|
|
The effect of optical fiber attenuation on the capacity of optical traces
Žák, Ondřej ; Škorpil, Vladislav (referee) ; Reichert, Pavel (advisor)
The essence of this thesis is the creation of complex insight on optic fibre attenuation. There is successive steps explained mechanism of optical attenuation and characterized its spectral dependence. We are describing primary elements of optical attenuation, its sorts and their own spectral dependence. Bachelor´s thesis is explaining requirements of transmission system to spectral characteristic optic fibre and influence of optic fibre attenuation on capacity of optical trace. Output of bachelor´s thesis is program solution of designed mathematical model for calcula-tion spectral dependence of optical attenuation. Program is realized in MATLAB and there is furthermore added version in Microsoft Office 1997-2003. Created program is able to ap-proximate points data obtained from measurement of optic fibre by using Lagrange interpola-tion polynomial and Rayleigh scatter interlay.
|
|
|
Design of optoelectronic sensor for biological tissues
Balík, Zdeněk ; Bartlová, Milada (referee) ; Tománek, Pavel (advisor)
Biological tissues are optically inhomogeneous and absorbent materials. They are comprised of various structures such as cells, cell organelles, and various fiber structures. Due to these structures leads to different interactions with the light and phenomena such as absorption, scattering and polarization of light. Different ultrasonic, electromagnetic, electrical and optical methods are used for meat ageing detection. Muscles are turbid anisotropic media, they exhibit changes in electrical and optical properties according to the direction of the electrical and optical fields in the sample. The diploma work assesses the feasibility of impedance measurements for meat ageing detection and their comparison with optical measurement of scattered polarized light. Two different sample were used: pork chop slices and chicken breasts were used for their relative homogeneity. The electrical method is a promising method due to the possibility of getting much information and realizing cheap and fast enough measurement systems. The proposed optical method allows measure the rotation of polarization plane with meat ageing in the range of 95 degrees within considered period. Through the first promising results obtained in this thesis, a further work has to be provided to determine closer relationship between optical scattering characteristics, electrical anisotropy in ageing-related tissue structural properties.
|
|
|
Free-Space Optics data link
Šála, Jakub ; Číž, Radim (referee) ; Šporik, Jan (advisor)
In this thesis, shows a current issue for free space optics, limiting their use in practice with regard to the availability and reliability. They conducted measurements on wireless optical links and the observed values is calculated by the availability of the connection. Subsequently, measurements are performed on alternate versions of wireless and copper connections. Observed values were compared with a wireless optical link. It is made of optical design of wireless connections at home.
|
|
|
Development of a Fluid Curtain for Gaseous Exhalations Absorption
Krištof, Ondřej ; Fekete, Roman (referee) ; Lapčík,, Lubomír (referee) ; Svěrák, Tomáš (advisor)
The dissertation thesis deals with the application of absorption methods for the separation of gaseous pollutants from polluted gaseous mixtures using a pilot plant scrubber. The efficiency of the gaseous pollutant removal was determined based on the hydrodynamic distribution of fluids inside the spray chamber. A TF-28 150 spiral nozzle, which was used to spray the absorption liquid, was experimentally characterized. Specifically, the pressure impact pattern of the liquid produced by the nozzle was investigated using intrusive methods and the effective spray angles, the modes of primary and secondary atomization, the droplet size and liquid velocity distributions were determined using non-intrusive optical methods. Numerical simulations of flow of model gas phase inside the sprinkler head and spraying of the liquid through the spiral nozzle were also carried out. The obtained data can be applied to estimate the interface area and together with the determination of the coefficient of total mass transfer thus define the kinetics of chemisorption for a given absorbent/absorbate combination.
|
|
|
Biogas cleaning to substitute natural gas quality
Němec, Jan ; Niesner, Jakub (referee) ; Dvořák, Radek (advisor)
This work deals with methods of biogas cleaning to natural gas quality for further use. The introduction is focused on technologies for biogas treatment and biogas management for current situation in the Czech Republic. In the main chapter there is a water scrubber technology design and calculation of the absorption column for the conditions given. A simulation model and preliminary economic balance were then developed on the obtained data.
|
|
|
Simulation of dose distribution irradiation
Večeřa, Petr ; Hlaváč, Martin (referee) ; Kolářová, Jana (advisor)
This project deals with the issue of simulation of dose irradiation. This principle is used in a radiotherapeutic device known as a Leksell Gamma Knife for the treatment of intracranial tumours. With regard to the theoretical observations obtained by studying this device, the project suggests the use of analytical geometry for the creation of a mathematical model for calculation of the intensity in the rayed area. A demonstration program Leksell_xvecer08 has been created for this model in a MatLab software background, which enables the user to change various input arguments and simulate a picture of the dosage spread in the target scanned areas.
|
|
|
Utilization of absorption systems in the heating systems
Vidlák, David ; Špiláček, Michal (referee) ; Pospíšil, Jiří (advisor)
Main goal of this work is familiarization with basic features of absorption heat pumps and it’s growing importance on the market. In the first part of the work there is a research for clarifying facts associated with such pumps. In the introduction there are descriptions of basic information from the field of heating industry and its connections to our systems. Next there is a brief analysis of price changes in electricity and heat in the last five years. Main part of the analytical section is a description of the used absorption system. Second part of the work is focused on the calculation of the absorption system itself. First there is calculated internal and external part of the device according to the parameters from GE Power s.r.o. After this step there are parametric studies based on changes of key parameters of the default device for a demonstration of the behavior of a heating pump. In the end of the work there is a integration of the unit into the heating cycle for variations including flue gas condenser and using a cooling water from the turbine condenser.
|
|
|
Analytical methods applied for the evaluation of environmental contamination by uranium ore mining
Bílek, Jiří ; Holubová, Zuzana (referee) ; Čáslavský, Josef (advisor)
This thesis deals with the testing procedures used in monitoring of environmental contamination after uranium ore mining in the uranium mine in Dolní Rožínka. It deals with the determination of radioactive elements radium, uranium and radon. The methods used for the determination of radioactive elements in mine laboratory in Dolní Rožínka are described. The thesis also mentions other applicable methods for determination of uranium. The metods of determination of manganese, iron and other metallic elements are also summarized in brief.The values of concentrations of monitored analytes in selected locations are presented at the end of the thesis. These values, which were provided by laboratories in Dolní Rožínka, are valid for 2010.
|
|
| |
|
| |
guest ::
