|
|
Sulfur dioxide emissions
Borýsek, Václav ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with emissions of sulphur oxides. First are described their properties, influence on human health and their impact on the environment. Next thesis deals with present situation of emissions and emission limits. After that selected methods of reduction of sulphur dioxide emissions are described and for representative technology mass balance has been made. Last part describes taken measurements and presents their results.
|
|
|
The study of increase in efficiency of manufacturing preparation of technology
Šudoma, Michal ; Lána, Ivo (referee) ; Jurová, Marie (advisor)
This paper discusses different alternatives of more efficient preparation of spheroided graphite cast iron production. Secondary metallurgy and chemical heating technology are used to recast cast iron fused in copula furnace. The work applies the known physical-chemical rules used in the production of quality spheroided graphite cast iron in regular production conditions. Based on the previous developments, the aim was to prepare implementation of verified secondary metallurgy processes in adjusted casting ladle. The casting ladle was adjusted in order to allow execution of all processes required in order for the relevant standards and material lists requirements to be met in respect to spheroided graphite cast iron quality. Comments regarding the trends in ferroalloy metallurgy and related marketing approach of the company. The work is concluded by a summary of advantages brought in by the new approaches compared to the traditional ones from the economical as well as environmental perspective.
|
|
|
Problems with sulphur and silicon in biogas
Holub, Radim ; Jecha, David (referee) ; Beňo, Zdeněk (advisor)
The main objective of this bachelor’s thesis is a description of a composition of biogas (BG) and contained undesirable components, which include especially sulphur and silicon compounds. In an introductory chapter is given a definition of the biogas, principle of its creation, chemical composition and a share of undesirable components. In following chapters are described single undesirable components, their properties and negative impact on parts of equipment using biogas. The following are the methods to reduce the critical concentration values of these components or their complete removal from biogas. In the thesis are also given practical solutions to eliminate these undesirable components.
|
|
|
Biogas composition
Čekanová, Adéla ; Pěček, Jan (referee) ; Beňo, Zdeněk (advisor)
Content of the submitted bachelor thesis is a description of biogas chemical composition with following analysis of each unit, especially majority units, with use of different gas analysis methods. Main emphasis is set on biogas units which have undesirable effects while using it as energy source and on possibilities of removing them using set technologies. In larger scale the bachelor thesis is concerned with teoretical possibilities of removing sulphur from biogas and following methods used in work experience.
|
|
|
Waste material based high-performance sulphate binders
Hájková, Iveta ; Kolář,, Karel (referee) ; Rovnaníková, Pavla (referee) ; Gazdič, Dominik (advisor)
The topic of this dissertation was the preparation of a high-quality sulphate binder based on secondary raw materials. For this purpose, the work was primarily focused on the laboratory preparation of beta gypsum from the selected industrial gypsum, the design of the technological process of production and its verification by pilot tests. In the next step, the thesis dealt with the modification of beta gypsum by a selected set of liquefiers. In addition to commercial dehumidifiers, the possible beta casting of beta gypsum was tested by increasing the zeta potential of the gypsum suspension. At the end, a complete complex of construction products was developed based on laboratory and semi-prepared beta plasters, consisting of gypsum plasters, mastics, gypsum premix and small plaster casts.
|
|
|
Waste material based high-performance sulphate binders
Hájková, Iveta ; Kolář,, Karel (referee) ; Rovnaníková, Pavla (referee) ; Gazdič, Dominik (advisor)
The topic of this dissertation was the preparation of a high-quality sulphate binder based on secondary raw materials. For this purpose, the work was primarily focused on the laboratory preparation of beta gypsum from the selected industrial gypsum, the design of the technological process of production and its verification by pilot tests. In the next step, the thesis dealt with the modification of beta gypsum by a selected set of liquefiers. In addition to commercial dehumidifiers, the possible beta casting of beta gypsum was tested by increasing the zeta potential of the gypsum suspension. At the end, a complete complex of construction products was developed based on laboratory and semi-prepared beta plasters, consisting of gypsum plasters, mastics, gypsum premix and small plaster casts.
|
|
|
Sulfur dioxide emissions
Borýsek, Václav ; Štelcl, Otakar (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with emissions of sulphur oxides. First are described their properties, influence on human health and their impact on the environment. Next thesis deals with present situation of emissions and emission limits. After that selected methods of reduction of sulphur dioxide emissions are described and for representative technology mass balance has been made. Last part describes taken measurements and presents their results.
|
|
|
The study of increase in efficiency of manufacturing preparation of technology
Šudoma, Michal ; Lána, Ivo (referee) ; Jurová, Marie (advisor)
This paper discusses different alternatives of more efficient preparation of spheroided graphite cast iron production. Secondary metallurgy and chemical heating technology are used to recast cast iron fused in copula furnace. The work applies the known physical-chemical rules used in the production of quality spheroided graphite cast iron in regular production conditions. Based on the previous developments, the aim was to prepare implementation of verified secondary metallurgy processes in adjusted casting ladle. The casting ladle was adjusted in order to allow execution of all processes required in order for the relevant standards and material lists requirements to be met in respect to spheroided graphite cast iron quality. Comments regarding the trends in ferroalloy metallurgy and related marketing approach of the company. The work is concluded by a summary of advantages brought in by the new approaches compared to the traditional ones from the economical as well as environmental perspective.
|
|
|
Problems with sulphur and silicon in biogas
Holub, Radim ; Jecha, David (referee) ; Beňo, Zdeněk (advisor)
The main objective of this bachelor’s thesis is a description of a composition of biogas (BG) and contained undesirable components, which include especially sulphur and silicon compounds. In an introductory chapter is given a definition of the biogas, principle of its creation, chemical composition and a share of undesirable components. In following chapters are described single undesirable components, their properties and negative impact on parts of equipment using biogas. The following are the methods to reduce the critical concentration values of these components or their complete removal from biogas. In the thesis are also given practical solutions to eliminate these undesirable components.
|
|
|
Biogas composition
Čekanová, Adéla ; Pěček, Jan (referee) ; Beňo, Zdeněk (advisor)
Content of the submitted bachelor thesis is a description of biogas chemical composition with following analysis of each unit, especially majority units, with use of different gas analysis methods. Main emphasis is set on biogas units which have undesirable effects while using it as energy source and on possibilities of removing them using set technologies. In larger scale the bachelor thesis is concerned with teoretical possibilities of removing sulphur from biogas and following methods used in work experience.
|
guest ::
