|
|
Aerodynamic design of transonic UAV glider
Kóňa, Marián ; Pejchar, Jan (referee) ; Zikmund, Pavel (advisor)
This master thesis is focused on aerodynamic design of transonic glider, which is assigned for following an airliner at cruising regime of flight. Main goal of the thesis is to determine basic geometrical design of airplane with respect to Whitcomb aera rule, mass analysis and drag polar. Weight analysis includes determining center of gravity according to longitudinal static stability margin. The drag polar of the airplane is determine for cruising regime of flight, that means the regime of following an airliner.
|
|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
|
Modification of the landing gear of the Irbis aircraft
Forman, Tomáš ; Vaněk, František (referee) ; Šplíchal, Jan (advisor)
This master thesis deals with the landing gear rebuild from tail gear to nose gear of the M-4 Irbis aircraft. The first chapter presents the aircraft in its current state and includes some technical data, too. The theoretical information about types of landing gears, its characteristics, pros and cons and the typical representatives for each type of landing gear are mentioned in the second chapter. The third chapter is about landing gear loads that occur during landing and about the load calculation according to UL 2 regulation. The following chapter shows the construction of the new landing gear, including some of the suggested, but not realised, designs. In the fifth chapter, there is a landing gear strength calculation of some of the gear components. The calculation is analytical and then uses FEM. The very last chapter then shows the effect of new landing gear on the centre of gravity in its extreme positions. The chapter also compares aircraft masses with both landing gears.
|
|
| |
|
|
Modification of the landing gear of the Irbis aircraft
Forman, Tomáš ; Vaněk, František (referee) ; Šplíchal, Jan (advisor)
This master thesis deals with the landing gear rebuild from tail gear to nose gear of the M-4 Irbis aircraft. The first chapter presents the aircraft in its current state and includes some technical data, too. The theoretical information about types of landing gears, its characteristics, pros and cons and the typical representatives for each type of landing gear are mentioned in the second chapter. The third chapter is about landing gear loads that occur during landing and about the load calculation according to UL 2 regulation. The following chapter shows the construction of the new landing gear, including some of the suggested, but not realised, designs. In the fifth chapter, there is a landing gear strength calculation of some of the gear components. The calculation is analytical and then uses FEM. The very last chapter then shows the effect of new landing gear on the centre of gravity in its extreme positions. The chapter also compares aircraft masses with both landing gears.
|
|
|
Reconstruction of middle part of the fuselage Z 143 aircraft using semi- monocoque frame
Zamazal, Jakub ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The thesis is focused on reconstruction of middle part of fuselage Z 143 aircraft from truss frame to semi-monocoque frame. In the thesis there is a conceptual design of semi-monocoque middle part of fuselage. The spars of centre wing section are strength controlled. In thesis there is weight analysis according to use the semi-monocoque middle part of fuselage. In second half of the thesis there is a study of retractable landing gear. The thesis shows weight savings according to use a semi-monocoque frame. The thesis also shows that semi-monocoque frame allows other option to upgrade Z 143 aircraft. This thesis can serve as a feasibility study of the reconstruction of the middle part of the fuselage Z 143 aircraft.
|
|
|
Aerodynamic design of transonic UAV glider
Kóňa, Marián ; Pejchar, Jan (referee) ; Zikmund, Pavel (advisor)
This master thesis is focused on aerodynamic design of transonic glider, which is assigned for following an airliner at cruising regime of flight. Main goal of the thesis is to determine basic geometrical design of airplane with respect to Whitcomb aera rule, mass analysis and drag polar. Weight analysis includes determining center of gravity according to longitudinal static stability margin. The drag polar of the airplane is determine for cruising regime of flight, that means the regime of following an airliner.
|
|
| |
guest ::
