|
|
Modification of HVOF and cold spray deposited coatings via electron beam technology
Vacek, Petr ; Šiška, Filip (referee) ; Čížek, Jan (advisor)
The aim of this thesis was to modify microstructure and coating-substrate interface of CoNiCrAlY coatings deposited by HVOF and cold spray on Inconel 718 substrates. Electron beam remelting and annealing in a protective atmosphere were used to modify the coatings. Microstructure, chemical and phase composition were analyzed. The effect of beam current, transversal velocity and beam defocus on remelted depth was evaluated. As-sprayed microstructure and chemical composition of coatings were analyzed and compared with remelted samples. The effect of annealing of the as-sprayed and remelted samples was evaluated. Remelted layers exhibited dendritic structure. Chemical composition changed only after remelting of interface and part of a substrate. When only the coating was remelted, chemical composition remained the same. Phases coarsened after the annealing. Chemical composition changed after annealing due to the diffusion.
|
|
|
Influence of the electron beam trajectory on the surface properties of steel 42CrMo4
Mikuš, Tomáš ; Kouřil, Miloslav (referee) ; Foret, Rudolf (advisor)
The thesis deals with surface quenching of steel 42CrMo4 by electron beam. Influence of technologic parameters and beam deflection on properties and structure of prepared layers is studied. Electron beam surface quenching was applicated with and without melting of the surface. Structures of layers made by electron beam quenching were compared with structures made by laser and electromagnetic induction. Structures and phases were analysed by optical microscopy, SEM and roentgen diffraction. Hardness was measured on hardened layers.
|
|
|
Unconventional machining processes
Exnerová, Jitka ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This thesis deals with the methods of the unconventional machining. The first part outlines the history of the machining methods, their characteristic and use follows. The second part aims at the method of the water jet, its technology, safety use, its advantages and disadvantages. Subsequently the thesis presents selected companies dealing with water jet cutting technology. At the end the thesis presents the environmental impact of the water jet cutting.
|
|
|
Determination of properties of as-sprayed and EB-deposited coatings prepared by thermal spray technologies using scratch test and nano-indentation methods
Cének, Lukáš ; Tkachenko, Serhii (referee) ; Čížek, Jan (advisor)
Properties of samples and their coatings may be affected by the electron beam. This paper deals with the analysis of the microstructure, phase and chemical composition and the determination of mechanical characteristics of inconel steel substrate and CoNiCrAlY coatings deposited via different types of thermal spraying (HVOF, cold spray), in combination with modifications by the electron beam technology. During the study it was found that the deposition did not change the chemical composition. Further it was found that the interaction of the electron beam with the material did not change the chemical composition, but there is a change in the structure and a reduction of porosity and surface roughness, resulting in a change of mechanical properties such as decreasing hardness or increase of the modulus of elasticity.
|
|
|
Modification of coating-substrate interface character of thermally sprayed coatings using electron beam technology
Mareš, Jiří ; Moravčík, Igor (referee) ; Čížek, Jan (advisor)
Tato práce je zaměřena na modifikaci charakteru rozhraní substrát-nástřik NiCrAlY povlaků nanesených pomocí technologie vodou stabilizované plazmy na substráty z oceli S235JRC+C. Přetavení žárové vrstvy elektronovým paprskem bylo zvoleno jako technologie pro modifikaci a dvě různé modifikace byly zkoumány. V práci byl proveden pokus o stanovení vlivu modifikací na adhezní vlastnosti nástřiku. Dále jsou v práci prezentovány analýzy mikrostruktury, fázového a chemického složení a mikrotvrdosti ve stavu před a po modifikaci. Během studie bylo zjištěno, že dochází ke změnám fázového složení jak během depozice, tak během modifikace elektronovým paprskem. Modifikace elektronovým paprskem způsobila roztavení oxidů původní mikrostruktury nástřiku, které následně rekrystalizovaly na povrchu modifikované vrstvy. Dalším získaným poznatkem bylo, že dochází ke snížení mikrotvrdosti po modifikaci, což bylo způsobeno odstraněním oxidů z mikrostruktury a promícháním materiálu substrátu a původního nástřiku. Adheze nástřiků v as sprayed stavu byla kvantifikována. V případě nástřiků modifikovaných elektronovým paprskem přesná kvantifikace nebyla možná, z důvodu předčasného porušení na rozhraní nástřik-adhezivní pojivo během adhezních testů.
