|
|
Metric survey documentation of the part of the main palace of Veveří Castle
Biriukov, Ilia ; Volařík, Tomáš (referee) ; Machotka, Radovan (advisor)
The main aim of the master's thesis is to create documentation for the southern part of the 3rd floor of the palace with a pointed tower in the Veveří Castle complex, based on laser scanning and measurements using the Faro Focus 3D device, and to create a 3D model of the area of interest. This documentation includes floor plans, sections, and elevations of the building's facades, and it is an integral component for the future reconstruction. To achieve this aim, the master's thesis consists of two parts: theoretical and practical. The theoretical part describes the measured object and the measurement methods used. The practical part includes an analysis of the acquired data and detailed descriptions of the data processing steps in various software programs such as SW Groma, Trimble Real Works. It presents methods for creating 2D drawing documentation and 3D wireframe model supplemented with surfaces using Autodesk AutoCAD and Trimble Business Center software. All of these steps are aimed at obtaining high-quality documentation that will serve as a basis for the reconstruction of the building.
|
|
|
Testing of an Accuracy of Mobile Laser Scanning
Hoffmannová, Lada ; Volařík, Tomáš (referee) ; Kuruc, Michal (advisor)
Diploma thesis describes collecting of data by mobile mapping system Riegl VMX-450. Science centre AdMas was captured with mobile mapping system. For the purpose of testing the accuracy, a calibration field was constructed in AdMaS. Main part of the thesis deals with testing of the accuracy of point cloud. Calibration field's coordinates were obtained by adjustment of the geodetic network using the least squares adjustment. During the testing, the coordinates of the calibration field points determined by the adjustment of the geodetic network and the coordinates of the points determined from the point cloud were compared. Another part of the work deals with testing of the accuracy, when target's position is in different height levels.
|
|
|
3D Modeling in Photomodeler Scanner Environment
Ráczová, Gabriela ; Opatřilová, Irena (referee) ; Hanzl, Vlastimil (advisor)
Purpose of this thesis is to create a 3D model of the bridge between buildings of Faculty of Civil Enineering on the street Rybkova. The 3D model was created by method close range photogrammetry. Ground control points were determined intersection and the coordinates were calculated. Photos of building were taken by camera Nikon COOLPIX 810. For processing of the photos were use a program PhotoModeler Scanner.
|
|
|
Metric survey documentation of the main palace of Veveří Castle
Hirš, Bořivoj ; Kratochvíl, Radim (referee) ; Machotka, Radovan (advisor)
The aim of thesis was a production of blueprints of part of the 3rd floor of the main palace of Veveří castle. The survey was accomplished by the means of laser scanning and was followed up by the point cloud-based production of 2D drawings. It consists of the layout, cross sections, facade views in a scale of 1:50. These CAD drawings will be used for reconstruction of the 3rd floor of the building. The thesis consists of theoretical part further divided to the location presentation, survey methods used description and specifics of the heritage objects documentation. Then the practical part follows with processing and production of data in various software description.
|
|
|
Determination of coordinates and heights of calibration field points
Pospíšil, Ondřej ; Vondrák, Jiří (referee) ; Machotka, Radovan (advisor)
The bachelor's thesis describes the determination of coordinates and heights of calibration field points in the AdMaS complex. An auxiliary measuring network was built in the specified locality. From the tops of this network, a detailed survey of the calibration field points followed. The main part of the work deals with testing the accuracy of determining the coordinates and heights of points. The final part of the work deals with the comparison and testing of the accuracy of determining the coordinates and heights of points between the new determination of the points of the calibration field and the determination from the previous stages of measurement. All protocols, calculations, lists of coordinates, overviews, including a technical report are located in the appendices to this bachelor's thesis.
|
|
| |
|
|
Creation of a purpose map of the castle courtyard by the laser scanning method
Kučeravý, Peter ; Kratochvíl, Radim (referee) ; Machotka, Radovan (advisor)
This diploma thesis is dealing with creation of thematical map of castle courtyard of the Veveří castle using the method of laser scanning. The thesis describes the construction of a survey net which is important for measuring control points and then scanning of the area using the scanner FARO Focus 3D. The thesis contains a description of the method of laser scanning and point cloud processing in Trimble RealWorks software. Furthermore, this thesis deals with the accuracy of the point cloud and compares the laser scanning method with the typical tachymetric method according to time duration.
|
|
|
Determination of coordinates and heights of calibration field points
Pospíšil, Ondřej ; Vondrák, Jiří (referee) ; Machotka, Radovan (advisor)
The bachelor's thesis describes the determination of coordinates and heights of calibration field points in the AdMaS complex. An auxiliary measuring network was built in the specified locality. From the tops of this network, a detailed survey of the calibration field points followed. The main part of the work deals with testing the accuracy of determining the coordinates and heights of points. The final part of the work deals with the comparison and testing of the accuracy of determining the coordinates and heights of points between the new determination of the points of the calibration field and the determination from the previous stages of measurement. All protocols, calculations, lists of coordinates, overviews, including a technical report are located in the appendices to this bachelor's thesis.
|
|
|
Metric survey documentation of the main palace of Veveří Castle
Hirš, Bořivoj ; Kratochvíl, Radim (referee) ; Machotka, Radovan (advisor)
The aim of thesis was a production of blueprints of part of the 3rd floor of the main palace of Veveří castle. The survey was accomplished by the means of laser scanning and was followed up by the point cloud-based production of 2D drawings. It consists of the layout, cross sections, facade views in a scale of 1:50. These CAD drawings will be used for reconstruction of the 3rd floor of the building. The thesis consists of theoretical part further divided to the location presentation, survey methods used description and specifics of the heritage objects documentation. Then the practical part follows with processing and production of data in various software description.
|
|
|
Creation of a purpose map of the castle courtyard by the laser scanning method
Kučeravý, Peter ; Kratochvíl, Radim (referee) ; Machotka, Radovan (advisor)
This diploma thesis is dealing with creation of thematical map of castle courtyard of the Veveří castle using the method of laser scanning. The thesis describes the construction of a survey net which is important for measuring control points and then scanning of the area using the scanner FARO Focus 3D. The thesis contains a description of the method of laser scanning and point cloud processing in Trimble RealWorks software. Furthermore, this thesis deals with the accuracy of the point cloud and compares the laser scanning method with the typical tachymetric method according to time duration.
|
guest ::
