|
|
Cyklocomputer with Altimeter
Čech, Tomáš ; Slanina, Martin (referee) ; Hermany, Jiří (advisor)
The target of the project is to get acquainted with parameters of magnetic sensors for impulse measurements and of atmospheric pressure sensors. Furthermore there is necessary to choose a proper microcontroller and LCD for measured values displaying. The equipment for bicycling will be projected and constructed afterwards. It will allow to display information on moved distance and also on its superelevation. All data will be stored in the memory. The project also includes microcontroller-PC communication by USB and data transmission from the memory.
|
|
|
Microprocesor controlled charger
Husník, Ondřej ; Ježek, Michal (referee) ; Kovář, Jan (advisor)
This thesis deals with design of microprocessor controlled battery charger with support of NiCd, NiMH and Li-Ion cells. The project focus is aimed within circuits design at algorithm of charge detection implemented into microprocessor. User interface is formed by PC application which communicates with charger via USB. PC connection allows recording of charging characteristics behaviour. The result of thesis is completely designed and created battery charger including microprocessor and PC application source codes.
|
|
|
Design of regulated laboratory source with current measurement
Panáček, Jiří ; Šteffan, Pavel (referee) ; Magát, Martin (advisor)
This bachelor thesis deals with problematic and design of linear laboratory power supply. The first impulse start design of this device was requirement of simple and low cost laboratory power supply with good performance for debugging and measuring electronic circuits. This design keeps modern trend in lab power supplies with driving via microcontroller. This solution makes device easy to control and it is possible change program equipment.
|
|
|
Design and Realization of Device-Prototype for Multi-Channel Monitoring of Measured Quantities via USB
Nevoral, Jan ; Kunovský, Jiří (referee) ; Strnadel, Josef (advisor)
The aim of this work is design and construction of a device based on microcontroller Freescale MC9S08JM60 that will extend laboratory kit used in the lab of Computer Hardware course at FIT BUT. The device allows monitoring of several measured quantities and sending the measured values to a computer via USB. The first part presents the current laboratory kit and used microcontroller. The second part contains device’s design including schematic, PCB and a list of used electronic components, a description of implementation of firmware for the microcontroller in C and control application written in C#. This application receives the measured data samples from the device and visualizes them to demonstrate the functionality of the device. In the last part of the bachelor’s thesis there are proposed steps to upgrade the laboratory kit based on this device, contained its evaluation and possible extensions.
|
|
|
USB communication protocol analysis
Zošiak, Dušan ; Fujcik, Lukáš (referee) ; Šteffan, Pavel (advisor)
Tato práce je zaměřena na zpracování a analýzu USB komunikačního protokolu a implementace jeho jednotlivých částí do FPGA obvodu s využitím programovacího jazyka VHDL. Ve finální podobě by měla práce představovat souhrnný a ucelený dokument popisující principy USB rozhraní a jeho komunikace doplněných praktickým návrhem v jazyce VHDL, který by byl schopen převést data do USB.
|
|
|
Design and Realization of Device-Prototype for Multi-Channel Monitoring of Measured Quantities via USB
Nevoral, Jan ; Kunovský, Jiří (referee) ; Strnadel, Josef (advisor)
The aim of this work is design and construction of a device based on microcontroller Freescale MC9S08JM60 that will extend laboratory kit used in the lab of Computer Hardware course at FIT BUT. The device allows monitoring of several measured quantities and sending the measured values to a computer via USB. The first part presents the current laboratory kit and used microcontroller. The second part contains device’s design including schematic, PCB and a list of used electronic components, a description of implementation of firmware for the microcontroller in C and control application written in C#. This application receives the measured data samples from the device and visualizes them to demonstrate the functionality of the device. In the last part of the bachelor’s thesis there are proposed steps to upgrade the laboratory kit based on this device, contained its evaluation and possible extensions.
|
|
|
Cyklocomputer with Altimeter
Čech, Tomáš ; Slanina, Martin (referee) ; Hermany, Jiří (advisor)
The target of the project is to get acquainted with parameters of magnetic sensors for impulse measurements and of atmospheric pressure sensors. Furthermore there is necessary to choose a proper microcontroller and LCD for measured values displaying. The equipment for bicycling will be projected and constructed afterwards. It will allow to display information on moved distance and also on its superelevation. All data will be stored in the memory. The project also includes microcontroller-PC communication by USB and data transmission from the memory.
|
|
|
Microprocesor controlled charger
Husník, Ondřej ; Ježek, Michal (referee) ; Kovář, Jan (advisor)
This thesis deals with design of microprocessor controlled battery charger with support of NiCd, NiMH and Li-Ion cells. The project focus is aimed within circuits design at algorithm of charge detection implemented into microprocessor. User interface is formed by PC application which communicates with charger via USB. PC connection allows recording of charging characteristics behaviour. The result of thesis is completely designed and created battery charger including microprocessor and PC application source codes.
|
|
|
USB communication protocol analysis
Zošiak, Dušan ; Fujcik, Lukáš (referee) ; Šteffan, Pavel (advisor)
Tato práce je zaměřena na zpracování a analýzu USB komunikačního protokolu a implementace jeho jednotlivých částí do FPGA obvodu s využitím programovacího jazyka VHDL. Ve finální podobě by měla práce představovat souhrnný a ucelený dokument popisující principy USB rozhraní a jeho komunikace doplněných praktickým návrhem v jazyce VHDL, který by byl schopen převést data do USB.
|
|
|
Design of regulated laboratory source with current measurement
Panáček, Jiří ; Šteffan, Pavel (referee) ; Magát, Martin (advisor)
This bachelor thesis deals with problematic and design of linear laboratory power supply. The first impulse start design of this device was requirement of simple and low cost laboratory power supply with good performance for debugging and measuring electronic circuits. This design keeps modern trend in lab power supplies with driving via microcontroller. This solution makes device easy to control and it is possible change program equipment.
|
guest ::
