|
|
Standard baffle - laboratory device
Hodinka, Tomáš ; Říha, Kamil (referee) ; Balík, Miroslav (advisor)
The purpose of this project is the design and the construction of a laboratory preparation for loudspeaker measurements, a standard baffle. Standard baffle is a rectangular panel with a loudspeaker placed eccentrically. Measurements with this baffle are then done in an anechoic chamber. The main purpose of a standard baffle is the ability to measure loudspeakers without the effect, that is caused by the pressure properties of a closed baffle and without an acoustic short circuit. The standard baffle is designed, so that it is self-supporting, transferable by 2 people, easy to be stored, modular and able to support loudspeakers that are up to 12 inches in diameter. The designed baffle is detachable into 3 parts. The base, the panel, and the inserts. The base is a big, heavy board with a key on the upper side. This key fits into a key groove in the panel and that allows the two parts to assemble. The plane is made of four layers of different types of plywood. That allows the design to make a compromise between the toughness and weight. The inserts are designed, so that the replacement and manipulation of loudspeakers during measurement are as past and as simple as possible. During measurement the loudspeakers are mounted in their respective inserts, which can be mounted and dismounted from the standard baffle without any tools. The test measurements demonstrated that the standard baffle is unsuitable for reference measurements. Resonance of the plane, reflections from the base, refractions from the outer edges of the baffle and potentially different causes unduly distort the results of measurements. These distortions are displayed with a considerable consistency even between different loudspeakers. This indicates that these distortions could be filtered oud by, for example, using a specialized software.
|
|
|
Standard baffle - laboratory device
Hodinka, Tomáš ; Říha, Kamil (referee) ; Balík, Miroslav (advisor)
The purpose of this project is the design and the construction of a laboratory preparation for loudspeaker measurements, a standard baffle. Standard baffle is a rectangular panel with a loudspeaker placed eccentrically. Measurements with this baffle are then done in an anechoic chamber. The main purpose of a standard baffle is the ability to measure loudspeakers without the effect, that is caused by the pressure properties of a closed baffle and without an acoustic short circuit. The standard baffle is designed, so that it is self-supporting, transferable by 2 people, easy to be stored, modular and able to support loudspeakers that are up to 12 inches in diameter. The designed baffle is detachable into 3 parts. The base, the panel, and the inserts. The base is a big, heavy board with a key on the upper side. This key fits into a key groove in the panel and that allows the two parts to assemble. The plane is made of four layers of different types of plywood. That allows the design to make a compromise between the toughness and weight. The inserts are designed, so that the replacement and manipulation of loudspeakers during measurement are as past and as simple as possible. During measurement the loudspeakers are mounted in their respective inserts, which can be mounted and dismounted from the standard baffle without any tools. The test measurements demonstrated that the standard baffle is unsuitable for reference measurements. Resonance of the plane, reflections from the base, refractions from the outer edges of the baffle and potentially different causes unduly distort the results of measurements. These distortions are displayed with a considerable consistency even between different loudspeakers. This indicates that these distortions could be filtered oud by, for example, using a specialized software.
|
guest ::
