|
Laboratory exercise - IQRF module for measuring mesh networks
Goryl, Juraj ; Paluřík, Pavel (referee) ; Jablončík, Lukáš (advisor)
This bachelor’s thesis deals with creating a laboratory task integrated into the subject of "Communication Systems for IoT." The first part of the thesis consists of familiarizing oneself with the issues of the IQRF network, its topology, and the network’s capabilities. The thesis compares IQRF technology with other IoT technologies commonly used in this field. The practical part of the thesis comprises the design of a module for the IQRF transmitter TR-72DA in the form of a mini PCIe card. Another part of the thesis deals with establishing communication with the BPC-IoT board using the SPI bus, with temperature measurement used as an example. The final part of the thesis is the assignment for the actual laboratory task. The appendices also include schematics and source code of programs for both the BPC-IoT board and the IQRF transmitter.
|
|
Digital Signal Processor for Handheld RFID Reader
Benetka, Miroslav ; Zamazal, Michal (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with design and realization of a module for a digital signal procesor, for handheld RFID reader working in UHF band. It utilises a special chip EM4298 for RFID signals processing. Module is controlled by the microcontroller ATmega32L, which communicates with the PC through USB bus. Settings in EM4298 is made by a service program which processes received identifying data obtained from tags. Source codes for microcontroller are created in AVR Studio 4.13 program. Source codes for microcontroller are created in C++ Builder 6.0 program. Further thing is Desing and realization of analog interface and a UHF transceiver for wireless communication with tags. A Webench program was used for the analog interface design, which is freely available on the internet. For verification of parameters of the analog interface it was used PSpice 10.0 program. The UHF transceiver is build-up with a MAX2903 chip (transmitter) and AD8347 (receiver) and transmitting and receiving antennae.
|
|
Optical cabling - a comparison
Zelinková, Vlasta ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The thesis is focused on an analysis of mounting and cable laying fiber optic lines. The first chapter includes an analysis is made comparing parameters fiber and copper cabling, mainly in terms of access networks. This part specifies the various transmission media and access networks that are operated on them. Attention is focused on the transmission rate and its possible impact, provided the capacity and other important values. This section also demands site maintenance, service, or any failure on the routes of these networks. With this goal in the second chapter was created several designs networks that provide insight into possible solutions to the situation for emerging networks, and for upgrading existing networks, using both management and elements of optical and copper, or combinations thereof. Provide information from expert sources and verified directs the work of the future and to clarify further the eventual development of individual technologies. Most other space and offers the potential of optical technology, nature, and therefore the third chapter is fully devoted to only the transmission medium. At the beginning of this section is a theoretical analysis of possible ways of cable laying fiber optic cabling with a comparison of advantages and disadvantages. The most stable is an underground installation, which is costly in standard cases. As a result of these factors proved to be a possible solution using the underground installation of water pipeline shutdown. Therefore, the optical path designed, organized and implemented laying of fiber optic cable. By completing the inspection measurement and evaluation of the cost compared with other ways of installing fiber optic cable.
|
|
Optical cabling - a comparison
Zelinková, Vlasta ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The thesis is focused on an analysis of mounting and cable laying fiber optic lines. The first chapter includes an analysis is made comparing parameters fiber and copper cabling, mainly in terms of access networks. This part specifies the various transmission media and access networks that are operated on them. Attention is focused on the transmission rate and its possible impact, provided the capacity and other important values. This section also demands site maintenance, service, or any failure on the routes of these networks. With this goal in the second chapter was created several designs networks that provide insight into possible solutions to the situation for emerging networks, and for upgrading existing networks, using both management and elements of optical and copper, or combinations thereof. Provide information from expert sources and verified directs the work of the future and to clarify further the eventual development of individual technologies. Most other space and offers the potential of optical technology, nature, and therefore the third chapter is fully devoted to only the transmission medium. At the beginning of this section is a theoretical analysis of possible ways of cable laying fiber optic cabling with a comparison of advantages and disadvantages. The most stable is an underground installation, which is costly in standard cases. As a result of these factors proved to be a possible solution using the underground installation of water pipeline shutdown. Therefore, the optical path designed, organized and implemented laying of fiber optic cable. By completing the inspection measurement and evaluation of the cost compared with other ways of installing fiber optic cable.
|
|
Digital Signal Processor for Handheld RFID Reader
Benetka, Miroslav ; Zamazal, Michal (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with design and realization of a module for a digital signal procesor, for handheld RFID reader working in UHF band. It utilises a special chip EM4298 for RFID signals processing. Module is controlled by the microcontroller ATmega32L, which communicates with the PC through USB bus. Settings in EM4298 is made by a service program which processes received identifying data obtained from tags. Source codes for microcontroller are created in AVR Studio 4.13 program. Source codes for microcontroller are created in C++ Builder 6.0 program. Further thing is Desing and realization of analog interface and a UHF transceiver for wireless communication with tags. A Webench program was used for the analog interface design, which is freely available on the internet. For verification of parameters of the analog interface it was used PSpice 10.0 program. The UHF transceiver is build-up with a MAX2903 chip (transmitter) and AD8347 (receiver) and transmitting and receiving antennae.
|