|
|
Exotarium
Přítulová, Anna ; Wittmann, Maxmilian (referee) ; Šindlar, Jiljí (advisor)
The topic of the bachelor thesis is the Exotárium pavilion in the Brno ZOO, which supposed to replace the existing building, which no longer meets the spatial, hygienic or technical requirements. The building is located in the center of the ZOO area at the intersection of several visitor routes. Conceptually, the design is divided into two buildings – the tropics pavilion dedicated to Papua New Guinea and pavilion of inland Australia. These two buildings are connected on the underground level by a technical floor. Areas for animals are adapted for the breeding of exotic birds, small mammals and fish. The pavilion is divided longitudinally into three tracts – technical and hygienic facilities, corridors for visitors and indoor aviaries. The building is equipped both for the preparation of feed and the care of animal health, as well as for the rearing of young. In the center of the layout is the central space for visitors and the Water world. The extended area of the corridor is equipped with furniture and presentation equipment, which can also be used for lectures and events for schools. The dominant element of the space for visitors is the acoustic ceiling consisting of prisms of different lengths of green wood wool. This ceiling is intended to create the impression of a canopy of a tropical forest. The curved wall between the aviaries and the corridor is intended to offer unconventional views into the aviaries, but still provide the animals with sufficient privacy. The building is serviced through a staff entrance on the south-east side of the building and the technical facilities are accessible via an unpaved road on the underground level from the south-west slope below the Australia pavilion building. This route is only used to transport the technological equipment of the building. The building, with its predominantly gray and contrasting interior, corresponds with the Australia pavilion, where more earthy colors are used. The buildings are united mainly by the facade and are connected by the construction of through external aviaries.
|
|
|
Boarding house Pamferova Huť
Trojáková, Michaela ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an
|
|
|
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
|
|
|
Boarding house Pamferova Huť
Trojáková, Michaela ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This diploma thesis describes the design and processing of project documentation pension. The proposed facility is located in the village of Železná Ruda- Pamferova Hut. The site is widely used by tourists in winter and summer. This is partly basement building, which has 2 storeys and an attic. The roof is designed as a gabled dormer with a flat roof. The building is based on the footings of plain concrete and under the reinforced concrete pillars are designed shoe. Supporting, peripheral and partition walls are designed from sand-lime bricks SENDWIX. An exception is peripheral walls of the basement, which is in contact with soil, which is designed as a lost formwork. In the dining area, which has an open reinforced concrete columns. Ceiling structure will consist of prestressed ceiling panels SPIROLL. Perimeter walls are insulated using external thermal insulation composite system using insulation from stone wool. The building is functionally divided into three main parts with a common main entrance. The first part is a restaurant with a kitchen, storage and kitchen facilities. This section is designed restaurants with a total capacity of 26 persons, the capacity will be in the summer to expand the possible capacity of the terrace, which belongs to the dining room. It is also proposed sanitary facilities for visitors to the restaurant, kitchen with storage and facilities for staff. The second part is the wellness center, which consists of a gym and rooms with infrared sauna and whirlpool. This section is designed sanitary facilities for visitors separated for men and women. The last part of the pension, which used to accommodate 30 people and the background of the pension. Backgrounds pension means any technical equipment room, storage room for bikes and skis, and not least the individual room house, which also includes a room for personal hygiene. This thesis was created with an emphasis on a correct layout and architectural design, static requirements an
|
|
|
Sports centre Polička
Svoboda, Jan ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.
|
guest ::