|
|
|
Interaction of low-energy electrons with graphene field effect transistors
Vysocký, Filip ; Kunc, Jan (referee) ; Čechal, Jan (advisor)
This diploma thesis is focused on fabrication of graphene field-effect transistors, characterisation of their transport properties and investigation of low-energy electron beam influence on the devices' properties under UHV conditions. The theoretical part of this work describes graphene fabrication methods, options of graphene transfer onto the substrates for graphene field-effect transistor manufacture. Furthermore, model of graphene doping via electrostatic interaction or photon, resp. electron beam exposition is explained. The experimental part of this work consist of manufacture of the graphene field-effect transistor in order to examine the change of its transport properties induced by doping of the graphene via low-energy electron beam exposition.
|
|
|
Modification of SPS quasicrystalline compacts via electron beam treatment
Poczklán, Ladislav ; Lukáč,, František (referee) ; Čížek, Jan (advisor)
The quasicrystals are characterized by unusual rotational symmetries that are not observed in the crystalline materials, which is the cause of their interesting material properties. Because of that a particular attention was paid to quasicrystalline structures in the literature research. The research also contains a description of electron beam technology, spark plasma sintering method and introduction to the problematics of wear. As the default materials for the experimental part were selected Titanium Grade 2 powder and Cristome A5 powder which was partially composed of quasicrystalline phase. The first series of samples was sintered only from powder Cristome A5. The second series was sintered from the mixture of 80 % Titanium Grade 2 powder and 20 % Cristome A5 powder. For the compaction of samples spark plasma sintering technology was selected. Samples were then systematically modified by electron beam and subjected to pin on disc tests. Samples modified at 750 °C had the best wear resistance. Samples modified at 1150 °C contained increased amount of quasicrystalline phase.
|
|
|
Effect of electron beam remeltin on binary mixtures deposited by the cold spray method
Novotný, David ; Řehořek, Lukáš (referee) ; Čupera, Jan (advisor)
This bachelor’s thesis deals with the effect of an electron beam remelting on binary mixtures of Fe-Al and Ni-Al, which were deposited by Cold spray. The Research study is focused on the basic principles of function and usage of the electron beam technology and the Cold spray method. Furthermore, binary systems of Fe-Al and Ni-Al are, along with their binary diagrams, also described in this part. In the Experimental part, the samples were remelted by an electron beam and consequently, the changes in microstucture were examined using electron and optical microscope.
|
|
|
Detection and measurement of electron beam in TEM images
Polcer, Simon ; Vičar, Tomáš (referee) ; Chmelík, Jiří (advisor)
This diploma thesis deals with automatic detection and measurement of the electron beam in the images from a transmission electron microscope (TEM). The introduction provides a description of the construction and the main parts of the electron microscope. In the theoretical part, there are summarized modes of illumination from the fluorescent screen. Machine learning, specifically convolution neural network U-Net is used for automatic detection of the electron beam in the image. The measurement of the beam is based on ellipse approximation, which defines the size and dimension of the beam. Neural network learning requires an extensive database of images. For this purpose, the own augmentation approach is proposed, which applies a specific combination of geometric transformations for each mode of illumination. In the conclusion of this thesis, the results are evaluated and summarized. This proposed algorithm achieves 0.815 of the DICE coefficient, which describes an overlap between two sets. The thesis was designed in Python programming language.
|
|
|
Unconventional preparation technology of bulk material from Mg
Horálek, Matyáš ; Hasoňová, Michaela (referee) ; Březina, Matěj (advisor)
Topic of the bachelor's thesis is the procedure of preparation and processing of bulk magnesium powder by unconventional technologies. Bulk materials were evaluated from the point of porosity, microstructure and physically-mechanical properties in correlation with changes of parameters during preparation. Furthemore the influence of chosen processing parameters of electron beam was evaluated from structural properties and depth of the affected material. The outcome of this work is focused on study and optimalization of parameters during preparation and processing of bulk material.
|
guest ::
