|
|
Quality monitoring and testing optimization at line AKD
Kuruc, Lukáš ; Hrušková, Veronika (referee) ; Polsterová, Helena (advisor)
This diploma thesis deals with issue of quality monitoring and final product testing at the AKD line. Output of this thesis is calculation of testing time optimization by Weibull distribution. In the beginning reader is familiar with AKD device, what quality management is and ways how to test final products in electrotechnical manufacturing. Main goal of this thesis is to describe differences between testing methods and optimize Burn-In testing method.
|
|
|
Reliability of Lead-free Solders and the Selected Methods to Estimate its Lifetime
Švecová, Olga ; Kolařík, Vladimír (referee) ; Urbánek,, Jan (referee) ; Šandera, Josef (advisor)
The doctoral thesis is focused on reliability of lead-free solder SAC 305. Knowledge in the field of fatigue models used in determining the lifetime of solder joints are observed in this thesis. Also such methods of predicting reliability as numerically-analytical methods or reliability experimental tests are mentioned. Practical results of reliability measurement are presented. Experimental data served as the foundation for determining empirical coefficients for the fatigue model based on deformation induced by creep of the solder, which was implemented in the ANSYS environment. Results from different methods were compared and conclusions discussing the suitability of the presented prediction methods are formulated.
|
|
|
Failure probability of the ceramics part using Weibull weakest link theory
Kovář, Jaroslav ; Návrat, Tomáš (referee) ; Fuis, Vladimír (advisor)
This thesis compares Weibull weakest link theory with inclusion of one and all three principal stresses. Principal stresses needed for this theory were calculated with finite element method. The informational research is in the introduction of this thesis. It includes ceramic materials, Weibull weakest link theory, Gaussian quadrature over spherical surface and ceramic head of hip joint endoprothesis. Theoretical part is used for next calculations of probability of failure. The probability of failure of ceramic rod loaded by four-point bending is calculated in first calculations. This task is solved as contact in the next step. Next part of this thesis is about selection of suitable method of numerical integration. This method will be used in the calculation with all three principal stresses. The results of calculation with all three principal stresses are compared with the results of the calculation which includes only first principal stress. Firstly, this is done for cylindrical body and then used on head of hip joint endoprothesis. In the last part of this thesis, probability of fracture of head hip joint endoprothesis with shape deviation of nominal conicity is calculated.
|
|
|
Model with Weibull responses
Konečná, Tereza ; Karpíšek, Zdeněk (referee) ; Hübnerová, Zuzana (advisor)
Tato diplomová práce se zabývá Weibullovými modely, přesněji dvouparametrickým Weibullovým rozdělením. Práce se zabývá odhady parametrů, a to čtyřmi variantami kvantilové metody, metodou maximální věrohodnosti a grafickou metodou Weibullova pravděpodobnostního grafu. Je uvedeno odvození odhadu parametrů pro jednovýběrovou analýzu rozptylu pro Weibullovo rozdělení. Jsou zde odvozeny vztahy pro model s konstantním parametrem alfa, s konstantním parametrem beta a s oběma konstantními parametry. Také jsou uvedeny testové statistiky pro rušivé parametry - skórový test, Waldův test a test založený na věrohodnostním poměru. V poslední kapitole je provedena aplikace jednotlivých představených metod. Srovnání metod je ukázáno pomocí grafů, histogramů a tabulek. Metody jsou naprogramovány v~softwaru R. Jejich funkčnost a vlastnosti jsme ověřili na dvou simulovaných souborech dat. Diplomová práce je zakončena příkladem tří simulovaných náhodných výběrů, na kterých byla provedena analýza pomocí zavedených metod.
|
|
|
Aerodynamic design of wind turbine
Žabka, Marek ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This Master’s thesis focuses on the wind turbines. It describes the basic attributes of the wind energy and the wind potential of Slovak Republic, as well as the environmental impact of this sector. Meteorological data for the selected location are processed according to the Weibull distribution and they are used for the aerodynamic design of the wind turbine blades. Aerodynamic design is processed by using two methods. The first is the blade cascade theory, which is used to design prismatic and twist blades. The second method is called the blade element momentum, which is used to design wind turbine but only twist blades are designed by using this theory. Calculated aerodynamic shapes are compared and the best economic solution for the selected location is chosen.
