|
|
Phase Changes on Heat Exchanger Surfaces with Hollow Fibers
Kůdelová, Tereza ; Horák, Aleš (referee) ; Dohnal, Mirko (referee) ; Raudenský, Miroslav (advisor)
The thesis focuses on the polymer hollow fibres heat exchangers. The main object of the research is the formation and process of condensation on the outer surface of fibres and the effect of phase change on the heat transfer. The study deals with the influence of the geometry of the heat exchnager on the heat transfer and the condensation process. Fatigue tests of polymeric hollow fibres exchangers are also part of the work. The work provides an overview of the possible use of such heat exchangers in industrial applications associated with condensation.
|
|
|
Study of passive stabilisation of building materials temperature
Šebek, Jan ; Pavlík,, Zbyšek (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented master’s thesis was study of passive stabilization of building materials temperature. The main goal of this thesis was measuring and characterization of the thermal properties of building materials, which are used to PCM technology. PCM technology is based on utilization of latent heat of phase change. At the beginning of this thesis it was needed to define physical principle of phase change, then the most usable PCM chemicals (e.g. paraffin, Glauber’s salt, hexahydrate calcium chloride) and their basic physical properties (especially thermo-physical), background research of building materials with PCM and also the methods of thermo-physical properties measurement. It was also needed to characterize measured building materials and define theirs thermal parameters; because the values of thermal parameters of measured samples were compared to these values. In the experimental part of my thesis are measurements of material thermal analysis, which are methods, where the properties of materials are studied as they change with temperature. I had used to differential scanning calorimetry, transient pulse method and other methods, which are usable for thermo-physical properties measuring and characterization. I have been much interested in properties of measured material, which were specific heat capacity, temperature diffusivity, heat conductivity and phase change temperature (the melting point of PCM). At the end of my thesis the findings of all methods were finally summarized, compared and commented.
|
|
|
Phase Changes on Heat Exchanger Surfaces with Hollow Fibers
Kůdelová, Tereza ; Horák, Aleš (referee) ; Dohnal, Mirko (referee) ; Raudenský, Miroslav (advisor)
The thesis focuses on the polymer hollow fibres heat exchangers. The main object of the research is the formation and process of condensation on the outer surface of fibres and the effect of phase change on the heat transfer. The study deals with the influence of the geometry of the heat exchnager on the heat transfer and the condensation process. Fatigue tests of polymeric hollow fibres exchangers are also part of the work. The work provides an overview of the possible use of such heat exchangers in industrial applications associated with condensation.
|
|
|
Study of passive stabilisation of building materials temperature
Šebek, Jan ; Pavlík,, Zbyšek (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented master’s thesis was study of passive stabilization of building materials temperature. The main goal of this thesis was measuring and characterization of the thermal properties of building materials, which are used to PCM technology. PCM technology is based on utilization of latent heat of phase change. At the beginning of this thesis it was needed to define physical principle of phase change, then the most usable PCM chemicals (e.g. paraffin, Glauber’s salt, hexahydrate calcium chloride) and their basic physical properties (especially thermo-physical), background research of building materials with PCM and also the methods of thermo-physical properties measurement. It was also needed to characterize measured building materials and define theirs thermal parameters; because the values of thermal parameters of measured samples were compared to these values. In the experimental part of my thesis are measurements of material thermal analysis, which are methods, where the properties of materials are studied as they change with temperature. I had used to differential scanning calorimetry, transient pulse method and other methods, which are usable for thermo-physical properties measuring and characterization. I have been much interested in properties of measured material, which were specific heat capacity, temperature diffusivity, heat conductivity and phase change temperature (the melting point of PCM). At the end of my thesis the findings of all methods were finally summarized, compared and commented.
|
guest ::
