|
|
steam boiler for woody biomass 88t/h
Lučko, Martin ; Ing.Milan Ryšavý (referee) ; Skála, Zdeněk (advisor)
The aim of the work is to design a plain wood combustion boiler of 88 t/h output. Fuelling component analysis has been added to the basic boiler parameters. For given fuel is prepared stechiometric calculations. After making the heat balance of boiler is determined the thermal efficiency. For given output of steam parametrs (temparature, pressure, volume) are designed individual convective surfaces and dimensons of the boiler. It is also made drawings.
|
|
|
Grate Boiler for Coal and Bagasse Combustion - 200 t/h, 9.3 MPa, 520 °C
Bartůněk, David ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
The object of the thesis is to design a grate boiler for bagasse and brown coal combustion with a heat output of 160 MW. Calculations of a flue gas stoichiometry are based on known element analyses of each fuel. The crucial part of the thesis includes designs of heat-exchanging surfaces, where the bagasse is considered as the main fuel while the brown coal is the spare one. Overall thermal balance and an actual boiler efficiencies are provided in last chapters. The boiler-outlet flue gas temperature is compared with the dew point temperature at the very end of the thesis. As a part of the thesis there is a design of the boiler attached.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Boiler for Brown Coal Combustion
Pavlo, Matej ; Hoffman, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
|
|
|
Grate Boiler for Biomass and Coal Co-combustion
Baláži, Martin ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.
|
|
|
Design of Steam Boiler
Kadlec, Tomáš ; Nechvátal, Ondřej (referee) ; Skála, Zdeněk (advisor)
This thesis is focused on design of black coal combustion boiler of 160t/h output. It consists of several parts. First, stechiometric calculations and enthalpy of air and gas are made, then heat balance of boiler and the boiler losses are calculated, and also thermal efficiency is determined. In next step, the combustion chamber is designed and its thermal calculation is made. Then, each of heating surfaces are designed, and in the last step overall energy balance of the boiler is checked. The scheme of pressure system and design documentation added.
|
|
|
Grate Boiler for Biomass Combustion
Szabó, Gergely ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
The thesis deals with the design of a grate steam boiler which has natural circulation and is determined for combustion of wood chips. The boiler has a capacity of 45 t/h and produces superheated steam with the output parameters of 3,5 MPa and 450 °C at the 125 °C feed water temperature. Stoichiometric calculations and the flue gases enthalpy calculations are based on the composition of the specified fuel. The efficiency and fuel consumption of the boiler is also determined. The thesis mainly focuses on the thermal calculation and geometric design of the individual heat transfer surfaces of the boiler. The drawing documentation of the steam boiler is available in the attachment of the thesis.
|
|
|
Gas Boiler for Blast Furnace and Coke Gas Mixture Combustion
Dohnal, Jakub ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the constructional and calculation design of boiler for blast furnace and coke gas mixture combustion, including sizing of the heating surfaces. The opening section is dedicated to a brief characterization of burned fuels. The following chapter shows the parameters and composition of the resulting fuel mixture. The main part of this thesis involves; determining the stoichiometric amount air required for combustion and the resulting flue gas, determining the boiler efficiency and steam production rate, calculations regarding the combustion chamber and the detailed design of the individual heat exchangers. At the end of the thesis the heat balance of the entire boiler is verified. Drawing documentation of boiler is also part of this diploma thesis.
|
|
|
Steam gas boiler design
David, Josef ; Bursa, Robert (referee) ; Baláš, Marek (advisor)
The diploma thesis deals with the design of a steam gas boiler with a steam output of 50 t/h. The required steam output parameters are a temperature of 425 °C and a pressure of 3,6 MPa. After a short theoretical introduction, combustion stoichiometry is performed. Subsequently, the dew point, boiler efficiency and the amount of fuel supplied to the boiler are calculated. On the basis of further thermal calculations, a dimensional design of the combustion chamber and other heat exchange surfaces is created. The proposed drum boiler consists of three strokes. At the end of the work, control calculations are performed. A design drawing of the boiler is created from the resulting parameters.
|
guest ::
