National Repository of Grey Literature 8 records found  Search took 0.01 seconds. 
Zhodnocení obsahu těžkých kovů ve škváře vznikající při spalování komunálního odpadu
Zálešáková, Magda
Within this thesis, the content of heavy metals in bottom ash produced by ZEVO SAKO Brno, Plc was being evaluated. The content of individual heavy metals within the dry matter of the bottom ash was determined using laboratory analyzes from the years 2013 up to and including 2021. Based on static analysis using linear regression method, the trends in heavy metals content in the bottom ash were determined during the above mentioned monitored period. Based on the bottom ash‘s properties, the possibilities for bottom ash recycling and its utilization were discussed. Using a SWOT analysis, the weaknesses and strengths of utilizing the bottom ash, thus its most significant threats and opportunities were identified. This analysis resulted in an assessment of the possibility of comprehensively utilizing the bottom ash, including also bottom ash produced by ZEVO SAKO, Brno Plc.
Importance of Ageing in MSWI Bottom Ash Utilization.
Bhattarai, Sneha
The aim of this abstract is to describe in brief the phenomenon of ageing and to focus on the various changes that occur in the bottom ash matrix during this process, which makes bottom ash utilization beneficial from both ecological as well as economical point of view. Also, the effect of weathering on the trace element mobility has been researched.\n
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22019053108334 - Download fulltextPDF
Advanced Treatment Methods for Incineration Bottom Ash.
Šyc, Michal ; Baloch, T. ; Veselý, Václav ; Zuda, M.
Bottom ash is main solid residue from waste-to-energy. Recent development and trends change the approach to IBA, it is no longer regarded as unwanted waste from WtE plant but can be considered a valuable secondary source for several materials like ferrous and non-ferrous metals. Mineral residue after metal separation can be used in construction industry, e.g. as aggregates substitute for bound or unbound applications such as subbase layer for road construction. The paper summarizes results of recent activities for bottom ash utilization in WtE plant in Prague within last few years.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22019040810070 - Download fulltextPDF
The effect of bottom ash pretreatment on heavy metals leaching
Maršálková, Olga ; Šyc, Michal (advisor) ; Pohořelý, Michael (referee)
This bachelor thesis deals with the influence of bottom ash ageing on the leachability of heavy metals. The leachability tests according to ČSN EN 12457-4 and 12457-2 have been carried out with two different bottom ash granulometry and the ratio of the liquid to the solid phase. The results were compared with the classes of leachability according to the Czech legislation and a comparison of the above mentioned standards was made to the infused number of monitored elements. Keywords Leaching tests, bottom ash, leachability, combustion, waste
Characterization of Bottom Ash from Waste-to-Energy Plants.
Krausová, Aneta ; Šyc, Michal ; Pavlas, M. ; Šomplák, R. ; Kameníková, Petra
Struska ze spaloven komunálních odpadů obsahuje řadu cenných materiálů, zejména železné a neželezné kovy, které mohou být využity jako druhotná surovina. Minerální zbytek, po vytěžení cenných složek, je dále vhodné využít jako náhradu přírodních surovin ve stavebním průmyslu. V České republice je linka pro získávání neželezných kovů instalována na spalovně SAKO Brno, ostatní dvě spalovny separují pouze železný šrot. Pro posouzení využitelnosti a při rozhodovávání o aplikaci vhodné technologie pro úpravu strusky je nezbytná znalost jejích fyzikálních vlastností a materiálového složení, které je značně variabilní a závislé na složení spalovaného odpadu. Analýzou strusky z českých spaloven bylo stanoveno následující materiálové složení: 10–24 % sklo, 2–4 % keramika a porcelán, 12–17 % magnetická frakce, 1,1–4,5 železný šrot, 1,3 a 2,4 % neželezné kovy, 40–70 % reziduální frakce s částicemi pod 2 mm. Obsahy jednotlivých složek byly studovány s ohledem na granulometrii. Dále byly sledovány změny složení v závislosti na charakteru svozové oblasti spaloven a na základě získaných výsledků byl nastíněn ekonomický potenciál získávání kovů.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_22316060713500 - Download fulltextPDF
