|
|
Apartment building
Kirová, Šárka ; Juráň, Vladimír (referee) ; Brukner, Bohuslav (advisor)
This bachelor's thesis deals with project documentation for the construction of an apartment house in Přelouč. The proposed building has four floors, no basement with 15 residential units, technical facilities and 14 individual garages. Vertical load-bearing and non-load-bearing structures are designed from Porotherm ceramic blocks. The perimeter masonry is contact insulated with facade expanded polystyrene and plastered with a thin layer of gray and white plaster. The fillings of the openings are plastic windows, including plastic entrance doors with a side skylight. Horizontal structures form monolithic reinforced concrete slabs reinforced unidirectionally or in both directions. The roof of the building consists of a flat roof with a vegetation layer. The apartment building is based on simple concrete foundation strips. The building is designed regarding the existing surrounding housing development. Part of the bachelor's thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
|
|
Apartment building
Kadlec, Michal ; Hnízdilová, Aneta Aya (referee) ; Daněk, Lukáš (advisor)
The content of this bachelor thesis is the design of the new apartment building in the town of Velké Meziříčí. It is an object with four above-ground floors and a abasement. The vertical supporting structures are designed from ceramic masonry, in the basement from monolithic reinforced concrete. The object will be covered with a pitched roof. The design documentation has been prepared according to the valid legal technical regulations.
|
|
|
Retirement Center
Mráčková, Kateřina ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The building is located in a remote part of the city of Dvur Králové nad Labem. It is a five-story new building of irregular shape with a flat roof and a SE-NW orientation. The building respects the existing building with its architectural design, balconies, receding floors in plan and vertical direction. A lower entrance is proposed in the northern part, where there are also two main entrances . The building has a partial basement. The vertical load-bearing structures made of lost formwork fittings, in the above-ground part of the Heluz ceramic block, are insulated with the ETICS contact system. The ceiling structure is designed as a reinforced concrete slab tensioned on both sides.
|
|
|
Living house
Bouček, Václav ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The aim of my master’s thesis is a project of a new apartment building at a level of the documentation for the structure realization. The thesis contains text, drawings and calculation part. The house is designed as a detached house. Residential house is situated in flat terrain. The building is full basement with four above-ground floor. The house has 16 housing units. The construction system is a combined brick. The structural system of the basement part is made up of permanent shuttering. The floors are of brick blocks HELUZ. In the middle of the building is constructed elevator. The ceiling structure is made of prefabricated prestressed panels Spiroll. The roof consists of single-layer flat roof. The thesis also includes thermal and technical expertise and the calculation of the foundation structure.
|
|
|
Apartment building - Brno
Zukal, Zdeněk ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of the diploma thesis is to elaborate the design documentation of an apartment house with restaurant. The building is designed in the village of Lipůvka, South-Moravian region, on plot No.: 544/1 and 545/1 – cadastral region Lipůvka. The bulit-up area is 443,3 m2. There are four floors. There is restaurant, one housing unit (for persons with reduced mobility) and utility room in first above-ground floor. Second, third and fourth above-ground floor is for housing. Each of these three floors has three apartments – two apartments 3+k, one apartment 3+1. Entrance to every apartment is from main staircase. The building is based on the foundation walls of concrete C20/25, all vertical walls are from Porotherm System. Celings are composed of ceramic-conrete beams POT, ceramic insertion Miako and concrete. The staircase is monolithic reinforced concrete. The building is without basement, roofed by a warm flat roof.
|
|
|
Multifunctional building
Reif, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The thesis is a project of a multifunctional building in Olomouc. That is the detached house with a rectangular ground plan, one underground floor and four above-ground floors. In the basement there are public parking garages, an technical room and an engine room of the ventilation. On the first floor there is a cafe and a copy center and the separate entrance for owners of the residential units. There are nine separate residential units on the second to the fourth floor. The house is based on the monolithic footings. The vertical supporting structure are formed by the basement walls in a combination with the monolithic reinforced concrete columns. Horizontal supporting structure is designed from the ceiling panels SPIROLL. The building is covered with flat single-roof construction with a drainage inward disposition.
|
|
|
Apartment Building in Poděbrady
Hlídková, Jana ; Král, Jakub (referee) ; Pěnčík, Jan (advisor)
This bachelor thesis deals with a draft of an apartment building in Poděbrady. A corner building site that is about 1 km north of the city centre was chosen for the apartment building. It is a four-storey building with a basement, it has an irregular shape, where some walls are not rectangular, and it is covered with a green roof. There are 16 apartments of various sizes on the above floors, and a utility room and a cellar can be found in the basement of the house. Considering the shape and layout solutions, the vertical and horizontal supporting structures are made of reinforced concrete. The perimeter walls are compositely insulated with basalt wool and plastered with a scratched façade plaster of creamy and grey-brown colour. Internal non-load-bearing walls are made up according to the Ytong system. The window openings are filled with wood-aluminium windows and the entrance doors are made of aluminium. The building is based on a reinforced concrete baseplate. The apartment building is designed with respect to the surrounding area. The bachelor thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.
|
|
|
Multifunctional house Strelice
Ben Hamad, Alexander ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
Diploma thesis is focused on design and elaboration of detailed design of polyfunctional building by Střelice, Brno-venkov the parcel number5804/4 and 5804/5. Proposition of the object respects both commune plan and current street buildings. It‘s not supposed to create stress with its shape and size, but complete actual buildings. It has four elevated floors, one basement and flat roof. Building has commercial space, mass garage and flats, it‘s determinate for study purpose.
|
|
|
Apartment building
Studený, Tomáš ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
The aim of the diploma thesis is to elaborate the design documentation of an apartment building.The building is situated in the town of Hustopeče, on the Generála Peřiny street. There are three floors and one underground floor in the house. The upper floors serve as residental units and the underground floor accommodates cellars and garages. The building is roofed by a warm flat roof.
|
|
|
Newly built Apartment house
Pícha, Libor ; Mizerová,, Lenka Smolková (referee) ; Smolka, Radim (advisor)
Diploma thesis „ Newly bulit apartment house“ deals with a proposal of block of flats in Veselí nad Lužnicí. The block of flats has got four storeys with no celler, and is in a rectangle shape. It is independently built house on a flat terrain. Bricked construction consists of ceramic constructuion blocks Heluz and reinforced concrete ceilings. The building is based on foundation belts and is roofed by a single-coat flat roof. There are 29 housing units designed in the building.
|
guest ::
