|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
| |
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
| |
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
|
Dynamic analysis of structure loaded seismic loads
Havlíková, Ivana ; Nevařil,, Aleš (referee) ; Vlk, Zbyněk (advisor)
The purpose of my master’s thesis is the solution steel hall with concrete columns, that is loaded by an earthquake. This simulation program was used RFEM. To calculate was used the spectral and temporal analysis, and that on models of structures with several combinations of materials. The analysis was performed for both the general direction of the earthquake, so for combinations of directions according to standard procedures in EC8.
|
|
|
Ice Hockey Stadium
Čech, Martin ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
Work deals with variant design of steel structure of ice hockey stadium located in Opava. It is a three-aisled hall with shape consists of intersection of ellipse and rectangle with dimensions 70 x 82m. The roof has cylindrical shape with approx. 50 m radius. The building is about 14 m high. Object is divided to three parts – main aisle and two side aisles. The main aisle contains of a rectangle of dimensions 40 x 42 m and two semicircles of radius approx. 20 m. Frames of main aisle are made of arc roof truss connected to steel plate columns. The side aisles with rectangular shape with dimensions 15 x 42 m are connected to main aisle. The structure of side aisle is made of a sloped roof truss. Longitudinal bracing and cross bracing are used to obtain spatial rigidity of the structure. Roof and wall cladding is made of Kingspan sandwich panels.
|
|
|
Reinforced concrete structure of a department store
Košík, Ondřej ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
The bachelor thesis deals with the design and assessment of main parts of the carried reinforced concrete structure of a department store. The aim of the thesis was to design and evaluate the reinforced concrete structure of the ceiling slab, pillar, staircase and the wall. A graphical documentation of selected elements is also a part of the thesis. The calculation of internal forces was performed in a computational program SCIA Engineer 17, subsequently this calculation was verified by a manual method. The construction is designed according to the ČSN EN standards.
|
|
|
Static analysis of the lookout tower
Šoupalová, Kristýna ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
This bachelor’s thesis deals with the static analysis of the steel construction of the lookout tower in the shape of a helix. Two 3D models, which differs in the way the columns are modeled, were made with RFEM 5.25 software by Dlubal company. The models are loaded with the calculated loads and afterwards the results of both models are compared. There are also a third 3D model, which includes surfaces. This model is put to a wind tunnel through Dlubal RWIND software. Then the comparison of the wind loads calculated according to the valid standard and the RWIND results is made.
|
|
|
Information Centre
Kovář, Jindřich ; Štrba,, Michal (referee) ; Barnat, Jan (advisor)
This bachelor thesis is concerned with the static project and the consideration of the carrier steel construction of the information centre that means the two-storeyed building with the 24 x 24m extent. The project is solved by two options. In both cases, the steel basis with components united by articulated joints is concerned. These are pillars, supporting joists and ceiling beams that are composited with a concrete desk so that they ensure the position stability in a horizontal direction. The both options differ from each other by the position stability method in a vertical direction. In the first case, the vertical clamps avoid the deformation. In the second case, two frame constructions are designed for both yawing directions. The result was the choice of the first method that is discussed in a more detailed way further.
|
guest ::
