|
|
Residential building
Bednár, Zdenko ; Vlach, František (referee) ; Vajkay, František (advisor)
This bachelor thesis is focused on the development of project documentation for the construction of a residential building with nearly zero energy consumption. The aim of the work was to design the building disposition with an appropriately chosen structural and material solution. The residential building is designed on a plot of land located in the northern part of the city of Brno, in the borough Líšeň. The plot of land is characterized by its slightly sloping terrain. The residential building is a free standing building with a rectangular floor plan. The building has 5 floors, where one floor is a collective garage with technical equipment and the other four above-ground floors contain residential units with storage spaces. The above-ground floors consist of a total of nineteen residential units. Parking places with a total of 32, are located in the collective garage and in front of the building. The structural system of the building is designed as a transverse skeleton, supplemented by a wall system on the above-ground floors. The perimeter walls are made of acoustic lime-sand blocks, which are supplemented with mineral wool. The building will be roofed with a single layer green flat roof with extensive greenery. The appearance of the building will be formed by a neutral white plaster, which will be supplemented by anthracite plaster elements in the balcony area. The appearance of the building will be complemented by anthracite window frames, doors and tinkering products. As part of the work, assessments of heating technology, acoustics, lighting and fire safety were carried out. All requirements set by the standard were met.
|
|
|
Family house with an establishment
Andelová, Veronika ; Janda, Lukáš (referee) ; Daněk, Lukáš (advisor)
It is a detached newly built family house with an overpass in the city part of Brno, Brno Bystrc. The object is designed for housing a family of four and private operation of the beauty and hairdressing salon. The residential part is partly underground and there are also two above-ground floors. The operation consists of only one storey; Both parts are interconnected. The vertical load-bearing walls in the above-ground part are made of sandwich construction from the German manufacturer KS Kalksandstein, the base part is made of deburring fittings. Both parts are covered with a flat roof. Both floors of the residential area are made of horizontal sun breaker with distinctive slums, the sunny south facade is complemented by two small pergolas with solid lamellae. Architecturally, the exterior façade, and thus the combination of white, gray and natural brown, as well as a combination of different materials, is of interest.
|
|
|
Multipurpose facility - Brno-Bystrc, ulice Kamechy
Petráš, Vladimír ; Jelínek, Petr (referee) ; Eliáš, Luboš (advisor)
The aim of this bachelor thesis is a project of a new building of a multipurpose facility with six floors. Multipurpose facility is situated in the cadastral area Brno – Bytrc. This place is situated on the suburb of the city Brno. Multipurpose facility is free standing and it´s partially with a basement. There is one basement floor and five floors in this building. Four flats are designed for living of family of 4 members. The next two maisonettes are designed for six people. There is a coffee–bar and a garage with a six parking places. In the maisonettes there is a green roof on the roof of a four floor of this building, which is designed for a terrace. The roofs of this building is designed as a flat roofs. The building has a brick blocks construction. The facade of building is insualted by direct external insulation system. Documentation of the bachelor thesis is prepared for the building contruction. The graphical part of documentation has been processed in the Autodesk Autocad software.
|
|
|
Family house with an establishment
Mošaťová, Kristína ; Berousková, Dana (referee) ; Daněk, Lukáš (advisor)
This bachelor´s thesis deals with design documentation of the family house with an establishment. Family house is designed for a four person family living. The house is situated in the Nitra region, in the territory of the municipality Belince, located on the parcel 248/19. The building is designed as a brick construction with ISOVER insulation system. The vertical and horizontal load bearing constructions are designed of system YTONG. Family house is covered with a gable roof with inclination of 25°. The construction of the sloping roof is made of wooden components forming the construction framework. The building has two floors. In the first floor there is situated the day part of family house and in extented part, on the front side of the house, is part of establishment.. In the second floor there is the night part of family house – the rooms for the privateuse of the owners.
|
|
|
Residential Complex in Brno - Komín
Ertl, Jakub ; Čelikovský, Martin (referee) ; Makovský, Zdeněk (advisor)
Urban Risen Solution parcel located on the street Pasture in the city of Brno chimney. The property is located on the edge of the city district and directly continues the surrounding forest, which is on the east side. The plot is an avenue of chestnut trees that proposal preserves intact. Oklí are good amenities. In its narrowest surroundings there are elementary school and kindergarten with their priľahlími Sports and satellites family townhouses on the south side of the property. After the eastern and northern boundary leads IMPORTANT relaxing walking routes on which the proposal responds through-beds, and a "restoration" of pastures, which once was located here. Land would extend that oľúbenú Walking and served by community residents as well as the city of the chimney. The project also own community náveznosťou room with a plate of street furniture. Architectural design Material objects based on the elongated shape of the land and is divided into three apartment buildings. Distributes land to the "street" and the "grazing". The volume responds to building orientation sides are angled wings housing the south and west. All the apartments are so perfect sunlit and overlook the "pasture". On the north side of the building they are arranged in the form of communication zasklennej galleries. The porch with loggias flats made up of separate steel structure, which forms the form of these apartment buildings. The main module becomes one living room, ensuring good housing variability. The building is located only forty apartments of sizes 1 + kk to 5 + kk apartment with terrace. Parking is in the combined form of overhead and underground parking. Building Solutions The building is designed as a reinforced concrete skeleton with dimensions of 8600 mm x 6600 mm with stiffening communication core. The shell is insulated with thermal insulation with a thickness of 200 mm. Area building openings is minimized on the north facade and vice versa is open to south and west facades, which benefits the passive energy gain. These construction holes are filled with high quality aluminum windows and doors with Triple glazing. On the frame is attached a separate steel construction porches and balcony. This concept allows a perfect insulation shell fired by a separate steel structures unheated porch and balcony, and hence a considerable degree of energy efficiency.
|
|
|
Detached house with lawyer's office
Prosnanová, Dominika ; Julinová, Patricie (referee) ; Bečkovský, David (advisor)
The goal of this bachelor’s thesis is to project a detached house with a lawyer’s office. It consists of two separate buildings. The detached house has two floors above the ground level and a basement. The lawyer’s office is projected as a single floor building with a barrier free access. Both buildings‘ construction systems are made out of limestone-sand blocks. The ceilings are monolithic and made out of reinforced concrete. The roof is flat on both buildings and weighted down by river aggregate.
|
|
|
Block of Flats
Vlado, Roman ; Burdová, Jana (referee) ; Lavický, Miloš (advisor)
The aim of the thesis is new-building design of flat-building in cadastral area of community Čachtice. Building is situated at free estate in the middle of community. Building estate must have new feeder road built. In front of building will be the parking area. The flat-building is detached and four-storied building which has two detached entrance. At first floor is situated office space including kitchen, WC, entrance hall and big office. Remaining floors have six flats. Each flat has 3 rooms and is meant for family of four. Flat includes separate WC, bathroom and engineering room. Each flat has two balcony orientated to east and west. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. For each flat is reserved storeroom at first floor. In the storeroom is PVC floor. In building is a lift. Flat-building has flat roof. Foundations are from bulk concrete. Project is set up with system POROTHERM. Building has heat cladding. At the building are plastic window and colour is matching with facade. Foothpaths around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.
|
|
| |
|
|
Wooden familly house
Kotianová, Miriama ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The main aim of this bachelor´s thesis is a design of documentation for construction of the object of family house, which is situated on a hillside, in the village caled Jalovec. This is a doubledeck object with a garage located in the basement, which is designed as a columnar structural system. The project is devised in order to fit in to the neighborhood. The documentation is prepared in accordance with current Czech legislative a standards. The thesis is devided to graphical part and text part.
|
|
| |
guest ::
