|
|
User influence on miniature antennas in mobile applications
Vehovský, Radek ; Polívka,, Milan (referee) ; Pokorný, Michal (advisor)
This master’s thesis deals with user influence on miniature antennas in mobile application. Electrically small antennas including fundamental performance properties and limitations are introduced in the theoretical section of this thesis. This section also deals with microstrip antennas and their common types. The accent is on PIFA antennas, their typical constructions and methods of miniaturization. In the practical section, dual-band PIFA antenna for operation at frequencies of systems GSM900 and GSM1800 is designed with the assistance of electromagnetic field simulator CST Microwave Studio. On this type of antenna, the user influence on impedance matching and radiation pattern in data mode (the user is typing message or browsing with the phone) is investigated. For this purpose the hand phantom, corresponding to author’s right hand, was made from agar based material. For typical position of human hand is designed matching network, which eliminate the user influence and ensure correct function of antenna.
|
|
|
Dualband Antenna for Global Navigation Satellite System
Mikulášek, Tomáš ; Lukeš, Zbyněk (referee) ; Láčík, Jaroslav (advisor)
This master’s thesis introduces to the reader with a modern antenna type the microstrip patch antennas. The most common types of microstrip antennas and their parameters and feeding methods are introduced in the theoretical section of this master’s thesis. This section deals with the circularly polarized microstrip antennas. Design of an active dual-band circularly polarized antenna for global navigation satellite application in the AWR Microwave Office is presented in the practical section. The proposed single-fed dual-band circularly polarized design is achieved using two stacked square microstrip patches. The antenna operates at the L1 + E1 and L5 + E5a frequency bands. Antenna preamplifier consists of a low-noise transistor and a dual-band band-pass filter. The thesis describes realization and measurement results of the dual-band antenna performance in the anechoic chamber. Measured results of the preamplifier performance are presented.
|
|
|
Dual-Band Helix Antenna for WiFi band
Šrajbr, Michal ; Tkadlec, Roman (referee) ; Pítra, Kamil (advisor)
This master’s thesis is focused on the properties and types of helical antennas. The helical antenna work in the different modes. These modes are described in this thesis. There are also discussed possibility for design a dual-band helical antennas. The main aim of this work is the selection of a suitable solution and design a dual-band helical antenna for the WiFi band working at resonance frequencies of 2,4 GHz and 5 GHz. The simulation of this antenna was performed in the program CST Microwave studio.
|
|
|
Antenna a LNA for multiband GNSS receiver
Ondráš, Michal ; Baran, Ondřej (referee) ; Záplata, Filip (advisor)
This project describesa microwave antenna for GNSS and low noise amplifier. Mikrostrip antenna is a modern type of antenna. This mikrostrip antenna is Dual – band antenna with circual polarization. The thesis describes how to make anantenna, what a circular polarization is, whata patch antenna is and what GNSS is. Low noise amplifier amplifies the antenna output signal.
|
|
|
Dual-band directional antenna for receiving DVB-T signal
Matyáš, Petr ; Šebesta, Jan (referee) ; Lukeš, Zbyněk (advisor)
The main goal of the masters project is to design a dual band antenna for receiving DVB-T signal in the area of the city of Brno. The antenna will be designed and detaily adjusted for receiving multiplex 1 and 3, exactly for frequencies of 538 MHz and 778 MHz. The designed antenna will be deeply tested in 4nec2 and CST Microwave Studio programs.
|
|
|
Dual band antenna with parallel resonant circuit
Vítek, Jiří ; Šebesta, Jiří (referee) ; Lukeš, Zbyněk (advisor)
Bachelor’s thesis deals with multiband wire antennas for VHF and UHF amateur bands and with a design of the antenna in program 4NEC, which uses a parallel resonant circuits to reach resonance at the given frequencies 145 MHz and 432 MHz. The proper function of the antenna is verified by simulation in CST Microwave Studio. This antenna is also realized after the successful simulation like a prototype and its parameters are measured
|
|
|
Antenna a LNA for multiband GNSS receiver
Ondráš, Michal ; Baran, Ondřej (referee) ; Záplata, Filip (advisor)
This project describesa microwave antenna for GNSS and low noise amplifier. Mikrostrip antenna is a modern type of antenna. This mikrostrip antenna is Dual – band antenna with circual polarization. The thesis describes how to make anantenna, what a circular polarization is, whata patch antenna is and what GNSS is. Low noise amplifier amplifies the antenna output signal.
|
|
|
Dual band antenna with parallel resonant circuit
Vítek, Jiří ; Šebesta, Jiří (referee) ; Lukeš, Zbyněk (advisor)
Bachelor’s thesis deals with multiband wire antennas for VHF and UHF amateur bands and with a design of the antenna in program 4NEC, which uses a parallel resonant circuits to reach resonance at the given frequencies 145 MHz and 432 MHz. The proper function of the antenna is verified by simulation in CST Microwave Studio. This antenna is also realized after the successful simulation like a prototype and its parameters are measured
|
|
|
User influence on miniature antennas in mobile applications
Vehovský, Radek ; Polívka,, Milan (referee) ; Pokorný, Michal (advisor)
This master’s thesis deals with user influence on miniature antennas in mobile application. Electrically small antennas including fundamental performance properties and limitations are introduced in the theoretical section of this thesis. This section also deals with microstrip antennas and their common types. The accent is on PIFA antennas, their typical constructions and methods of miniaturization. In the practical section, dual-band PIFA antenna for operation at frequencies of systems GSM900 and GSM1800 is designed with the assistance of electromagnetic field simulator CST Microwave Studio. On this type of antenna, the user influence on impedance matching and radiation pattern in data mode (the user is typing message or browsing with the phone) is investigated. For this purpose the hand phantom, corresponding to author’s right hand, was made from agar based material. For typical position of human hand is designed matching network, which eliminate the user influence and ensure correct function of antenna.
|
|
|
Dual-band directional antenna for receiving DVB-T signal
Matyáš, Petr ; Šebesta, Jan (referee) ; Lukeš, Zbyněk (advisor)
The main goal of the masters project is to design a dual band antenna for receiving DVB-T signal in the area of the city of Brno. The antenna will be designed and detaily adjusted for receiving multiplex 1 and 3, exactly for frequencies of 538 MHz and 778 MHz. The designed antenna will be deeply tested in 4nec2 and CST Microwave Studio programs.
|
guest ::
