|
|
Integrated rescue system - station type P1
Bambasová, Petra ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
THE THEME IS OF THE STUDY AND DOCUMENTATION THE IMPLEMENTATION OF THE CONSTRUCTION OF THE NEW BUILDING OF THE INTEGRATED RESCUE SYSTEM – STATION TYPE P1. THE FIRE STATION IS DESIGNED INTO THREE OPERATING UNITS. THE MAIN ACCESS TO THE BUILDING IS IN THE 1ST FLOOR ADMINISTRATIVE AREA IN THE SOUTH-EAST SIDE OF THE BUILDING. THIS PART OF THE BUILDING HAS 2 FLOORS. THE OBJECT CONTINUES TO THE SOUTHEAST TOWARDS THE PATH OF THE GARAGE WITH 5 SPACES. ON THE NORTHWEST EDGE OF THE OBJECT IS A TECHNICAL BACKGROUND WITH A DISHWASHER AND A DRYER. TO DEVELOP OVER THE OBJECT PERSONAL VISITS FROM TWO FIRE STATIONS. ONE REGIONAL IN CESKE BUDEJOVICE AND SECOND DISTRICT IN TÝN NAD VLTAVOU. FOR INSPECTION AND UNDERSTANDING PROPOSAL FOR A NEW FIRE STATION ALSO HELPED TOUR OF DOCUMENTATION PROJECT ALREADY MADE ON CONSTRUCTION FIRE STATION IN MARIANSKE LAZNE AND FRYMBURK.
|
|
|
Apartment building
Kadlec, Michal ; Hnízdilová, Aneta Aya (referee) ; Daněk, Lukáš (advisor)
The content of this bachelor thesis is the design of the new apartment building in the town of Velké Meziříčí. It is an object with four above-ground floors and a abasement. The vertical supporting structures are designed from ceramic masonry, in the basement from monolithic reinforced concrete. The object will be covered with a pitched roof. The design documentation has been prepared according to the valid legal technical regulations.
|
|
|
Design of the RC slabs of the flat house
Reinoha, David ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The topic of the bachelor thesis is a new two-storey production building with an administrative part on the second floor and a production space on the ground floor The bachelor thesis deals with the static assessment of selected main bearing elements of the whole building in details for building permit. The main vertical supporting structure here is peripheral ceramic masonry, which is bounded by iron-concrete wreaths at the level of each of the two floors. The building is roofed with wooden nailed roof trusses placed on an in to wall-anchored wooden beam. The main supporting horizontal structure forming the ceiling between the first and second above-ground floors is made up of prefabricated Spiroll ceiling panels, which are placed on the stiffening wreath 1NP. The foundation structures are made of a monolithic concrete waist and consequently of a prefabricated lost formwork.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Family house - Dvůr Králové nad Labem
Výborný, Vojtěch ; Polášek, Josef (referee) ; Eliáš, Luboš (advisor)
The subject of this bachelor thesis is the design and execution of project documentation for a family house with architectural planto or art studio, which is situated between cities Dvůr Králové nad Labem and Verdek. Building is designed as a detached two-storey building with one underground and one above-ground storey. House is designed for a family of four and one external worker. Road to the building and main entrance to the building is from the north, where is also a garage. The residential part is oriented mainly to the south. The building construction system is designed from the Porotherm system. Vertical masonry is made of ceramic blocks Porotherm and from concrete blocks BEST (part 1.S). Horizontal structures are made of reinforced concrete. All the roofs are single-skinned and flat roofs. The building is based on reinforced concrete foundation strips.
|
|
|
Holiday apartment house in Horní Bečva
Blinka, Jaroslav ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
The diploma thesis deals with the design of the holiday apartment house. The building with an irregular floor plan has four storeys and it is covered with a flat roof with vegetation in the level above 1.NP a gabled roof in a level above 4.NP. The apartment house offers ten separate apartment flats intended for temporary or permanent accommodation. It also includes a public area, including refreshments and relaxation zone with swimming pool.
|
|
|
Apartment building
Marek, Václav ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is a new building of an apartment house in Chotěboř. The apartment building is designed from the four-storey part and from the five-storey part, the floors are finished with a residential attic. The apartment building is connected to the existing housing development, installed in a slightly sloping terrain. The apartment building contains seventeen housing units, the apartments are designed for housing four-member families, while apartments of the studio type are designed for two persons. The first floor is designed for the technical facilities of the building, there is also a commercial area that is considered for the operation of a hairdresser. Other above-ground floors consist of housing units. The apartment house is covered with a saddle seddle roof, in the part of the fifth floor there is also an outdoor terrace with a flat roof. The vertical load-bearing and non-load-bearing structures are formed by the Porotherm brick system. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The foundation structures are made of monolithic concrete and monolithic prefa. The parking space is designed outside the building, with parking for the disabled. The project was developed in the ArchiCad graphics program. All constructions comply with valid standards and regulations.
|
|
|
Mixed-use Building
Fibikar, Tomáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.
|
|
|
High standard detached house
Krištof, Marek ; Rebrova, Tatiana (referee) ; Daněk, Lukáš (advisor)
The aim of my bachelor thesis is the design and elaboration of project documentation for the realization of a building of an high standard family house in Brno. The building is located in the cadastral area Žebětín, on parcels 1607/8 and 1607/68. The design of the building respect the municipality`s municipal plan. The object is set on a sloping terrain. The building has two above ground floors, the 1st floor is partially embedded in the terrain. In the 2nd floor there is a main entrance to the building and to the garage. The high-standard family house is designed for a four-member family.The construction system is wall-mounted, brickwork made of ceramic fittings. The roof is single-layer flat. The perimeter shell is designed as a ventilated facade with.
|
|
|
Apartment Building
Borková, Sabina ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building in Litomyšl. The apartment building is located in the northwestern part of Litomyšl, in an area designated for mass housing. It is a detached three-storey house that has no basement. There are 6 residential units and each apartment unit has its own garage. On the northwest side there are 12 parking spaces. The vertical construction system is made of ceramic blocks. The building is insulated by a contact insulation system ETICS made of mineral wool. Horizontal structures are made of ceiling panels filigran SPF 6 thickness of 250 mm. The balcony slabs are made of a monolithic slab with a thickness of 150 mm brought out by ISO – beams. Movement between the individual floors is ensured in the building by means of a monolithic reinforced concrete staircase and an elevator. The walls around the elevator shaft are made of lost formwork. Due to unfavorable foundation conditions, the building is based on a reinforced concrete foundation slab, which is made under the entire ground plan of the building. Above this plate there is a free space called "crawl space". Above that space there is a reinforced concrete slab, which forms the supporting layer of the floor on the ground floor. The roof of the apartment building is single-walled, vegetative. The design itself is carried out according to the permissible regulations in this locality. Part of the bachelor thesis is the management of the technical equipment of the buildings of the distribution in the building and the assessment of building physics (thermal technology, acoustics and lighting). The following programs were used for the elaboration of the project documentation: AutoCAD 2021, ArchiCAD 23, Building Designe, Hluk +, DEKSOFT, Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Adobe Acrobat
|
guest ::
