|
|
Design and implementation of 3D printer with network printing support
Špringer, Radek ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
The goal of this thesis is to design a 3D printer type delta. To describe 3D printing technologies used by this printer, basic printer features and commercially available material used at the print and its comparison. To define all hardware components, which are necessary for construction of the 3D printer type delta. To create a proposal and construct an expansion board to which all hardware components of the printer will be connected. To optimize the print space heating and cooling of the printout. To extend the 3D printer with a Web server, which will ensure the network printing possibility.
|
|
|
Firmware for Testing Platform JaQT
Veverka, Jiří ; Drahanský, Martin (referee) ; Malaník, Petr (advisor)
This bachelor thesis is about the JaQT (Just a Quick Test) platform which was developed for simple and fast software-hardware testing. The theoretical part of this thesis is describing used MCU, control board, peripherals and interfaces. The USB protocol and its CDC ACM class which is used for interfacing the device to enable communication with the board is described in this part as well. In the practical part is described how the JaQT was implemented, debugged, tested, used and evaluated.
|
|
|
Solution proposal for inteligent house using wireless sensors
Macháček, Jan ; Strašil, Ivo (referee) ; Krajsa, Ondřej (advisor)
The purpose of the bachelor's thesis was design of system for management of an Intelligent House based on a platform Raspberry Pi. The paper contains design of expansion panel from GPIO port of Raspberry Pi. The expansion panel includes many controllable peripheries which can be accessed by a control panel or a web interface. The complex system can manage various electrical devices and interact based on given conditions.
|
|
|
Automated hardware testing equipment
Macháček, Jan ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
This thesis is focused on the design of system for automated testing of hardware on Beagle Bone Black platform. The purpose of this thesis is to develop a complex device which will be able to test the functionality of general electronic devices before completion. Use the external measuring devices and design hardware to control them.
|
|
|
Firmware for Testing Platform JaQT
Veverka, Jiří ; Drahanský, Martin (referee) ; Malaník, Petr (advisor)
This bachelor thesis is about the JaQT (Just a Quick Test) platform which was developed for simple and fast software-hardware testing. The theoretical part of this thesis is describing used MCU, control board, peripherals and interfaces. The USB protocol and its CDC ACM class which is used for interfacing the device to enable communication with the board is described in this part as well. In the practical part is described how the JaQT was implemented, debugged, tested, used and evaluated.
|
|
|
Solution proposal for inteligent house using wireless sensors
Macháček, Jan ; Strašil, Ivo (referee) ; Krajsa, Ondřej (advisor)
The purpose of the bachelor's thesis was design of system for management of an Intelligent House based on a platform Raspberry Pi. The paper contains design of expansion panel from GPIO port of Raspberry Pi. The expansion panel includes many controllable peripheries which can be accessed by a control panel or a web interface. The complex system can manage various electrical devices and interact based on given conditions.
|
|
|
Design and implementation of 3D printer with network printing support
Špringer, Radek ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
The goal of this thesis is to design a 3D printer type delta. To describe 3D printing technologies used by this printer, basic printer features and commercially available material used at the print and its comparison. To define all hardware components, which are necessary for construction of the 3D printer type delta. To create a proposal and construct an expansion board to which all hardware components of the printer will be connected. To optimize the print space heating and cooling of the printout. To extend the 3D printer with a Web server, which will ensure the network printing possibility.
|
|
|
Automated hardware testing equipment
Macháček, Jan ; Hošek, Jiří (referee) ; Krajsa, Ondřej (advisor)
This thesis is focused on the design of system for automated testing of hardware on Beagle Bone Black platform. The purpose of this thesis is to develop a complex device which will be able to test the functionality of general electronic devices before completion. Use the external measuring devices and design hardware to control them.
|
guest ::
