|
|
Design HRSG 0,8Nm3/s, 450°C
Hatiar, Peter ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.
|
|
|
Coke drying for calcium carbide production
Balko, Michal ; Ucekaj, Vladimír (referee) ; Jegla, Zdeněk (advisor)
The thesis deals with analysis of calcium carbide production process. The aim of the thesis is to identify and design savings resulting from the use of energy contained in flue gas, which is produced during the process. In the first part, history and applications of calcium carbide are presented. The thesis then contains mass and energy balance of calcium carbide production. Balance is related to 1 ton of the product. In conclusion, possibilities of flue gas use for coke drying are proposed. The thesis is based on the information from the calcium carbide factory located in Sundsvall, Sweden.
|
|
|
Desulphurization of pulverized coal bouler (dry bottom ash) in Teplarna Olomouc
Haluza, Jakub ; Lisý, Martin (referee) ; Skála, Zdeněk (advisor)
This master thesis deals with the feasibility studies desulphurization of powder granulation K3 boiler at Olomouc heating station. K3 boiler burns black energetic coal and after January 1st, 2016 will not meet new more strict emission limits. The theoretical part of the thesis charts usable desulphurization methods from which the semi-dry NID appears as the most appropriate one. In the practical part there is performed a stoichiometric calculation of the flue gas and the balance of raw materials and output products. The possibility of NID method usage is confirmed here. Next the annual operating cost of the desulfurization process is calculated and some NID systems already installed references are presented.
|
|
|
Desulphurisation of flue gas from pulverzided coal boiler,Tp Olomouc
Kozumplík, Ondřej ; Lisý, Martin (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to design a desulphurisation device for the pulverized coal boiler K3 in heating plant Olomouc. In this boiler, coal with sulphur content is burnt. Emissions SOx from the boiler output are much higher than the emission limits for SOx, which comes into force 1.1.2016. Therefore it is necessary to build a desulphurisation device, which will cause a significant reduction of SOx emissions and compliance with the emission limits. The thesis consists of two parts - theoretical and practical. The theoretical part states SO2 emission limits and describes various methods for flue gas desulphurisation. In the practical part I chose a semi-dry desulphurisation method with fluid reactor. It determines a stoichiometric amount of combustion air and determines the boiler efficiency. For the required parametres is given a calculation of desulphurisation, the design of some parts of the device and design arrangement.
|
|
| |
|
|
Desulphurisation of flue gas fuidized bed boiler.
Miklík, Tomáš ; Slezák, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to design a desulphurization device for the fluid boiler. In the fluid boiler, fuel with extremely high sulphur content is burnt and the combustion products are not desulphurized to the required level, therefore it is necessary to build a desulphurization device. The thesis consists of two parts – theoretical and practical. In the theoretical part I stated the emission limits of sulphur dioxide, elaborated possible desulphurization methods and described the sorbets suitable for desulphurization. In the practical part I chose a dry desulphurization method with fluid reactor, to which a dry sorbent on the basis of lime hydrate is dosed. For the required parameters, I designed the whole desulphurization equipment including cloth filters, all necessary silos and major components. It is a design proposal with a layout and a spatial model.
|
|
|
Heat exchanger design
Loukota, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with design of tube heat exchanger for preheat the return water to the boiler. Thesis contains description, distribution and requirements of the tube heat exchangers, stoichiometric calculation, geometrical dimensions design, pressure loss and thermal performance calculation. Thesis also includes drawings of the designed exchanger.
|
|
| |
|
|
Purification of flue-gas desulfurization
Křesťan, Jan ; Špiláček, Michal (referee) ; Hrnčířová, Michaela (advisor)
The aim of this thesis is theoretical elaboration of flue-gas desulfurization and emission limits of sulphur dioxide. Thesis is divided into three parts. First part is about content of sulphur in fuel, formation of sulphur oxides and their influence on human health and environment. Second part is dedicated to sources of sulphur dioxide, present emission situation in the Czech Republic and emission limits of sulphur dioxide. The third part describes methods how to reduce emissions of sulphur dioxide, especially methods of flue-gas desulfurization. The thesis is based on technical texts, Czech laws about air pollution and data from the Czech hydrometeorological institute.
|
|
| |
guest ::
