|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Computer-Generated Music
Mederly, Peter ; Grézl, František (referee) ; Fapšo, Michal (advisor)
The main goal of this thesis is the analysis, design and implementation of a new system, which would be able to generate music in real-time, based on terrain data or any raster image. The thesis deals with history of development of various attempts to formalize musical composition and presents contemporary approaches to its algorithmic creation. Technique of constraint programming is explored as well, because it is suitable also for automatic composition, and it is a part of implemented solution. Application components (interface, generator, music core and sound unit) and their interactions are examined in more detail. All approaches used for generating music are described in depth and, moreover, they are supported by many pictures and practical examples. Musical outputs are tested and results of these tests outline strengths, weaknesses and also inner possibilities of the designed system. Conclusion summarises author's contribution to the field of computer generated music and reveals possible prospects for application usage and its extensions.
|
|
| |
|
|
Jaroslavice – place in the landscape
Šmejkal, Jiří ; Galeová, Nicol (referee) ; Ponešová, Barbora (advisor)
The theme of this diploma thesis is the architectural study of the complex of the Farm of 3D Printers in Jaroslavice. The technology of 3D printing at its speed of development has far outweighed the response to its needs. It lacks a new systematically planned building typology corresponding to the requirements of farms. Farms adapt to the spaces. The main aim of the work is to introduce the possibility of turning the situation and adapting the premises to the farms. The thesis follows the urban design of the restructuring of the Jaroslavice landscape elaborated in the previous semester. The project respects established principles at microregion level in the form of emphasis on self-sufficiency, population integrity or the use of current technologies. The land is located on the southern part of Jaroslavice. There are 3 agricultural buildings located on the property, which until 2010, when a photovoltaic power plant was built, operated in conjunction with a neighboring agricultural court. After the power plant was built, the bonds were irreversibly broken. Buildings are in a very poor condition and mutual cooperation no longer works. The existing solution replaces and shows the possibility of using solar energy in a different way. Thus, the construction cartridge works with a hybrid typology where the 3D production area is combined with the maximum solar gains of the photovoltaic panels. Generative methods have been used to design dominantly either for finding a form in terms of achieving maximum solar gains or after verifying the efficiency of the structure. The proposal has several scenarios of possible development. There are four different stages of growth and the linkage of production areas. Printers are able to replicate themselves at such a rate that they can expect rapid growth. The proposal uses controlled growth methods to simulate complex development under the conditions of maximum solar radiation. Visual distraction and overheating are also solved by atypical sunsets on the exterior façade. Thin-film photovoltaic panels are used on the sun, so it is able to produce electricity besides the shield. The energy-efficient shape along with the great advantage of the layout solution, instead of the corridor disposition, is a basic cell on the central plan view. This makes it possible to control and operate more of the machines more efficiently. The production site forwards counts full robot automation.
|
|
|
Computer-Generated Music
Mederly, Peter ; Grézl, František (referee) ; Fapšo, Michal (advisor)
The main goal of this thesis is the analysis, design and implementation of a new system, which would be able to generate music in real-time, based on terrain data or any raster image. The thesis deals with history of development of various attempts to formalize musical composition and presents contemporary approaches to its algorithmic creation. Technique of constraint programming is explored as well, because it is suitable also for automatic composition, and it is a part of implemented solution. Application components (interface, generator, music core and sound unit) and their interactions are examined in more detail. All approaches used for generating music are described in depth and, moreover, they are supported by many pictures and practical examples. Musical outputs are tested and results of these tests outline strengths, weaknesses and also inner possibilities of the designed system. Conclusion summarises author's contribution to the field of computer generated music and reveals possible prospects for application usage and its extensions.
|
guest ::
