|
|
Brake Pedal Design
Oravec, Peter ; Janoušek, Michal (referee) ; Ramík, Pavel (advisor)
This bachelor thesis is focused on brake pedal design of Formula Student vehicle. The first part of thesis is focused on main parts of car’s brake systems. Main goal of thesis is to determine value of pedal ratio to gain optimal operating force acting on pedal. Low weight and functionality of the pedal were important factors affecting the research. The design of pedal arm and its holder was checked by final element method and was redesigned according to results.
|
|
|
Braking System of Formula Student Vehicle
Bradáč, Jan ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
Design of braking system for Formula Student vehicle. Braking system is one of the most important control system in every vehicle, even more in race car application. Only perfectly working braking system is capable bring the best results. In this diploma thesis are list of used parts with basic force calculation, design of pedal assembly in accordance with the rules of Formula Student, options for measuring and dataloging from ride for next development.
|
|
|
Train electric traction units brakes control system
Koukolíčková, Lucie ; Vojáček, Zdeněk (referee) ; Němec, Zdeněk (advisor)
Bachelor thesis is focused on improving main operating system of the electric traction units. The main theme is stronger safety for the unit during the ride and keeping the unit movable if there is some problem with the brakes. First par of the thesis is focused on electric traction units and their brake systems. Second part is most about the new screen implementation. This screen shows, if there is some problem with the brakes and the most important part is the speed controller. It is the instrument for the safety arrival of the unit with some brake damage.
|
|
|
Formula Student Braking System
Trna, Lukáš ; Kučera, Pavel (referee) ; Blaťák, Ondřej (advisor)
Describe entire information about design of respective component in Formula (category Student) braking system is object of this thesis. Processing is divided to four main areas. The first one describes basic components in braking system, which goes on analysis of braking system in present used Formula Student Dragon 1. The second one, more spread part, consists of braking system proportioning for Formula Student Dragon 2, respecting pieces of knowledge from first generation Formula. The third part involves design single components of braking system for second generation Formula. This design is supported by measurements and results of calculations. The conclusion of master thesis involves design of caliper model and its FEM analysis.
|
|
|
Formula SAE Braking System
Brůna, Tomáš ; Vančura, Jan (referee) ; Blaťák, Ondřej (advisor)
This work is engaged in the confrontation of the existing braking system of Formula SAE project. From made confrontations is selected the best solution and make his dimension and own construct design. It is verify through analyse of tension and analyse of heat transfer.
|
|
|
Formula Student Braking System Design
Štylárek, Milan ; Hejtmánek, Petr (referee) ; Blaťák, Ondřej (advisor)
Objective of this thesis is design of brake system of new car Formula Student class – Dragon 3. This car was built by students of faculty of mechanical engineering on Brno university of technology. Brake parts selection is described as well as designing hydraulic brake line circuits optimized for stable braking behavior on tracks of Formula Student competitions. One of main parts of this thesis is design of front and rear custom brake discs with related parts. These parts are FEM analyzed. In the end the whole brake system fitted on Dragon 3 car is tested on track and its performance is analyzed too.
|
|
|
Formula Car Braking System Design
Dobrovolný, Petr ; Beran, Martin (referee) ; Ramík, Pavel (advisor)
Design of braking system for the formula student car. Calculation of basic forces acting in the braking system, including the design of hydraulic circuits. Mechanical analysis of the most important parts of the braking system and pedal assembly. Thermal analysis of the brake discs. Manufacturing and total cost calculation.
|
|
| |
|
|
Design Solutions of Recent Road Motorcycles above 500ccm
Vaculík, František ; Beran, Martin (referee) ; Ramík, Pavel (advisor)
Subject of this project is current knowledge summary in construction of road motorcycles with displacement above 500 ccm. Project is divided to particular construction units as an engine, transmission system, frame and wheels suspension, brake system, electrical equipment and other components. In each unit is an analyse of possible technical solutions, their advantages, disadvantages and materials used in production. In the conclusion of the project is comparison of three different motorcycles manufacturers and their technical solutions.
|
|
|
Conversion of Vehicle Brake System
Zavadil, Martin ; Blaťák, Ondřej (referee) ; Hejtmánek, Petr (advisor)
This diploma thesis is focused on conversion of Skoda Octavia RS mark I brake system. This vehicle will be used for race use. The aim of the thesis is to design adequate components of the brake system to achieve good brake deceleration and so that the design will be correspond to hard conditions on the race track. Thesis contains complete design of hydraulic system including control and brake forces, pressures, options of brake forces management and evaluate of brake stability. Followed by the design of brake caliper adapters and the static structural analysis by FEM. The thesis contains picture and assembly drawing attachment too.
|
guest ::
