|
| |
|
|
Low-energy Security Device with (Espressif) ESP8266/ESP32 Module
Ondráček, Petr ; Lattenberg, Ivo (referee) ; Škorpil, Vladislav (advisor)
Bachelor's thesis discusses the design and realization of low-energy security device using Wifi module ESP32. The device will detect the opening of door/window/space by using magnetic contact and this event will be reported on appropriate cloud service and by e-mail. The theoretical part is focused on the Internet of Things problematics, cloud services and description of individual components of the final device. Second part of thesis is focused on designing of the linkage scheme, control program and calculation of power consumption of the device. Third part is already focused on practical realization of the designed device, designing and creation of printed circuit board and security box, programming, creation of the cloud channel that will visualize collected data and measurement of power consumption of the final device.
|
|
|
Production of Multilayer PCB
Janda, Ondřej ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
This master thesis introduces the problematics of multilayer printed circuit boards. Theoretical part is focused on materials used for production of multilayer PCB and their parameters. At the same time, it focuses on the pressing process of multi-layered PCB, the types of presses used and their advantages and disadvantages. Practical part describes the methodology and testing of the PCB to identify the reliability of chosen electrical parameters. Testing is aimed to simulate thermal stress during machine soldering and during thermal stress in the target environment.
|
|
|
Image data segmentation using deep neural networks
Hrdý, Martin ; Myška, Vojtěch (referee) ; Kiac, Martin (advisor)
The main aim of this master’s thesis is to get acquainted with the theory of the current segmentation methods, that use deep learning. Segmentation neural network that will be capable of segmenting individual instances of the objects will be proposed and created based on theoretical knowledge. The main focus of the segmentation neural network will be segmentation of electronic components from printed circuit boards.
|
|
|
Universal Tester of Radio Conditions for Narrowband IoT Communication Technology
Možný, Radek ; Štůsek, Martin (referee) ; Mašek, Pavel (advisor)
Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.
|
|
|
Design and construction of a simple music synthesizer
Ondryáš, Radek ; Čudek, Pavel (referee) ; Čech, Ondřej (advisor)
This paper deals with the topic of synthesizers. The first part of the paper provides a general description of synthesizers, their history, types, and important components. The next part of this paper focuses on sound generator chip Texas Instruments SN76477, specifically it’s functionality and ways of controlling its functions. The main part of this paper is designing and creating a synthesizer around the SN76477 sound chip and creating a box for the synthesizer from laser cut plywood.
|
|
|
Influence of Bottom Preheating in Rework of Assembled PCB
Čechák, Ondřej ; Bžoněk, Tomáš (referee) ; Starý, Jiří (advisor)
This bachelor's thesis introduces the problematics of physical mechanisms of heat transfer and the correlative mathematical formulas and the use of mentioned problematics in the technology of bottom preheating in the rework of assembled printed circuit boards. It explains the importance and reasons of use of this technology, not merely in the professional production. It focuses on expert analysis of the appliances based on their properties and clarifies the differences in basic types of the devices. The emphasis is then laid on a practical testing of the technical parameters of the preheating devices as well as on an experimental design and a practical testing of a local bottom printed circuit board preheater.
|
|
|
Flux Residues after Reflow Soldering
Uhlář, Vít ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The aim of this bachelor thesis is to solve flux residue characteristics on PCBś after reflow soldering and compare different solder pastes. The first part deals with the issue of solder paste application and flux residues. The second part focuses on the process of reflow soldering. The third part is devoted to the measurement methodology of flux residues. Finally, project is a practical part, which is summarized in the production of test samples and contains measurement results.
|
|
|
Narrow-band PLC modem
Skala, Milan ; Krajsa, Ondřej (referee) ; Mišurec, Jiří (advisor)
This bachelor's thesis deals with narrow band PLC modem for 230/400 V power line. In the first chapter we can find basic theory about using modulation, interference, impedance of line, communication, capacitive and inductive coupler. Next chapter deals with design and simulation of capacitive coupler, transceiver circuit, receiver circuit, power supply and circuit for modem synchronization with power line frequency. In this chapter we can find information about building a converter from UART to USB. Third chapter of this thesis is dedicated to designing the printed circuit board and building the modem. Last chapter deals with setting the modem switches, description of its inputs and outputs and basic manual for the modem's software.
|
|
|
Device for automatic measurement of volt-ampere characteristics
Ondráček, Petr ; Vrba, Kamil (referee) ; Lattenberg, Ivo (advisor)
The Master's thesis discusses the design and realization of electronic meter of volt-ampere characteristics using Wifi module ESP32. The device is designed to be able to measure the characteristic in the voltage range of +/- 20 V and current range of +/- 200 mA. The device is controlled by web interface. The user is able to connect to it with for example his or her smartphone. This interface enables the user to configure various parameters, including the range of measurement and the power restriction. Furthermore, it is possible to graphically display the measured characteristic and export the data. To be independent on the outer network, the ESP32 is operated as an access point, which is creating a new simple network without the internet connection. In the Master's thesis, the principle of voltage and current measurement is explained theoretically, the circuit connection of device and the printed circuit board are designed and the cover of the device is modeled. Also the process of creating the device according to the design is described and the cover of the device is printed on 3D printer. After that, the control program is designed, described and uploaded into the resulting device. Finally, the functionality of the device is tested by measuring the volt-ampere characteristics of a few components.
|
guest ::
