National Repository of Grey Literature 12 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
Schedulability Analysis of Real-Time Tasks under Uncertainty
Čus, Samuel ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
The goal of this bachelor’s thesis is to familiarize with real-time systems, uncertainties and scheduling mechanisms related to these systems, statistical model checking, as well as the design and implementation of an approach to schedulability analysis under uncertainties, creating suitable sets of real-time tasks, and verifying their schedulability using the approach. I have mainly incorporated uncertainties caused by system interruptions and undeterministic task parameters. To address the given problem, I created a set of tasks, incorporated uncertainties into the system, and analyzed the schedulability of the tasks. The system modeling and analysis were conducted using the UPPAAL SMC tool, and, for comparison, also using the Cheddar tool with selected sets of tasks.
Measurement problem of low AC voltage
Balázs, Ladislav ; Jakubík,, Petr (referee) ; Havlíková, Marie (advisor)
The thesis deals with a problems of measuring small alternating voltage. The aim of the thesis is to explain in general problems of influences on measurement of small alternating voltage and to carry out a concrete measurement according to instructions of CMI. In the next part the thesis deals with the problems of uncertainties for measurement of small AC voltage and a concrete calculation of uncertainties has been made for measurement made in the first part of this thesis.
Accuracy of Indirect Measurement
Urbánek, Zdeněk ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
This bachelor's thesis survey on frame indirect measurement and philosophy analyses uncertainties. Part of is as well simple model, approximating choice characteristic case for needs education.
Flow Measurement - oriffice plates
Krátká, Lucie ; Málek, Petr (referee) ; Šedivá, Soňa (advisor)
The aim of the Bachelor thesis is to approximate the fluid flow measurement using differential pressure transducers inserted into fully filled circular cross-section conduits running full in the industrial sector. The introduction of the Bachelor thesis describes and explains the principle of fluid flow measurement using differential pressure transducers and the basic types of primary flow elements. Practical part consists of the design of practical calculations of individual parameters of standardized orifice plates, the design of a program for calculation of these parameters, comparing the achieved results with the output from the program Conval, evaluating these results and analyzing the measurement uncertainties for the parameters that affect the design of the standard orifice plate.
Automation of Noise Measurements Using XL2 Sounl Level Meter
Švihálek, Filip ; Číž, Radim (referee) ; Schimmel, Jiří (advisor)
This bachelor´s thesis focuses on noise measurement, characterizes used quantities and uncertainties due to the measument of these quantities. The goal is to develop application, which will automate measurement with sound level meter XL2. Automation will use text output of the XL2 and modul for Remote Measurement. Application is developed in development environment Visual Basic for Applications.
Impact of Hydrologic and Operational Uncertainties on Complex Water Management Analysis of Open Water Reservoir
Havlík, Martin ; Fína, David (referee) ; Marton, Daniel (advisor)
Theme of the work is a water management analysis of the Hanušovice reservoir on the river Morava/Krupá. In the framework will be make to calculating of the active capacity and retention capacity thinking reservoir. Software HYDROG and UNCE_RESERVOIR will be used, which calculating analysis reservoir. Target of the work is analysis impact uncertainties to active and retention capacity of reservoir, which is conduction on actually hydrologic conditions in river basin a actual lay requisition national company Povodí Moravy.
Flow Measurement - oriffice plates
Krátká, Lucie ; Málek, Petr (referee) ; Šedivá, Soňa (advisor)
The aim of the Bachelor thesis is to approximate the fluid flow measurement using differential pressure transducers inserted into fully filled circular cross-section conduits running full in the industrial sector. The introduction of the Bachelor thesis describes and explains the principle of fluid flow measurement using differential pressure transducers and the basic types of primary flow elements. Practical part consists of the design of practical calculations of individual parameters of standardized orifice plates, the design of a program for calculation of these parameters, comparing the achieved results with the output from the program Conval, evaluating these results and analyzing the measurement uncertainties for the parameters that affect the design of the standard orifice plate.
Impact of Hydrologic and Operational Uncertainties on Complex Water Management Analysis of Open Water Reservoir
Havlík, Martin ; Fína, David (referee) ; Marton, Daniel (advisor)
Theme of the work is a water management analysis of the Hanušovice reservoir on the river Morava/Krupá. In the framework will be make to calculating of the active capacity and retention capacity thinking reservoir. Software HYDROG and UNCE_RESERVOIR will be used, which calculating analysis reservoir. Target of the work is analysis impact uncertainties to active and retention capacity of reservoir, which is conduction on actually hydrologic conditions in river basin a actual lay requisition national company Povodí Moravy.
Ohodnocení Risků Mezinárodních Obchodních Kontraktů na Trhu Alkoholických nápojů
Osadchenko, Igor ; Halík, Jaroslav (advisor) ; Štěrbová, Ludmila (referee)
The aim of my thesis was to analyze and identify main types of risks and uncertainties, which can be faced by international companies. I also described main ways and methods of avoidance and minimisation of such risky situations. AB Inbev was chosen as an example since I was working in the branch of this company located in Prague, Czech Republic. This explains my concentration mainly on the market for beverages.
Automation of Noise Measurements Using XL2 Sounl Level Meter
Švihálek, Filip ; Číž, Radim (referee) ; Schimmel, Jiří (advisor)
This bachelor´s thesis focuses on noise measurement, characterizes used quantities and uncertainties due to the measument of these quantities. The goal is to develop application, which will automate measurement with sound level meter XL2. Automation will use text output of the XL2 and modul for Remote Measurement. Application is developed in development environment Visual Basic for Applications.

National Repository of Grey Literature : 12 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.