|
|
Proposal of process control in production safety valve
Jaša, Aleš ; Prokop, Jaroslav (referee) ; Pernikář, Jiří (advisor)
The aim of this thesis is precise definition of control processes for components of Pressure Limit Valve 5 Generation (PLV5) which is produced by Bosch Diesel Ltd. in Jihlava. The objective was to define measurement methods which ensure identical results of measurement between co. Bosch Diesel Ltd. in Jihlava and suppliers of individual components. The results of this study are introduced into control drawings and described in individual conclusions of the thesis.
|
|
|
Comparison of flame and fusion laser cutting of material DC01
Krejčiřík, Marek ; Horník, Petr (referee) ; Mrňa, Libor (advisor)
This thesis is focused on the technology of laser cutting together with edge roughness for low carbon steel material DC01. The thesis is divided into theoretical and practical part. The theoretical part examines laser itself and contains a physical description of the laser beam with the laser construction, division according to the active environment or the occurrence of laser devices in today’s engineering industry. The last part of the theoretical research is aimed to the surface roughness, its parameters and the measuring technology. The practical part is focused on the comparison of the edge roughness of material DC01 after laser cutting with the usage of flame and fusion. The measured parameters of roughness were further compared with the norm ČSN EN ISO 9013.
|
|
|
The assessment of the capacity of bridge profiles on the Bobrava river
Bezděk, Josef ; Roubcová, Radka (referee) ; Milerski, Rudolf (advisor)
This diploma thesis “The Assessment of the Capacity of Bridge Profiles on the Bobrava River” focuses on making calculations of a system of bridges by using HEC-RAS PC software. This thesis assesses the capacity of bridges and applies knowledge of model research to design increase the capacity. A model of a stream on Bobrava River will be created. Furthermore, modifications of a river bed and bridge profiles will be realized for safe conversion Q100 by these constructions. Subsequently, a model of the modified stream n Bobrava River will be made. Lengthways profiles of water surface, table and graphic outputs from HEC-RAS PC software and modified designs will be output.
|
|
|
Advanced methods of surface topography evaluation
Toman, Ladislav ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This paper deals with the description of the surface texture measurement methods, describes the devices by which the surface texture can be recorded and describes the parameters that allow the surface texture to be quantified. The practical part deals with the evaluation and comparison of the parameters of metric threads M10 made by cutting and forming by analysis of their cross-sections, then the attention is focused on the analysis of pressure forces and torques which occur during the manufacture and in the last part of the thesis there is an economic evaluation of the cost of manufacturing one piece of cut thread.
|
|
|
Condensing technology and flue gas
Müller, Jan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.
|
|
|
Advanced methods of surface topography evaluation
Metelková, Jitka ; Prokop, Jaroslav (referee) ; Píška, Miroslav (advisor)
This paper provides an overview of contemporary methods for evaluation of the part surface, nowadays measurement devices and evaluated parameters. The main part of the paper is devoted to advanced methods of surface topography evaluations including the application of the new non-contact measurement technique Alicona G4. The experimental part deals mainly with a study of surface texture parameters of the machined aluminium alloy AlCu4MgSi when face turning. It concerns mostly a study of the tool feed rate influence (the uncoated insert GIPA-6.00-3.00, ISO 513 N05-N25, Iscar) on selected profile and surface parameters, including comparison of measurement results achieved by the contact (Form Talysurf Intra 50, Taylor Hobson) and non-contact method (IFM G4, Alicona).
|
|
|
Influence of the wall roughness on discharge coefficient of orifice
Jinek, Josef ; Golík,, Pavel (referee) ; Zachoval, Zbyněk (advisor)
This thesis deals with the influence of the wall roughness on discharge coefficient of sharp-edged circular bottom orifice. It supposed to verify, summarize and extend knowledge of orifice discharge. Author of this thesis determine a discharge coefficient by measurement. Values of discharge coefficient were measured for roughness of the wall represented by different diameters of grains and these values were compared with available values published in specialized bibliography by different scientists. At the thesis end was made a summary evaluation.
|
|
|
New trends in the field of stone mastic asphalts
Pfeiferová, Magdaléna ; Varaus, Michal (advisor)
The work consists of two parts. The first part is focused on the determination of an anti-skid properties of the test section on Vídenská street. The anti-skid properties will be measured using a pendulum tester and macrotexture will be set at the same time. Microtexture will be measured using a volumetric patch technique. In the second part we will try to gain an initial experience with design and testing of a low noise stone mastic asphalt. We will set basic characteristics and at the same time compare with a standard stone mastic asphalt. For the comparison two various bituminous binders are used. The water sensitivity, resistance against rutting and stiffness moduli are compared.
|
|
|
Assessment of runoff conditions on flow in the Morava river basin
Holá, Lucie ; Niklová, Věra (referee) ; Uhmannová, Hana (advisor)
The diploma thesis deals with the design of nature close to the flood protection of the city Prostějov at the confluence of the watercourses Romže and Hloučely and the flow Valova (Romže). In canculations there was solved capacity of individual sections and canculation of levels for one-year, five-year and twenty-year flow. For canculations there was used one-dimensional mathematical model HEC-RAS 5.0.3. Determination of roughness of bottom and slopes was based on personal visit. The result of this diploma thesis is evaluation of current state and proposal of a nature close to the flood protection in the individual streams in the city Prostějov. The thesis contains the calculation part and the drawing part documenting the proposed measure.
|
|
|
Functional surfaces and surface texture
Novák, Jiří ; Brandejs, Jan (referee) ; Svoboda, Pavel (advisor)
The aim of this bachelor publication was an elaboration of professional recherche about geometric product specification (GPS). My publication contains the comparison of the foregone and current norms, which include parameters surface texture and notation surface texture, relation of surface texture and surface function, incoming development trends and needful supplements.
|
guest ::
