|
| |
|
|
Recoil forces measurement after shotaVibration Test Stand
Rozum, Stanislav ; Kubinec,, Peter (referee) ; Frýza, Tomáš (advisor)
The thesis describes design and construction of vibration generator driver. The device is controlled via standard Ethernet interface and allows user to change parameters of generated function in PC application which reads and evaluates frequency and amplitude from real-time measured data while the test is running. In the introduction, vibration tests and choice of generators and power amplifiers are described. Next part is focused on every aspect of the hardware design. Last two chapters implement firmware for all three microcontrollers and software for PC application.
|
|
|
Class D audio power amplifier for bass guitar
Appel, Daniel ; Petržela, Jiří (referee) ; Brančík, Lubomír (advisor)
The main goal of this project was a synthesis of audio power amplifier and preamplifier for bass guitar with features suitable for this kind of instrument. The project was divided into 6 parts. The first part is a brief introduction to classes of power amplifiers, the second part is about function of blocks of which the class d audio power amplifier consist. In the third part the designed circuits and their properties are discussed. The simulation of circuits in PSICE are also included in this part. The design of power supply unit is discussed in fourth part. In the fifth there is design of chassis and other mechanical constructions. In the sixth part, there are results of experimental measurements of the amplifier prototype. In the appendix of this bachelor thesis are enclosed the schematics, printed circuit board designs, and photographic documentation of amplifier prototype.
|
|
|
Ultrasonic Directional Speaker
Sedlák, Jiří ; Michalec, Jaroslav (referee) ; Mikulka, Jan (advisor)
The master´s thesis deals with theoretical research and practical application of the principle of spreading acoustic waves through nonlinear medium. The theoretical part describes five different types of amplitude modulation and their mathematic representation, which were verified by the program Matlab. Next, the impedance characteristic of ultrasound PZT transducer was measured and the design of PWM modulator and class D amplifier was described. The practical part of the master´s thesis contains the realization of the parametric loudspeaker assembled from the class D amplifier and the PWM modulator. In conclusion, the designed parametric loudspeaker was measured and the individual types of amplitude modulation were compared with respect to the total harmonic distortion of transmitted useful signal.
|
|
|
Ultrasonic Directional Speaker
Sedlák, Jiří ; Michalec, Jaroslav (referee) ; Mikulka, Jan (advisor)
The master´s thesis deals with theoretical research and practical application of the principle of spreading acoustic waves through nonlinear medium. The theoretical part describes five different types of amplitude modulation and their mathematic representation, which were verified by the program Matlab. Next, the impedance characteristic of ultrasound PZT transducer was measured and the design of PWM modulator and class D amplifier was described. The practical part of the master´s thesis contains the realization of the parametric loudspeaker assembled from the class D amplifier and the PWM modulator. In conclusion, the designed parametric loudspeaker was measured and the individual types of amplitude modulation were compared with respect to the total harmonic distortion of transmitted useful signal.
|
|
|
Recoil forces measurement after shotaVibration Test Stand
Rozum, Stanislav ; Kubinec,, Peter (referee) ; Frýza, Tomáš (advisor)
The thesis describes design and construction of vibration generator driver. The device is controlled via standard Ethernet interface and allows user to change parameters of generated function in PC application which reads and evaluates frequency and amplitude from real-time measured data while the test is running. In the introduction, vibration tests and choice of generators and power amplifiers are described. Next part is focused on every aspect of the hardware design. Last two chapters implement firmware for all three microcontrollers and software for PC application.
|
|
|
Class D audio power amplifier for bass guitar
Appel, Daniel ; Petržela, Jiří (referee) ; Brančík, Lubomír (advisor)
The main goal of this project was a synthesis of audio power amplifier and preamplifier for bass guitar with features suitable for this kind of instrument. The project was divided into 6 parts. The first part is a brief introduction to classes of power amplifiers, the second part is about function of blocks of which the class d audio power amplifier consist. In the third part the designed circuits and their properties are discussed. The simulation of circuits in PSICE are also included in this part. The design of power supply unit is discussed in fourth part. In the fifth there is design of chassis and other mechanical constructions. In the sixth part, there are results of experimental measurements of the amplifier prototype. In the appendix of this bachelor thesis are enclosed the schematics, printed circuit board designs, and photographic documentation of amplifier prototype.
|
|
| |
guest ::
