|
|
Disposal of Biotic Pests by EMW Radiation
Sobotka, Jindřich ; Klečka,, Tomáš (referee) ; Myslín, Jiří (referee) ; Tomíček,, Oldřich (referee) ; Šuhajda, Karel (advisor)
The possibility of using high-frequency electromagnetic radiation in the construction sector is a common knowledge. Various experiments have been carried out to dry construction materials, or even to destroy biotic pests. However, the majority of these experiments have been executed in laboratory conditions. It means they have been carried out under exact limiting conditions, often very far off those conditions in real building practice. Therefore, this dissertation aims at exploring the possibility of utilizing microwave technology in drying and heating of construction materials, in disposing of biotic pests and sterilizing building materials under real conditions in building practice. The thesis will explain that microwaves are a term given to a part of electromagnetic radiation. Electromagnetic radiation is based on the principle that the radiated energy is absorbed by water molecules present in moist building material. In the mass of the irradiated material, the radiated energy is transformed into thermal energy, where a so-called “motion” of water molecules occurs with the energy then being transformed into kinetic energy. The microwave technology itself offers a very wide range of use, which can be easily achieved, thus making the technology available to use in the future. Part of the experiments and the necessary measurements, too, has been carried out on selected types of building materials in the premises of the Faculty of Civil Engineering of Brno University of Technology. They have been executed under conditions which most closely correspond to the conditions in real buildings. Part of the experiments and the necessary measurements were carried out on particular constructions, by the so-called in situ method. As stated in the conclusion of the dissertation, laboratory measurements and the in situ measurements differ considerably in some cases.
|
|
|
Assessing the impact of the closing of paint and lacquer surfaces on the durability of concrete products
Zubkova, Ekaterina ; Eger, Lukáš (referee) ; Hubáček, Adam (advisor)
This diploma thesis is focused on studying the influence of different types of surface treatments on vibropressed product. The main goal is to characterize surface treatments consisting of application of surface coatings that are hardened by infrared or ultraviolet radiation. Theoretical part gives specifications already known methods for surface finishing. Briefly describes selected types of prefabricated concrete parts and specificate the requirements for these products. It also describes used test methods. The experimental part was aimed at establishing the effectiveness of changing properties concrete products by adding coatings on their surface. This was achieved by testing the properties of concrete paving blocks with modified surfaces and testing of reference blocks that did not have any surface treatment followed by mutual comparison of the results.
|
|
|
Reduction of efflorescence in the geopolymer systems
Suchý, Rostislav ; Šoukal, František (referee) ; Kalina, Lukáš (advisor)
Alkali metal cations are weakly bound in the structure of alkali activated materials. This fact causes the formation of undesirable efflorescence in humid environment. In this work, the effect of fluoride additives, which significantly reduce the efflorescence, was investigated. The chemical mechanism of selected additive in the modified binder was studied based on XRD, SEM EDX and ICP OES analysis. Also the effect of the added fluorides on the mechanical properties of the final product was monitored.
|
|
|
Effect of the Composition of Alkali Activator on the Properties of Geopolymer Materials
Rinnová, Martina ; Bayer,, Patrik (referee) ; Rovnaník, Pavel (advisor)
The master thesis discusses the alkali-activation of aluminosilicate material (metakaolin), specifies the main components of geopolymer mixture, evaluates the influence of geopolymer mixture composition and the influence of other factors on final properties of geopolymer. Results of the mechanical properties and microstructure of the geopolymer pastes made out of metakaolin activated by various amounts (50–110 % by weight of metakaolin) of liquid water glass (with varying modulus from 0,5 to 3,0) or NaOH as well as KOH solution are presented in the experimental part.
|
|
|
Geopolymers: The influence of alkaline activator cations on efflorescence
Novotná, Martina ; Polonská, A. ; Šídlová, M. ; Perná, Ivana
This paper describes the effect of the type of cations in the alkaline activator on geopolymer properties and especially on the formation of efflorescence. The susceptibility to the formation of efflorescence is discussed according to the standard ČSN 72 1565-13. Cations in alkaline activators influence the mineralogical type of efflorescence: Li+ and Na+ cations form carbonates (Li2CO3 and Na2CO3, respectively), whereas K+ cations form sulphate (K2SO4). The mechanical properties, workability and pore structure of the geopolymer composites have been determined. Alkaline activators with sodium and potassium ions reach higher mechanical strength than those containing lithium cations. For lithium alkaline activators, there was a noticeable difference in the properties between the SiO2/Li2O ratios 1.8 and 2.6. Based on the properties of the mentioned geopolymer composites with various alkaline cations, it is possible to use lithium alkaline activators in geopolymer technology.
