|
|
Energy-saving family house in Jablunka
Mrnuštík, Petr ; Vrána, Jakub (referee) ; Počinková, Marcela (advisor)
The bachelor’s thesis focuses on designing a low-energy detached house in village Jablunka. Thesis is divided into two parts, first one is aimed at structural and architectural design, whilst the second one focuses on building services, especially heating with solid fuels. The house is divided into a two-storey and a single-storey part. Ground floor includes master bedroom, utility room and mainly open-plan living room connected to kitchen which opens onto a deck and garden. First floor then includes two bedrooms and study. Both floors have their own bathrooms with separate toilets. Structural system is designed as masonry walls from aerated concrete blocks, which are transferring load onto plain concrete foundation strips. Floor slab is to be made of reinforced concrete. Two-storey part is covered by prefabricated rib–and–filler gable roof with 15° slope, from aerated concrete fillers and reinforced concrete, the one-storey part has flat roof. Walls are insulated by 140 mm of mineral wool, plinth then by 120 mm of XPS. Ground slab will be insulated by 220 mm of graphite EPS, floor slab is insulated by 40 mm of impact sound insulation from mineral wool and 50 mm of EPS with installation layer. Flat roof is insulated by 220–340 mm of mineral wool with screed to fall function. Gable roof is then insulated by 180 mm PIR panels. Rainwater will be collected and stored in rainwater tank for gardening use, overflow will then lead to drainage blocks, where the water can be absorbed into soil, with overflow into stormwater sewer system. Ventilation is designed equal pressure, mechanical with enthalpy heat recovery exchanger and heating battery covering ventilation losses. Main heating source is solid fuel boiler, storing its energy in 750liter hot water tank, from which is the heat distributed into 200liter domestic hot water tank, ventilation heating battery and heating elements such as convectors, panel and rail radiators. As renewable source of energy is designed photothermal panels which will mainly heat domestic hot water, excess heat will then be stored in hot water tank.
|
|
|
Heating of flat house
Slíva, Lukáš ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The goal of this bachelor thesis is the design of heating systém and water heating for apartment house in township Jablůnka. In the theoretical part, I deal with the types of heating systems and radiators. In the computational part, I have designed the heat source, hot water heater, and the entire heating system. The conclusion of the thesis is a project, that contains a technical report and drawing documentation including attachments.
|
|
|
Heating multifunctional building
Čajčíková, Jolana ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The theme of this bachelor´s thesis are problems of condensing gas boiler rooms in the theoretical part and heating multifunctional building in the calculation part. The four-floor multifunctional building is situated in Brno in a slightly built-up area and includes commercial units, classrooms and administrative units for rent, an IT company and a restaurant for 120 people situated in the fourth floor. The heat source for this building is a gas condensing boiler room. The heating surface consists of steel panel radiators. There is forced ventilation installed in the building.
|
|
|
Heating of the kindergarten
Jetelina, Michal ; Wierzbická, Helena (referee) ; Počinková, Marcela (advisor)
This work is solving the proposal of heating a kindergarten. The theoretical part is focused on warm water heating, which is used in the proposal. The computational part includes a proposal of heating the building. The system is a combination of low temperature system and underfloor heating. As a warm source, there is a design of thermal pump of air and water, which is located in exterior. The ventilation of the building is natural or forced, depending on location. The work contains proposal of all needed equipment and also the design of the source of warm water.
|
|
|
Heating residential building
Blažek, Tomáš ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The aim of this bachelor’s thesis are issues of condensing boilers in theoretical part. The computational part solves design of heating and hot water in residential building in Kyjov. The four-floor residential building is situated in slightly bulit-up area. It consists of 9 flats for 24 persons. The heat source for this building is a gas condensing boiler. The heating surface consist of steel panel radiators, tubular heaters and convectors.
|
|
|
Heating of the logistics center
Spurný, David ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor thesis is to draw up a project of heating of a logistics centre in Brno. The thesis is divided into two parts. The first theoretical part is dedicated to a description of particular heat sources and the second analytical part to a development of a heating system design for the given premises. The building analysis and the heat loss draft will serve as the initial information for the project completion.
|
|
|
Heating using condensing technology
Jadrníčková, Kateřina ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The subject of this bachelor thesis is the design of heating and hot water preparation of an administrative building in the complex Svit in Zlín. The building has three above-ground floors. As a source of heat are designed gas condensing boilers here. In the theoretical part A is solved the problem of gas condensing boilers. The computational part B deals with the design of the heating system, the preparation of hot water and the safety, expansion and other equipment necessary for the design of central heating. The last part C consists of the technical report and the drawing documentation of the heating of the building.
|
|
|
Heat pumps in heating systems
Zaťková, Miroslava ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This master´s thesis addresses heating of the new three - storey office building, which is located in Brno Pisárky. The heating system is designed as a low-temperature system with forced circulation of water using mostly panel radiators. As the heat source was designed two variants. The first heat source is the heat pump air - water, which is installationed inside. The second heat source is a gas condensing boiler. The part of design is preparation hot water. Ventilation of the building is equal-forced. Experimental part of master´s thesis is focused on measuring the amount of electricity produced per year by photovoltaic panels on the existing house in Brno Pisárky. Thesis also includes measuring outdoor temperature and intensity of solar radiation. The result is a comparison of the need for electricity for the heat pump for heating family house, total electricity consumption family house and amount of electricity produced by photovoltaic panels.
|
|
|
Heating of the Multifunctional Building
Konečný, Ladislav ; Topič, Jan (referee) ; Vendlová, Lucie (advisor)
This diploma thesis proposes the heating system and ventilation in mixed-use building. The building is located in Uherské Hradiště. The object of this work is the selection of appropriate variants of two heat sources (gas boilers and solid fuel boiler). The project is focus on design of the heating system chosen mode of heating, which are gas boilers and the concept of forced ventilation. The theoretical part is focused on the regulation.
|
|
|
Heating of the kindergarten
Dužík, Vojtěch ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
This thesis concerns the heating of the kindergarten. The heating system is designed as low-temperature with the main source of heat which is heat pump of a special type air-water in inner design. Heat pump is completed with parallel bivalent source, which is an electric heating element. There are designed panel radiators in whole edifice. Hot water is being prepared by DHW cylinder. The heating of hot water is being provided by thermal pump in combination with electric DHW cylinder. The exchange of air in the whole of edifice is provided by a system of forced ventilation with heat recovery. In theoretical part I focus on heat pumps.
|
guest ::