|
|
|
Aerodynamic design of wind turbine
Chromec, Tomáš ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This master‘s thesis focuses on wind turbines. The first part describes the basic attributes of wind energy and wind turbines and is accompanied by a many images. The next section is a statistical processing of measured meteorological data from measuring stations of the Czech Hydrometeorological Institute. These data are then used for calculations of the blades of wind turbines. The calculations are carried by two different methods. The first method is called the blade element momentum theory, the second method is the theory of blade cascade. Using these methods are obtained by two different blades. The last section compares the two blades in terms of geometric and performance.
|
|
|
Wind action on high-rise buildings
Damek, Marek ; Eliáš, Jan (referee) ; Nevařil, Aleš (advisor)
This thesis is focusing on comparison two approaches wind actions on high rise buildings. Determinist approach will consider by norm ČSN EN 1991-1-4. Stochastic approach by real wind speeds and synthetic generate wind speeds. Wind as a random value, variable on time and height. Model of water tower will use for the comparison.
|
|
|
Failure probability of the ceramics part using Weibull weakest link theory
Kovář, Jaroslav ; Návrat, Tomáš (referee) ; Fuis, Vladimír (advisor)
This thesis compares Weibull weakest link theory with inclusion of one and all three principal stresses. Principal stresses needed for this theory were calculated with finite element method. The informational research is in the introduction of this thesis. It includes ceramic materials, Weibull weakest link theory, Gaussian quadrature over spherical surface and ceramic head of hip joint endoprothesis. Theoretical part is used for next calculations of probability of failure. The probability of failure of ceramic rod loaded by four-point bending is calculated in first calculations. This task is solved as contact in the next step. Next part of this thesis is about selection of suitable method of numerical integration. This method will be used in the calculation with all three principal stresses. The results of calculation with all three principal stresses are compared with the results of the calculation which includes only first principal stress. Firstly, this is done for cylindrical body and then used on head of hip joint endoprothesis. In the last part of this thesis, probability of fracture of head hip joint endoprothesis with shape deviation of nominal conicity is calculated.
|
|
|
Aerodynamic design of wind turbine
Žabka, Marek ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This Master’s thesis focuses on the wind turbines. It describes the basic attributes of the wind energy and the wind potential of Slovak Republic, as well as the environmental impact of this sector. Meteorological data for the selected location are processed according to the Weibull distribution and they are used for the aerodynamic design of the wind turbine blades. Aerodynamic design is processed by using two methods. The first is the blade cascade theory, which is used to design prismatic and twist blades. The second method is called the blade element momentum, which is used to design wind turbine but only twist blades are designed by using this theory. Calculated aerodynamic shapes are compared and the best economic solution for the selected location is chosen.
|
|
|
Model with Weibull responses
Konečná, Tereza ; Karpíšek, Zdeněk (referee) ; Hübnerová, Zuzana (advisor)
Tato diplomová práce se zabývá Weibullovými modely, přesněji dvouparametrickým Weibullovým rozdělením. Práce se zabývá odhady parametrů, a to čtyřmi variantami kvantilové metody, metodou maximální věrohodnosti a grafickou metodou Weibullova pravděpodobnostního grafu. Je uvedeno odvození odhadu parametrů pro jednovýběrovou analýzu rozptylu pro Weibullovo rozdělení. Jsou zde odvozeny vztahy pro model s konstantním parametrem alfa, s konstantním parametrem beta a s oběma konstantními parametry. Také jsou uvedeny testové statistiky pro rušivé parametry - skórový test, Waldův test a test založený na věrohodnostním poměru. V poslední kapitole je provedena aplikace jednotlivých představených metod. Srovnání metod je ukázáno pomocí grafů, histogramů a tabulek. Metody jsou naprogramovány v~softwaru R. Jejich funkčnost a vlastnosti jsme ověřili na dvou simulovaných souborech dat. Diplomová práce je zakončena příkladem tří simulovaných náhodných výběrů, na kterých byla provedena analýza pomocí zavedených metod.
|
guest ::
