|
|
Modelling of closed space acousticsby the beam method
Ryšavý, Marek ; Orlovský, Kristián (referee) ; Trzos, Michal (advisor)
The bachelor thesis describes the modeling of room acoustics using the ray tracing method. The first chapter deals with a general description of the basic properties of acoustic environment (wave acoustics, statistical acoustics and geometric acoustics). Then are described methods of calculating geometrical acoustics (image-source method, ray-tracing method and beam-tracing method). In the second chapter of this work is described in detail ray tracing methods and algorithm for calculate room acoustic using this method.
|
|
|
Time Varying Filters for ECG Signals
Peterek, Jan ; Vítek, Martin (referee) ; Kozumplík, Jiří (advisor)
The aim of this master’s thesis is to create a multiband stop derived from Lynn filters for suppressing mains hum and baseline variation (drift). The first part of the thesis is focused on brief theoretical introduction to the distortion types affecting ECG signal and twelve lead connection. The following practical part describes free realizations of ECG filter and ECG signal filtration. The filter has been tested both on distorted and on non-distorted signal. Finally filters’ error rate was computed from CSE database signals.
|
|
|
Transport of Electric Charge in Tantalum Capacitor
Pelčák, Jaromír ; Koktavý, Bohumil (referee) ; Hájek, Karel (referee) ; Grmela, Lubomír (advisor)
The task of the thesis was studding of tantalum capacitors with solid electrolytes properties. Ta – Ta2O5 – MnO2 capacitor by its construction represents MIS structure, where tantalum anode has metal conductivity and MnO2 cathode is semiconductor. Isolation layer consists of tantalum pentoxide Ta2O5 with relative permitivity r = 27. Dielectric thickness is typically in range from 30 to 150nm. The capacitor charge is not only stored and accumulated on electrodes but also in localised states (oxide vacancies) in isolation layer. The capacitor connected in normal mode represents MIS structure polarized in reveres direction when the applied voltage higher potential barrier between semiconductor - MnO2 cathode and isolation of Ta2O5. The transport of charge carriers via isolation layer is determined by Poole-Frenkel mechanisms and tunnelling. Poole-Frenkel mechanism of charge transport is dominant in low intensity of electric field. Tunnelling determines current at higher electric field intensity. During low intensity of electric field ohmic component is also presented which is determined by volume of resistance of impurities in isolation layer due to donor states of oxygen vacancies. Based on the modelling of measured VA characteristics is possible to estimate determine dielectric thickness of Ta2O5 and determine share of Poole-Frenkelov and tunnel current and charge transportation. The thesis is described charge transport and charge concentration on tantalum capacitor in low frequency area and analysis of capacitor behaviour at frequency band. The first impulse for the thesis was an effort to create equivalent circuit diagram of tantalum capacitor in respect of its physical and electrical behaviour. There is an opportunity to study and determine electric charge transport and its accumulation based on the equivalent circuit diagram structure. There is also a chance to define and trace potential barriers and charge distribution in the capacitor structure based on an measurement and carried out experiments. This methodology and analysis consists of electrical characteristic determination to create physical model of the capacitor describing it function, properties and behaviour.
|
|
|
Modelling of closed space acousticsby the beam method
Ryšavý, Marek ; Orlovský, Kristián (referee) ; Trzos, Michal (advisor)
The bachelor thesis describes the modeling of room acoustics using the ray tracing method. The first chapter deals with a general description of the basic properties of acoustic environment (wave acoustics, statistical acoustics and geometric acoustics). Then are described methods of calculating geometrical acoustics (image-source method, ray-tracing method and beam-tracing method). In the second chapter of this work is described in detail ray tracing methods and algorithm for calculate room acoustic using this method.
|
|
|
Transport of Electric Charge in Tantalum Capacitor
Pelčák, Jaromír ; Koktavý, Bohumil (referee) ; Hájek, Karel (referee) ; Grmela, Lubomír (advisor)
The task of the thesis was studding of tantalum capacitors with solid electrolytes properties. Ta – Ta2O5 – MnO2 capacitor by its construction represents MIS structure, where tantalum anode has metal conductivity and MnO2 cathode is semiconductor. Isolation layer consists of tantalum pentoxide Ta2O5 with relative permitivity r = 27. Dielectric thickness is typically in range from 30 to 150nm. The capacitor charge is not only stored and accumulated on electrodes but also in localised states (oxide vacancies) in isolation layer. The capacitor connected in normal mode represents MIS structure polarized in reveres direction when the applied voltage higher potential barrier between semiconductor - MnO2 cathode and isolation of Ta2O5. The transport of charge carriers via isolation layer is determined by Poole-Frenkel mechanisms and tunnelling. Poole-Frenkel mechanism of charge transport is dominant in low intensity of electric field. Tunnelling determines current at higher electric field intensity. During low intensity of electric field ohmic component is also presented which is determined by volume of resistance of impurities in isolation layer due to donor states of oxygen vacancies. Based on the modelling of measured VA characteristics is possible to estimate determine dielectric thickness of Ta2O5 and determine share of Poole-Frenkelov and tunnel current and charge transportation. The thesis is described charge transport and charge concentration on tantalum capacitor in low frequency area and analysis of capacitor behaviour at frequency band. The first impulse for the thesis was an effort to create equivalent circuit diagram of tantalum capacitor in respect of its physical and electrical behaviour. There is an opportunity to study and determine electric charge transport and its accumulation based on the equivalent circuit diagram structure. There is also a chance to define and trace potential barriers and charge distribution in the capacitor structure based on an measurement and carried out experiments. This methodology and analysis consists of electrical characteristic determination to create physical model of the capacitor describing it function, properties and behaviour.
|
|
|
Time Varying Filters for ECG Signals
Peterek, Jan ; Vítek, Martin (referee) ; Kozumplík, Jiří (advisor)
The aim of this master’s thesis is to create a multiband stop derived from Lynn filters for suppressing mains hum and baseline variation (drift). The first part of the thesis is focused on brief theoretical introduction to the distortion types affecting ECG signal and twelve lead connection. The following practical part describes free realizations of ECG filter and ECG signal filtration. The filter has been tested both on distorted and on non-distorted signal. Finally filters’ error rate was computed from CSE database signals.
|
guest ::
