive. However, the desired degree of rejuvenation has not been achieved after production.
|
|
|
Asphalt concrete with reclaimed material - design
Kučerová, Marcela ; Koudelka, Tomáš (referee) ; Varaus, Michal (advisor)
Bachelor thesis is focused on the design and testing of asphalt mix type asphalt concrete containing R-material. The theoretical part is dedicated to the RAP in asphalt mixtures produced by hot, in particular the specifics during design and manufacture of asphalt mixture. Next there is introduced further information relating to the functional characteristics of asphalt mixtures and the influence of R-material on them. The practical part describes the designs and testings on mixtures ACO 11+ and 11+ 50% RAP. In order to compare the proposed mixtures were carried out tests of low thermal attributes according to ČSN EN 12697-46 and cracking using uniaxial tensile test according to ČSN EN 12697-46.
|
|
|
Swedish and US AR mixture design comparison
Puda, Adam ; Frýbort, David (referee) ; Kudrna, Jan (advisor)
This master's theseis deals with comparison of two design concepts for producting asphalt mixture with CRmB. These design concepts are from Sweden and USA. The theoretical part sets parameters for design of asphalt mixture and chracteristic tests. In the practical part test speciements of design asphatl mixture undergo performace tests that simulate climate and traffic load. Results are compared to mathematical model used in program LayEps.
|
|
|
Use of special binders for recycling of asphalt mixtures at mixing plants
Pěch, Pavel ; Špaček, Petr (referee) ; Varaus, Michal (advisor)
The thesis deals with the matter of usage of special asphalt binders for production of asphalt mixtures containing recycled materials in asphalt plant. For comparison analysis of characteristics of special binder used in roads is necessary to compose different mixtures of asphalt – one with binder containing R-materials, and another benchmark mixture with binder used in common mixtures without recycled materials. Investigation of features of mixtures with different binders is carried out by selected performance tests of asphalt mixtures. Evaluation and comparison of the results is described in the final section of the thesis.
|
guest ::