|
|
|
Disposal of Biotic Pests by EMW Radiation
Sobotka, Jindřich ; Klečka,, Tomáš (referee) ; Myslín, Jiří (referee) ; Tomíček,, Oldřich (referee) ; Šuhajda, Karel (advisor)
The possibility of using high-frequency electromagnetic radiation in the construction sector is a common knowledge. Various experiments have been carried out to dry construction materials, or even to destroy biotic pests. However, the majority of these experiments have been executed in laboratory conditions. It means they have been carried out under exact limiting conditions, often very far off those conditions in real building practice. Therefore, this dissertation aims at exploring the possibility of utilizing microwave technology in drying and heating of construction materials, in disposing of biotic pests and sterilizing building materials under real conditions in building practice. The thesis will explain that microwaves are a term given to a part of electromagnetic radiation. Electromagnetic radiation is based on the principle that the radiated energy is absorbed by water molecules present in moist building material. In the mass of the irradiated material, the radiated energy is transformed into thermal energy, where a so-called “motion” of water molecules occurs with the energy then being transformed into kinetic energy. The microwave technology itself offers a very wide range of use, which can be easily achieved, thus making the technology available to use in the future. Part of the experiments and the necessary measurements, too, has been carried out on selected types of building materials in the premises of the Faculty of Civil Engineering of Brno University of Technology. They have been executed under conditions which most closely correspond to the conditions in real buildings. Part of the experiments and the necessary measurements were carried out on particular constructions, by the so-called in situ method. As stated in the conclusion of the dissertation, laboratory measurements and the in situ measurements differ considerably in some cases.
|
|
|
Assessing the impact of the closing of paint and lacquer surfaces on the durability of concrete products
Zubkova, Ekaterina ; Eger, Lukáš (referee) ; Hubáček, Adam (advisor)
This diploma thesis is focused on studying the influence of different types of surface treatments on vibropressed product. The main goal is to characterize surface treatments consisting of application of surface coatings that are hardened by infrared or ultraviolet radiation. Theoretical part gives specifications already known methods for surface finishing. Briefly describes selected types of prefabricated concrete parts and specificate the requirements for these products. It also describes used test methods. The experimental part was aimed at establishing the effectiveness of changing properties concrete products by adding coatings on their surface. This was achieved by testing the properties of concrete paving blocks with modified surfaces and testing of reference blocks that did not have any surface treatment followed by mutual comparison of the results.
|
|
|
Effect of the Composition of Alkali Activator on the Properties of Geopolymer Materials
Rinnová, Martina ; Bayer,, Patrik (referee) ; Rovnaník, Pavel (advisor)
The master thesis discusses the alkali-activation of aluminosilicate material (metakaolin), specifies the main components of geopolymer mixture, evaluates the influence of geopolymer mixture composition and the influence of other factors on final properties of geopolymer. Results of the mechanical properties and microstructure of the geopolymer pastes made out of metakaolin activated by various amounts (50–110 % by weight of metakaolin) of liquid water glass (with varying modulus from 0,5 to 3,0) or NaOH as well as KOH solution are presented in the experimental part.
|
|
|
Reduction of efflorescence in the geopolymer systems
Suchý, Rostislav ; Šoukal, František (referee) ; Kalina, Lukáš (advisor)
Alkali metal cations are weakly bound in the structure of alkali activated materials. This fact causes the formation of undesirable efflorescence in humid environment. In this work, the effect of fluoride additives, which significantly reduce the efflorescence, was investigated. The chemical mechanism of selected additive in the modified binder was studied based on XRD, SEM EDX and ICP OES analysis. Also the effect of the added fluorides on the mechanical properties of the final product was monitored.
|
guest ::