Analysis of Bottom Ash from Municipal Solid Waste Incineration Plants
Krausová, Aneta ; Šyc, Michal ; Kameníková, Petra ; Zach, Boleslav ; Pohořelý, Michael ; Svoboda, Karel ; Punčochář, Miroslav
Struska ze spalování komunálních odpadu obsahuje radu materiálu, které mohou být dále využity jako druhotné suroviny, zejména železné a neželezné kovy, nekteré vzácné kovy a kovy vzácných zemin nebo napríklad sklo. Minerální frakce je po vytežení cenných surovin, vhodnou náhradou prírodních materiálu ve stavebním prumyslu. Významným benefitem, pri zpracování strusky, je pro provozovatele spaloven také redukce poplatku za skládkování. Řada spaloven v Evropě je vybavena separačními linkami pro získávání železných a neželezných kovu. V České republice je linka pro získávání neželezných kovů instalována na spalovne SAKO Brno, ostatní dvě spalovny separují pouze snadno dostupný objemný železný šrot. Pro posouzení využitelnosti a při rozhodovávání o aplikaci vhodné technologie pro úpravu strusky je nezbytná znalost jejích fyzikálních vlastností a materiálového složení, které je značně variabilní a závislé na složení spalovaného odpadu. Analýzou strusky z českých spaloven bylo stanoveno materiálové složení.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22015111812260 - Download fulltextPDF
Characterization of MSWI Bottom Ash and Assessment of Resource Recovery Potential
Šyc, Michal ; Kameníková, Petra ; Krausová, Aneta ; Zach, Boleslav ; Pohořelý, Michael ; Svoboda, Karel ; Punčochář, Miroslav
Bottom ash from municipal solid waste incineration contains valuable components that can be recycled as secondary materials, such as ferrous and non-ferrous metals, rare earth elements, glass etc. Metal-free mineral fraction is reusable in construction industry. The composition of bottom ash is highly dependent on the composition of incinerated waste but in average can be around 5–13 % ferrous metals, 2–5 % non-ferrous metals, 15–30 % glass and ceramics, 1–5 % unburned organics and 50–70 % mineral fraction. Several incineration plants in Europe are equipped with advanced systems for metals recovery, mostly based on magnetic separation of ferrous metals and separation of non-ferrous metals usually by eddy-current separators. To study the possibilities of bottom ash treatment in the Czech Republic it is necessary to obtain data about the bottom ash composition and evaluate the potential of resource recovery.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22015112413570 - Download fulltextPDF
Recovery Potential of Bottom Ash from Municipal Solid Waste Incineration
Kameníková, Petra ; Šyc, Michal ; Krausová, A. ; Pohořelý, Michael ; Zach, Boleslav ; Svoboda, Karel ; Punčochář, Miroslav
This paper will present the composition of bottom ash determined in samples obtained from MSWI plant in Prague. The samples were first screened into fractions of grain sizes 0–2 mm, 2–4 mm, 4–6 mm, 6–8 mm, 8–10 mm, 10–15 mm, 15–20 mm and >20 mm. Each fraction, with the exception of fines bellow 2 mm, is manually sorted into glass, ceramics, magnetic particles, non-ferrous metals, unburned organics and the residual mineral fraction. It was found that the bottom ash contains in average 15–20 % of glass, 2–4 % of ceramics, 15–20 % of magnetic metals and around 2 % of non-ferrous metals. These results show that the bottom ash from in the Czech Republic is not significantly different from other European countries and has the potential for material recovery.
Fulltext: content.csg - Download fulltextPDF
Plný tet: SKMBT_C22015051109460 - Download fulltextPDF

Interested in being notified about new results for this query?
Subscribe to the RSS feed.