|
|
The Study Efficiency of Utilization of Workplacess in Selected Operation
Milota, Tomáš ; Tesař, Rostislav (referee) ; Jurová, Marie (advisor)
This thesis deals with the analysis of data obtained by observing and measuring workplaces of assembly lines with a focus on the efficiency of their utilization, through selected elements of industrial engineering, which the reader can get acquainted with in the theoretical part of the thesis. In this thesis the line productivity during the shifts is analyzed, an ideal line balancing condition is defined and suggestion for changing the time of line consumption norm according to the measured line cycle time is made. According to the complex analyzes of the workplaces, suggestions are concluded and an economic appreciation of these proposals is also elaborated. The author of this thesis finds the main benefit of this work in increasing of the productivity of the analyzed line in the case of implementation of solution designs.
|
|
|
Lean production of electronics
Hála, Antonín ; Vyškov, Jiří Pospíšil, VELUX (referee) ; Špinka, Jiří (advisor)
Aim of diploma thesis “Lean production of electronics” is to apply lean production on workplaces in concrete company. Object of thesis is to orientate in lean production and apply its individual methods on workplace. First part of thesis is dealing with theoretical preparation, understanding lean production and methods of lean production. Second part is dealing with analyzing production processes, application of methods of lean production and designing workplaces.
|
|
|
Value stream analysis
Perutka, Michal ; Doňarová, Jana (referee) ; Fiala, Alois (advisor)
The aim of the diploma thesis “Value stream mapping” is to analyse the montage workplace of the company IFE-CR, a.s. with focus on the value stream and the methods of lean production. The thesis aims to identify priorities for applying lean production methods at the montage workplace and to propose concrete measures in order to reduce different types of wasting. The first part of the thesis is dealing with the theory, understanding the main principles and methods of lean production, as well as with the method of value stream mapping. The second part is dealing with value stream analysis of the montage workplace and proposes concrete measures to reduce wasting and to increase the production effectiveness, respectively to improve the material stream trough implementation of selected lean production methods in the montage workplace.
|
|
|
The Evaluation the Financial Situation of the Firm
Zeman, Karel ; Bureš, Miroslav (referee) ; Luňáček, Jiří (advisor)
The aim of this master’s thesis is to propose the steps leading to the improvement of the financial situation of a mid-sized manufacturing company. In order to achieve this aim, the financial analysis is performed. It defines the company’s weaknesses and it serves as a background for a suggestion for corrective actions leading to the improvement. Based on the measurability of the corrective actions, the comparison of the current and predicted situation is made in the final conclusion. It is realized with the Index IN05 bankruptcy model. The corrective actions proposed aim in particular at the operational and production management. They focus mainly on the weaknesses defined by the financial analysis – reduction of inventories and increase of marginal profit in order to strengthen liquidity, reduce debt ratio and improve financial health score in general.
|
|
|
Mapinng and improving logistic flow in the firm ZEBR.
Kmeť, Lenka ; Vyroubal, Petr (referee) ; Špinka, Jiří (advisor)
The aim of the project is to chart the course of logistics and information flows of the selected company, to eveluate the entire process and to find improvements. In the first part there is mentioned an introduction into methods of lean manufacturing, value stream mapping and throughput time calculations. In the next section the flow of values is mapped and the map of current state is created. Futhermore, the throughput time of selected parts is computed and the mounting diagram of measured products is assembled. On to these materials are founded the sources of wasting and solutions are suggested. Afterwards on the basis of the obtained data are given solutions eveulated in terms of economic indicators.
|
|
|
Problems in Solder Paste Stencil Printing for Fine Pitch Components
Šimeček, Ondřej ; Polsterová, Helena (referee) ; Starý, Jiří (advisor)
Despote the indisputable advantages of fine-pitch components, is need to calculate with a few trouble during production, especially increased requirements for accuracy of mounting and solder printing. In this work I’m concerned with problems of solder printing for these components and evaluation using SPC. For the evaluation I used 3D paste inspection based on laser scanning of the surface. The output of this work is to describe the principles of solder printing and elaborating of GR&R, SPC analysis and histograms of solder printing for some outputs. I focused in my master thesis on motive design change of problematic components and economic evaluation of the adjustments.
|
|
|
Mapinng and improving logistic flow in the firm ZEBR.
Kmeť, Lenka ; Vyroubal, Petr (referee) ; Špinka, Jiří (advisor)
The aim of the project is to chart the course of logistics and information flows of the selected company, to eveluate the entire process and to find improvements. In the first part there is mentioned an introduction into methods of lean manufacturing, value stream mapping and throughput time calculations. In the next section the flow of values is mapped and the map of current state is created. Futhermore, the throughput time of selected parts is computed and the mounting diagram of measured products is assembled. On to these materials are founded the sources of wasting and solutions are suggested. Afterwards on the basis of the obtained data are given solutions eveulated in terms of economic indicators.
|
|
|
The Study Efficiency of Utilization of Workplacess in Selected Operation
Milota, Tomáš ; Tesař, Rostislav (referee) ; Jurová, Marie (advisor)
This thesis deals with the analysis of data obtained by observing and measuring workplaces of assembly lines with a focus on the efficiency of their utilization, through selected elements of industrial engineering, which the reader can get acquainted with in the theoretical part of the thesis. In this thesis the line productivity during the shifts is analyzed, an ideal line balancing condition is defined and suggestion for changing the time of line consumption norm according to the measured line cycle time is made. According to the complex analyzes of the workplaces, suggestions are concluded and an economic appreciation of these proposals is also elaborated. The author of this thesis finds the main benefit of this work in increasing of the productivity of the analyzed line in the case of implementation of solution designs.
|
|
|
The Evaluation the Financial Situation of the Firm
Zeman, Karel ; Bureš, Miroslav (referee) ; Luňáček, Jiří (advisor)
The aim of this master’s thesis is to propose the steps leading to the improvement of the financial situation of a mid-sized manufacturing company. In order to achieve this aim, the financial analysis is performed. It defines the company’s weaknesses and it serves as a background for a suggestion for corrective actions leading to the improvement. Based on the measurability of the corrective actions, the comparison of the current and predicted situation is made in the final conclusion. It is realized with the Index IN05 bankruptcy model. The corrective actions proposed aim in particular at the operational and production management. They focus mainly on the weaknesses defined by the financial analysis – reduction of inventories and increase of marginal profit in order to strengthen liquidity, reduce debt ratio and improve financial health score in general.
|
|
|
Value stream analysis
Perutka, Michal ; Doňarová, Jana (referee) ; Fiala, Alois (advisor)
The aim of the diploma thesis “Value stream mapping” is to analyse the montage workplace of the company IFE-CR, a.s. with focus on the value stream and the methods of lean production. The thesis aims to identify priorities for applying lean production methods at the montage workplace and to propose concrete measures in order to reduce different types of wasting. The first part of the thesis is dealing with the theory, understanding the main principles and methods of lean production, as well as with the method of value stream mapping. The second part is dealing with value stream analysis of the montage workplace and proposes concrete measures to reduce wasting and to increase the production effectiveness, respectively to improve the material stream trough implementation of selected lean production methods in the montage workplace.
|
guest ::
